Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Syslog port to MAC address changes on a Catalyst 35xx?

Reply
Thread Tools

Syslog port to MAC address changes on a Catalyst 35xx?

 
 
Hoffa
Guest
Posts: n/a
 
      08-20-2007
Hi all

I just wounder if this is possible, I have done some brief research
and haven't found a clear solution on this.
I have several Cat 3548XL running IOS 12.0(5), all these are used as
access switches and are syslogging to a central server. We are not
running any NACsystems.
What I would like to see is the switches send the MAC address of the
computer connecting to a port, for example when a stationary computer
is powered on. Is this possible?

Regards
Fredrik Hofgren

 
Reply With Quote
 
 
 
 
Bod43@hotmail.co.uk
Guest
Posts: n/a
 
      08-20-2007
On 20 Aug, 11:38, Hoffa <(E-Mail Removed)> wrote:
> Hi all
>
> I just wounder if this is possible, I have done some brief research
> and haven't found a clear solution on this.
> I have several Cat 3548XL running IOS 12.0(5), all these are used as
> access switches and are syslogging to a central server. We are not
> running any NACsystems.
> What I would like to see is the switches send the MAC address of the
> computer connecting to a port, for example when a stationary computer
> is powered on. Is this possible?
>


You will not ba able to do this on the switch.

You will be able to achieve this result by gathering information from
the switch using say SNMP and processing it on a seperate computer.



 
Reply With Quote
 
 
 
 
Vazago Vicente
Guest
Posts: n/a
 
      11-03-2007
Hoffa wrote:
> Hi all
>
> I just wounder if this is possible, I have done some brief research
> and haven't found a clear solution on this.
> I have several Cat 3548XL running IOS 12.0(5), all these are used as
> access switches and are syslogging to a central server. We are not
> running any NACsystems.
> What I would like to see is the switches send the MAC address of the
> computer connecting to a port, for example when a stationary computer
> is powered on. Is this possible?
>
> Regards
> Fredrik Hofgren
>

Perhaps you can try TCL script to do that

http://www.cisco.com/en/US/products/...html#wp1027195
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Differnce between setting mac address port security under theinterface vs. the mac address-table global command ttripp Cisco 5 02-05-2010 10:49 PM
perl 5.8.8 make test hangs on ext/Sys/Syslog/t/syslog................... indefinitely Bad Dog Perl Misc 0 08-09-2007 04:47 PM
Cisco Catalyst 3560 / IOS 12.2-25-SEE / Accessing Port-Security Mac-Adresses via SNMP Manuel Gaus Cisco 0 12-01-2006 05:54 PM
is there any API available to implement Syslog server using Java (to capture all syslog messages - UDP protocol, port 514)? santa19992000@yahoo.com Java 2 06-20-2006 12:54 PM
Syslog replay script for centralized syslog host leroy isaac Perl Misc 1 10-29-2004 04:23 AM



Advertisments