Building a home lab for 2006.

Hello all,

I am looking into building a home lab. Trying to get a survey from folks of
the type of equipment they use at their home/work environment. Not looking
to use virtual machines (e.g. VMWare) as I want to interact with the
individual hardware too. I understand the cost benefit, but in the end, it
isn't what I'm looking for. I want to take 70-270 by the end of January, and
want to get my MCSE/MCDBA by the end of the year at the latest....by the end
of the summer earliest. It is finally happening....the B$ is over.
Merry Christmas and Happy Holidays to all....

Cruz
CompTIA A+ Certified, CompTIA Network+ Cerfied
(After first the Microsoft exams....these puppies make me an
MCSA.....suweeet)

CG101

If you can go with a kvm switch, check out eBay for the best hardware deals.
I just bought an XP2600+ / FX5200 / 512M / 80G HD / 350W PS / CDRW for $250
(+$25 shipping). You might have to look around while for a deal that good,
but it's worth the bother. Ideal home setup for a MS lab - 2 DCs, as many
workstations as you can have, maybe a Linux box for BIND, etc. Also bought
an 8 port KVM with cables for $100.00.

....kurt

"CG101" <> wrote in message
news:uOCrf.10114$...
> Hello all,
>
> I am looking into building a home lab. Trying to get a survey from folks
> of
> the type of equipment they use at their home/work environment. Not looking
> to use virtual machines (e.g. VMWare) as I want to interact with the
> individual hardware too. I understand the cost benefit, but in the end, it
> isn't what I'm looking for. I want to take 70-270 by the end of January,
> and
> want to get my MCSE/MCDBA by the end of the year at the latest....by the
> end
> of the summer earliest. It is finally happening....the B$ is over.
> Merry Christmas and Happy Holidays to all....
>
> Cruz
> CompTIA A+ Certified, CompTIA Network+ Cerfied
> (After first the Microsoft exams....these puppies make me an
> MCSA.....suweeet)
>
>

Kurt

Three computers and at least two monitors. You can use a cheap electrical
KVM switch for two computers to share a monitor if need be. You can buy
cheap used computers on Ebay for $100 or less that work well. Have them all
networked and connected to the internet via an internet router. Also get
some removable drive trays and extra hard drives all in double or triple
boot configuration and you can cover almost every possibility. Depending on
your budget and what you want to learn also get a real firewall, a real
managed switch, and maybe a real router. There are Netscreen 5XP firewalls
with latest firmware on Ebay for around $80, lots of older Cisco routers
that route well but only at 10MB, and lots of used HP Procurve/Cisco
switches on Ebay for reasonable prices. I am not sure which Cisco router is
best to learn on a budget these days but the 2514 with all the accessories
and late firmware, maximum memory, and transceivers used to be a good
choice and should be found for around $150 or so on Ebay. --- Steve

http://search.ebay.com/search/search...=netscreen+5xp ---
Netscreen 5XP
http://www.geeks.com/details.asp?invtid=GN210&cat=HDD --- drive trays

"CG101" <> wrote in message
news:uOCrf.10114$...
> Hello all,
>
> I am looking into building a home lab. Trying to get a survey from folks
> of
> the type of equipment they use at their home/work environment. Not looking
> to use virtual machines (e.g. VMWare) as I want to interact with the
> individual hardware too. I understand the cost benefit, but in the end, it
> isn't what I'm looking for. I want to take 70-270 by the end of January,
> and
> want to get my MCSE/MCDBA by the end of the year at the latest....by the
> end
> of the summer earliest. It is finally happening....the B$ is over.
> Merry Christmas and Happy Holidays to all....
>
> Cruz
> CompTIA A+ Certified, CompTIA Network+ Cerfied
> (After first the Microsoft exams....these puppies make me an
> MCSA.....suweeet)
>
>

Steven L Umbach

Yeah I will be dealing with a KVM setup...no need to spend on extra
monitors, etc.

Tell me something, would it be necessary to have one client box for Linux in
a Windows setup? I'm not familiar with BIND or any UNIX services. I was told
that it might be important to set up printing through a Unix box, so I'm not
sure if this is what you meant. I got familiar with Unix/Linux when I was
studying for my Network+. Linux I'm sure is something I would get into later
but I'm trying to concentrate on Microsoft right now. Please excuse my
ignorance and I'm gonna start hunting for cheap boxes on eBay now.

