| Home | Forums | Reviews | Guides | Newsgroups | Register | Search |
 |
| Thread Tools |
|
Junior Member
Join Date: Nov 2007
Posts: 7
|
Hi,
I need to set up a static route which points to loopback interface. I've been googling around for couple of hours without any luck  .Does anyone know how to enable this interface? when I type 'show interface' it only shows: "interface ethernet0 "outside" is up, line protocol is up ...." "interface ethernet1 "inside" is up, line protocol is up ..." when I try to type "show interface loopback0" the CLI won't accept the command. pixfirewall# sh ver Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4) Compiled on Thu 04-Aug-05 21:40 by morlee pixfirewall up 1 hour 53 mins Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz I will be very appreciate for any help. Thanks Tom |
|
|
|
|||
|
|
| |
|
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| MAC OS X using Cisco VPN Client through CISCO PIX 501 | InetSecurity | Cisco | 0 | 06-23-2006 01:57 AM |
| Cisco pix 501 vs 501-50 | cdoc | Cisco | 6 | 05-20-2006 03:53 AM |
| PIX 501 <-> PIX 501 - Problem contating private networks on the inside | Andre | Cisco | 7 | 02-20-2005 07:02 PM |
| Cisco PIX 501 using pptp to connect to cisco vpn 3005 concentrator | Kai | Cisco | 1 | 05-14-2004 02:44 PM |
| Cisco VPN through a PIX 501 to another PIX? | Andrew J Instone-Cowie | Cisco | 5 | 01-22-2004 05:44 PM |
