![]() |
|
|
|||||||
![]() |
Wireless Networking - Portable wireless cannot see or be seen (by) other PCs in the grou |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
I have a network at home through a D-Link wired DI-707P router where every PC
can see each other, and go to internet. I recently added a wireless D-Link DI-524 router which is configured as an access point, so I can use a wireless portable. The DI-524 go to the DI-707P. The portable can connect to internet with no problem: so the DI-524 seems well configured as access point. (There is also a VoIP adapter connected to the DI-524, so *yes* it work). My wireless acces is secured (following the instructions you provided as well). The only remaining issue: I cannot see (or access) my other computers on the home network with the portable,nor can I see or access the portable from those other PCs. I named the portable as part of the same workgroup, gave it a IP adress compatible with the others, submask, and so on. Again, please keep in mind that the portable go through the DI-524, then the DI-707P and the latest go through ADSL modem, and go to web. Would you have any insight or suggestions about it ? Thanks, Rob =?Utf-8?B?Um9i?= |
|
|
|
|
#2 |
|
Posts: n/a
|
On Sun, 22 Jan 2006 20:25:02 -0800, Rob <> wrote:
>I have a network at home through a D-Link wired DI-707P router where every PC >can see each other, and go to internet. > >I recently added a wireless D-Link DI-524 router which is configured as an >access point, so I can use a wireless portable. The DI-524 go to the DI-707P. This MAY be similar to what happened to me, and if so is caused by two different addresses, so go to my online notes at http://www.pacifier.com/~jtsmith/ADOBE.HTM and click the link near the top for Wireless networking J |
|
|
|
#3 |
|
Posts: n/a
|
Hi
May be this can Help, http://www.ezlan.net/sharing.html Jack (MVP-Networking). "Rob" <> wrote in message news:E08F0AB3-53A2-43BE-9A35-... >I have a network at home through a D-Link wired DI-707P router where every >PC > can see each other, and go to internet. > > I recently added a wireless D-Link DI-524 router which is configured as an > access point, so I can use a wireless portable. The DI-524 go to the > DI-707P. > > The portable can connect to internet with no problem: so the DI-524 seems > well configured as access point. (There is also a VoIP adapter connected > to > the DI-524, so *yes* it work). My wireless acces is secured (following > the > instructions you provided as well). > > The only remaining issue: I cannot see (or access) my other computers on > the > home network with the portable,nor can I see or access the portable from > those other PCs. I named the portable as part of the same workgroup, gave > it > a IP adress compatible with the others, submask, and so on. Again, please > keep in mind that the portable go through the DI-524, then the DI-707P and > the latest go through ADSL modem, and go to web. > > Would you have any insight or suggestions about it ? > > Thanks, > > Rob Jack \(MVP-Networking\). |
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Notebook + dial up modem + wireless router = wireless network ? | fujikoma_2008 | Hardware | 1 | 02-21-2008 04:02 PM |
| Help: Cant go wireless with usb 2.0 adapter | tucuxi | Hardware | 0 | 07-31-2007 08:39 PM |
| Setting up a Network -- Wired or Wireless? | shopzero.net | DVD Video | 1 | 07-24-2006 07:18 PM |
| Re: adding wireless to a wired network | AG | A+ Certification | 3 | 01-14-2005 08:52 AM |
| Re: adding wireless to a wired network | Remo | A+ Certification | 0 | 01-07-2005 06:31 PM |