Cruz
CompTIA A+ Certified, CompTIA Network+ Certified
"Kurt" <> wrote in message
news:...
> If you can go with a kvm switch, check out eBay for the best hardware
deals.
> I just bought an XP2600+ / FX5200 / 512M / 80G HD / 350W PS / CDRW for
$250
> (+$25 shipping). You might have to look around while for a deal that
good,
> but it's worth the bother. Ideal home setup for a MS lab - 2 DCs, as many
> workstations as you can have, maybe a Linux box for BIND, etc. Also bought
> an 8 port KVM with cables for $100.00.
>
> ...kurt
>
> "CG101" <> wrote in message
> news:uOCrf.10114$...
> > Hello all,
> >
> > I am looking into building a home lab. Trying to get a survey from folks
> > of
> > the type of equipment they use at their home/work environment. Not
looking
> > to use virtual machines (e.g. VMWare) as I want to interact with the
> > individual hardware too. I understand the cost benefit, but in the end,
it
> > isn't what I'm looking for. I want to take 70-270 by the end of January,
> > and
> > want to get my MCSE/MCDBA by the end of the year at the latest....by the
> > end
> > of the summer earliest. It is finally happening....the B$ is over.
> > Merry Christmas and Happy Holidays to all....
> >
> > Cruz
> > CompTIA A+ Certified, CompTIA Network+ Cerfied
> > (After first the Microsoft exams....these puppies make me an
> > MCSA.....suweeet)
> >
> >
>
>

CG101

I am not looking into (right now) to learn Cisco. I was hoping to get away
with maybe a fake router/firewall (e.g. Linksys or Netgear). I don't want to
take away my focus of studying for my MCSE. Once I get my MCSE (or maybe A),
I may upgrade the fake stuff for some real deals (the firewall/intelligent
switch/router setup) and earn my CCNA. However I'm more interested in
earning my MCSE then MCDBA then learning SQL Server 2005 to upgrade to the
new certification. The other suggestions look good though and I will be
looking into Ebay for those items. If you can advise me on anything else
concerning the lab (or if I'm wrong in my thinking) please let me know. I
may just be thinking with my wallet instead of what is proper.

Cruz
CompTIA A+ Certified, CompTIA Network+ Certified
"Steven L Umbach" <> wrote in message
news:rM2dnfbz3Jo-FDLeRVn-...
> Three computers and at least two monitors. You can use a cheap electrical
> KVM switch for two computers to share a monitor if need be. You can buy
> cheap used computers on Ebay for $100 or less that work well. Have them
all
> networked and connected to the internet via an internet router. Also get
> some removable drive trays and extra hard drives all in double or triple
> boot configuration and you can cover almost every possibility. Depending
on
> your budget and what you want to learn also get a real firewall, a real
> managed switch, and maybe a real router. There are Netscreen 5XP firewalls
> with latest firmware on Ebay for around $80, lots of older Cisco routers
> that route well but only at 10MB, and lots of used HP Procurve/Cisco
> switches on Ebay for reasonable prices. I am not sure which Cisco router
is
> best to learn on a budget these days but the 2514 with all the accessories
> and late firmware, maximum memory, and transceivers used to be a good
> choice and should be found for around $150 or so on Ebay. --- Steve
>
>
ttp://search.ebay.com/search/search.dll?from=R40&satitle=netscreen+5xp ---
> Netscreen 5XP
> http://www.geeks.com/details.asp?invtid=GN210&cat=HDD --- drive trays
>
> "CG101" <> wrote in message
> news:uOCrf.10114$...
> > Hello all,
> >
> > I am looking into building a home lab. Trying to get a survey from folks
> > of
> > the type of equipment they use at their home/work environment. Not
looking
> > to use virtual machines (e.g. VMWare) as I want to interact with the
> > individual hardware too. I understand the cost benefit, but in the end,
it
> > isn't what I'm looking for. I want to take 70-270 by the end of January,
> > and
> > want to get my MCSE/MCDBA by the end of the year at the latest....by the
> > end
> > of the summer earliest. It is finally happening....the B$ is over.
> > Merry Christmas and Happy Holidays to all....
> >
> > Cruz
> > CompTIA A+ Certified, CompTIA Network+ Cerfied
> > (After first the Microsoft exams....these puppies make me an
> > MCSA.....suweeet)
> >
> >
>
>

CG101

IN my experience, the MS tests ask a few general questions about Linux /
Unix interoperability, but having a *nix box isn't necessary to pass the
test.

