|
|
|
|
08-29-2007, 04:43 PM
|
#1 |
Cisco 506E PIX/Firewall Question
Hello everyone.
I am configuring our new Cisco 506E PIX/Firewall. I logged into it via the web interface, changed the IP to 10.5.0.11 hit apply and got bumped off (I assume because I changed the IP) but now I can't reconnect to it. I have a laptop connected directly to the device via Ethernet1. I rebooted both laptop and firewall. I verified that the inside IP is set correctly via hyperterminal so why am I not able to reconnect via the web interface? Many thanks! Uberwilhelm |
|
|
|
|
08-29-2007, 08:37 PM
|
#2 |
|
Junior Member
Join Date: Aug 2007
Posts: 2
  |
did you try making sure your laptop is on the same network as the pix?
tfugnitti |
|
|
|
|
08-30-2007, 01:30 PM
|
#3 |
|
Junior Member
Join Date: Aug 2007
Posts: 2
|
Sorry, I meant to post my solution. I was not aware that the HTTP address has to match the PDM home address. After many hours of trial I finally got it to work. Thanks!
Uberwilhelm |
|
|
|
 |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cisco PIX 506e Firewall - Routing | jnk | General Help Related Topics | 1 | 05-29-2009 06:04 PM |
| Cisco Pix 506E CPU upgrade? | twoblink | Hardware | 3 | 09-20-2008 05:06 PM |
| Cisco PIX 506e VPM | kreck621 | Hardware | 1 | 09-14-2007 02:30 PM |
| Cisco OID question | yapsuepr | Hardware | 0 | 03-19-2007 01:55 PM |
| Cisco 506e multiple external IPs? | Archo | Hardware | 1 | 09-26-2006 02:20 PM |
