«

I've run into the limits of my tech skills and was hoping someone
could help. I'm putting together a DSL connection for a satellite
office to offset the slow WAN link we have to the facility. I've got
a 827 Router setup that I would like to use to route internet traffic
out to the internet. I don't, however, want to route out the local ip
traffic.

Given this setup:

campus switch: 192.168.3.5
Cisco 827 Router: 192.168.3.45

how would I go about achieving a simple routing table? Basically
anything on the 192.x.x.x network goes out to the switch, anything for
the internet goes out ATM0.

Would something like this work:

!
ip nat inside source list 1 interface Dialer0 overload
ip classless
ip route 192.0.0.0 255.0.0.0 eth0
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!

for a quick and dirty route?


Thanks.