....kurt

"CG101" <> wrote in message
news:BULrf.6580$...
> Yeah I will be dealing with a KVM setup...no need to spend on extra
> monitors, etc.
>
> Tell me something, would it be necessary to have one client box for Linux
> in
> a Windows setup? I'm not familiar with BIND or any UNIX services. I was
> told
> that it might be important to set up printing through a Unix box, so I'm
> not
> sure if this is what you meant. I got familiar with Unix/Linux when I was
> studying for my Network+. Linux I'm sure is something I would get into
> later
> but I'm trying to concentrate on Microsoft right now. Please excuse my
> ignorance and I'm gonna start hunting for cheap boxes on eBay now.
>
> Cruz
> CompTIA A+ Certified, CompTIA Network+ Certified
> "Kurt" <> wrote in message
> news:...
>> If you can go with a kvm switch, check out eBay for the best hardware
> deals.
>> I just bought an XP2600+ / FX5200 / 512M / 80G HD / 350W PS / CDRW for
> $250
>> (+$25 shipping). You might have to look around while for a deal that
> good,
>> but it's worth the bother. Ideal home setup for a MS lab - 2 DCs, as many
>> workstations as you can have, maybe a Linux box for BIND, etc. Also
>> bought
>> an 8 port KVM with cables for $100.00.
>>
>> ...kurt
>>
>> "CG101" <> wrote in message
>> news:uOCrf.10114$...
>> > Hello all,
>> >
>> > I am looking into building a home lab. Trying to get a survey from
>> > folks
>> > of
>> > the type of equipment they use at their home/work environment. Not
> looking
>> > to use virtual machines (e.g. VMWare) as I want to interact with the
>> > individual hardware too. I understand the cost benefit, but in the end,
> it
>> > isn't what I'm looking for. I want to take 70-270 by the end of
>> > January,
>> > and
>> > want to get my MCSE/MCDBA by the end of the year at the latest....by
>> > the
>> > end
>> > of the summer earliest. It is finally happening....the B$ is over.
>> > Merry Christmas and Happy Holidays to all....
>> >
>> > Cruz
>> > CompTIA A+ Certified, CompTIA Network+ Cerfied
>> > (After first the Microsoft exams....these puppies make me an
>> > MCSA.....suweeet)
>> >
>> >
>>
>>
>
>

Kurt

It would benefit you to be able to set up routed connections to simulate
sites, subnets, routed trusts, etc. A cheap router will do as long as it can
be configured as a true router (NOT just one-way NAT). The $50.00 broadband
routers are generally one-trick ponys.

....kurt

"CG101" <> wrote in message
news:R6Mrf.10166$...
>I am not looking into (right now) to learn Cisco. I was hoping to get away
> with maybe a fake router/firewall (e.g. Linksys or Netgear). I don't want
> to
> take away my focus of studying for my MCSE. Once I get my MCSE (or maybe
> A),
> I may upgrade the fake stuff for some real deals (the firewall/intelligent
> switch/router setup) and earn my CCNA. However I'm more interested in
> earning my MCSE then MCDBA then learning SQL Server 2005 to upgrade to the
> new certification. The other suggestions look good though and I will be
> looking into Ebay for those items. If you can advise me on anything else
> concerning the lab (or if I'm wrong in my thinking) please let me know. I
> may just be thinking with my wallet instead of what is proper.
>
> Cruz
> CompTIA A+ Certified, CompTIA Network+ Certified
> "Steven L Umbach" <> wrote in message
> news:rM2dnfbz3Jo-FDLeRVn-...
>> Three computers and at least two monitors. You can use a cheap electrical
>> KVM switch for two computers to share a monitor if need be. You can buy
>> cheap used computers on Ebay for $100 or less that work well. Have them
> all
>> networked and connected to the internet via an internet router. Also get
>> some removable drive trays and extra hard drives all in double or triple
>> boot configuration and you can cover almost every possibility. Depending
> on
>> your budget and what you want to learn also get a real firewall, a real
>> managed switch, and maybe a real router. There are Netscreen 5XP
>> firewalls
>> with latest firmware on Ebay for around $80, lots of older Cisco routers
>> that route well but only at 10MB, and lots of used HP Procurve/Cisco
>> switches on Ebay for reasonable prices. I am not sure which Cisco router
> is
>> best to learn on a budget these days but the 2514 with all the
>> accessories
>> and late firmware, maximum memory, and transceivers used to be a good
>> choice and should be found for around $150 or so on Ebay. --- Steve
>>
>>
>
> tp://search.ebay.com/search/search.dll?from=R40&satitle=netscreen+5xp ---
>> Netscreen 5XP
>> http://www.geeks.com/details.asp?invtid=GN210&cat=HDD --- drive trays
>>
>> "CG101" <> wrote in message
>> news:uOCrf.10114$...
>> > Hello all,
>> >
>> > I am looking into building a home lab. Trying to get a survey from
>> > folks
>> > of
>> > the type of equipment they use at their home/work environment. Not
> looking
>> > to use virtual machines (e.g. VMWare) as I want to interact with the
>> > individual hardware too. I understand the cost benefit, but in the end,
> it
>> > isn't what I'm looking for. I want to take 70-270 by the end of
>> > January,
>> > and
>> > want to get my MCSE/MCDBA by the end of the year at the latest....by
>> > the
>> > end
>> > of the summer earliest. It is finally happening....the B$ is over.
>> > Merry Christmas and Happy Holidays to all....
>> >
>> > Cruz
>> > CompTIA A+ Certified, CompTIA Network+ Cerfied
>> > (After first the Microsoft exams....these puppies make me an
>> > MCSA.....suweeet)
>> >
>> >
>>
>>
>
>

