|
|
|
|
11-01-2007, 10:53 AM
|
#1 |
Need help, VLAN on Cisco Switch
Hi folks,
I have a problem with my Cisco Switchs. I have 2 cisco 2960 and 1 Cisco 3750. I made VTP and VLANs config on 3 Switches. When clients connected to 2960 acquire IP from the DHCP server their connection to the LAN is too slow.For example when clients work with the network ping time of the VALN's ip is more than 500 ms. Reply from 172.16.3.1: bytes=32 time=553ms TTL=60 Reply from 172.16.3.1: bytes=32 time=552ms TTL=60 Reply from 172.16.3.1: bytes=32 time=535ms TTL=60 I use ip address y.y.y.y and ip-hellper x.x.x.x on Core Switche (3750) for eache VALN. Should I add any other commands on my 3750 switch or on the 2960 ? Thanks for any guide. mf1509 |
|
|
|
|
11-28-2007, 02:30 PM
|
#2 |
|
Junior Member
Join Date: Nov 2007
Posts: 3
|
have you checked the ping response of the server from switch.also check the response of the L3 switch from L2 switch.
I think the problem faced by you is not because of the config on switches. You can cross check this by giving static ip to one of the host. regards, Veneet vthakur001 |
|
|
|
|
06-13-2008, 02:18 PM
|
#3 |
|
Junior Member
Join Date: Jun 2008
Posts: 17
  |
Hi All
We are specialized in new network products, including switch, firewall, router, GBIC,SFP,WIC,cables etc... We provide high quality products and the most reasonable price with professional services to our customers. So if you are interested in any of our products, please contact with me,we will try our best for you,thanks! example of the products: WS-G5483, WS-G5487, WS-G5484, WS-G5486, GLC-SX-MM, GLC-LH-SM, GLC-ZX-SM, GLC-T, ...... NM-2FE2W-T1, NM-2FE2W-E1, NM-2FE2W-V2, WIC-1T, WIC-2T, WIC-2A/S, WIC-1B/ST, WIC-1ENET, VWIC-1MFT-T1, VWIC-1MFT-E1, VWIC-2MFT-T1, VWIC-2MFT-E1, VWIC-1MFT-G703, VWIC-2MFT-G703, VWIC-1MFT-T1-DI, VWIC-2MFT-T1-DI, NM-1E, NM-4E, ...... WS-C2950-24, WS-C2950T-24, WS-C2950G-24-EI, WS-C2950G-48-EI, ...... CONSOLE CABLE, CAB-STACK-1M/3M, CAB-V35MT, CAB-V35FC, CAB-SS-V.35MT, CAB-SS-V.35FC, CAB-SS-232MT, CAB-SS-232FC, CAB-232MT, CAB-232FC, CAB-SS-X21MT, CAB-SS-X21FC, CAB-X21MT, ...... MEM-npe400-512MB, MEM-3660-128mb, MEM2600-32D, MEM2600-16FS, MEM2600XM-64D, MEM-S1-128MB, MEM-S2-256MB, MEM-S2-512MB, MEM-MSFC-128MB, MEM2801-256D, MEM3800-256D, MEM3800-512, MEM3745-256D, MEM1841-256D, MEM180X-256D, WS-X6K-MSFC2-KIT, .... and so on. Regards Helen.Zhou www.nstnetwork.com MSN: Email: AOL helenxuezhou Icq 320-880-606 Helenzhou |
|
|
|
 |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cisco 6509, SUP2, IPv6, upgrade IOS failed | fabianV | Hardware | 0 | 07-06-2009 04:33 PM |
| Cisco 2950 switch VLAN problem | Slava | Hardware | 0 | 05-19-2009 05:16 AM |
| Pix515E, cisco switch 2960, 2950 | Ariun | Hardware | 0 | 09-24-2008 09:43 AM |
| Dlink Layer 3 Switch VLAN Config | djguruji | General Help Related Topics | 0 | 02-21-2008 09:21 AM |
| RE:used Cisco network router switch supply | wenwen | Hardware | 0 | 10-27-2006 03:53 AM |