Kurt

did you hear "CG101" <> say in
news:uOCrf.10114$:

> I am looking into building a home lab. Trying to get a survey from
> folks of the type of equipment they use at their home/work
> environment.

If I'm using actual hardware, I use 3 desktop PCs (HP Evo 510s withs
2.4Ghz procs and 1Gb of RAM each) on a separate segment. 1 client, 1 DC
and since I am learning more about SQL 2005 these days (on to SSAS, SSRS
and SSIS) a member server running the product of choice - in this case
SQL 2005. This also gives me the flexability to run SQL on the DC as well
to try things like Replication, DB Mirroring, etc. I could be doing this
off of instances on the same box, but it's like learning networking using
the loopback adapter.

I use a KVM as well. I don't have unlimited real estate...

> Not looking to use virtual machines (e.g. VMWare) as I
> want to interact with the individual hardware too.

This is just crazy talk IMHO. Yes I have the 3 servers, but I will from
time to time through Virtual Server on the box as this allows me to try
out the clustering schtuff too. There are benefits to VMs.

--
Neil MCNGP#30

- I'm out of bed and dressed. What more do you want?

Neil

did you hear "CG101" <> say in
news:R6Mrf.10166$:

> Once I get my MCSE (or maybe A),
> I may upgrade the fake stuff for some real deals (the
> firewall/intelligent switch/router setup) and earn my CCNA.

make sure you use actual Cisco gear to get the Cert. e-bay is a wonder...

--
Neil MCNGP#30

- What are you doing?!? The message is over. GO AWAY!

Neil

This also gives me the flexability to run SQL on the DC as well
> to try things like Replication, DB Mirroring, etc. I could be doing this
> off of instances on the same box, but it's like learning networking using
> the loopback adapter.

I am curious...every production DC I've worked on never had apps on it (I
can fathom because it was due to stability issues). Our Exchange 2K3 servers
we have at work are on seperate clusters but within our W2K3 forrest. How
does putting SQL 2K5 on a DC give you flexibility? I am not suggesting by
any means this is wrong as I know some shops do have apps on DCs, but the
only things I've seen the DCs used for would be WINS, DNS, DHCP, etc...but
apps on member servers.

> Not looking to use virtual machines (e.g. VMWare) as I
> want to interact with the individual hardware too.

>>This is just crazy talk IMHO. Yes I have the 3 servers, but I >>will from
>>time to time through Virtual Server on the box as this allows me >>to try
>>out the clustering schtuff too. There are benefits to VMs.

VMs are something I may deal with, but I would feel more comfortable with
real boxes first. Virtualization is the future. Blade server farms and SANs
are being purchased simply for the purpose. It is something I wish to get
into as well as way to help clients save money. However I have to play catch
up with myself if I wish to even deal with that. I'm akin to being an
unlicensed plumber that does excellent plumbing work (words of my past and
current employers...I can't tout my own horn)....but I can't join the
plumbers union unless I get that piece of paper. My experience plus future
certs will correct that...but now I wish to design my own infrastructure as
opposed to maintaining (usually) someone else's mess. Your advice is valid,
and will keep that in mind when I begin the process. For that I thank you.

CG101