Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > 5500 module

Reply
Thread Tools

5500 module

 
 
ufik
Guest
Posts: n/a
 
      08-06-2007
Hello,

What is mean faulty status. It is hardware problem or something else.
Is it normal status for Supervisor?

5500> (enable) sh module
Mod Slot Ports Module-Type Model Sub
Status
--- ---- ----- ------------------------- ------------------- ---
--------
1 1 2 1000BaseSX Supervisor WS-X5530 yes
faulty
2 2 Gigabit Ethernet Ext WS-X5410
3 3 9 Gigabit Ethernet WS-X5410 no ok
6 6 12 100BaseFX MM Ethernet WS-X5201 no ok
7 7 1 Route Switch WS-X5302 no ok
8 8 12 10BaseFL Ethernet WS-X5011 no ok
9 9 12 100BaseFX MM Ethernet WS-X5111 no ok
10 10 24 10/100BaseTX Ethernet WS-X5224 no ok
11 11 36 10/100BaseTX Ethernet WS-X5239 no ok
12 12 36 10/100BaseTX Ethernet WS-X5239 no ok

Thank you for help.

 
Reply With Quote
 
 
 
 
make
Guest
Posts: n/a
 
      08-06-2007
What about "show test 1" ?
"show test diaglevel" ?
"show system" ?


> What is mean faulty status. It is hardware problem or something else.
> Is it normal status for Supervisor?
>
> 5500> (enable) sh module
> Mod Slot Ports Module-Type Model Sub
> Status
> --- ---- ----- ------------------------- ------------------- ---
> --------
> 1 1 2 1000BaseSX Supervisor WS-X5530 yes
> faulty
> 2 2 Gigabit Ethernet Ext WS-X5410
> 3 3 9 Gigabit Ethernet WS-X5410 no ok
> 6 6 12 100BaseFX MM Ethernet WS-X5201 no ok
> 7 7 1 Route Switch WS-X5302 no ok
> 8 8 12 10BaseFL Ethernet WS-X5011 no ok
> 9 9 12 100BaseFX MM Ethernet WS-X5111 no ok
> 10 10 24 10/100BaseTX Ethernet WS-X5224 no ok
> 11 11 36 10/100BaseTX Ethernet WS-X5239 no ok
> 12 12 36 10/100BaseTX Ethernet WS-X5239 no ok
>
> Thank you for help.
>

 
Reply With Quote
 
 
 
 
ufik
Guest
Posts: n/a
 
      08-06-2007
On 6 Sie, 19:45, make <(E-Mail Removed)> wrote:
> What about "show test 1" ?
> "show test diaglevel" ?
> "show system" ?
>
> > What is mean faulty status. It is hardware problem or something else.
> > Is it normal status for Supervisor?

>
> > 5500> (enable) sh module
> > Mod Slot Ports Module-Type Model Sub
> > Status
> > --- ---- ----- ------------------------- ------------------- ---
> > --------
> > 1 1 2 1000BaseSX Supervisor WS-X5530 yes
> > faulty
> > 2 2 Gigabit Ethernet Ext WS-X5410
> > 3 3 9 Gigabit Ethernet WS-X5410 no ok
> > 6 6 12 100BaseFX MM Ethernet WS-X5201 no ok
> > 7 7 1 Route Switch WS-X5302 no ok
> > 8 8 12 10BaseFL Ethernet WS-X5011 no ok
> > 9 9 12 100BaseFX MM Ethernet WS-X5111 no ok
> > 10 10 24 10/100BaseTX Ethernet WS-X5224 no ok
> > 11 11 36 10/100BaseTX Ethernet WS-X5239 no ok
> > 12 12 36 10/100BaseTX Ethernet WS-X5239 no ok

>
> > Thank you for help.


500> (enable) show test 1

Diagnostic mode: minimal (mode at next reset: minimal)


Module 1 : 2-port 1000BaseSX Supervisor
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U =
Unknown)
ROM: . Flash-EEPROM: . Ser-EEPROM: . NVRAM: . MCP Comm: .

EARL III Status :
DisableIndexLearnTest: .
DontLearnTest: .
DisableNewLearnTest: .
ConditionalLearnTest: .
MonitorColorFloodTest: .
EarlTrapTest: .
StaticMacAndTypeTest: .
BadDvlanTest: .
BadBpduTest: .
IndexMatchTest: .
ProtocolTypeTest: .
IgmpTest: .
SourceMissTest: .
SourceModifiedTest: .
ArpaToArpaShortcutTest: .
ArpaToSnapShortcutTest: .
SnapToArpaShortcutTest: .
SnapToSnapShortcutTest: .
SoftwareShortcutTest: .
MulticastExpansionTest: .
DontShortcutTest: .
ShortcutTableFullTest: .
ArpaToArpaShortcutTest(IPX): .
ArpaToSnapShortcutTest(IPX): .
ArpaToSapShortcutTest(IPX): .
ArpaToRawShortcutTest(IPX): .
SnapToArpaShortcutTest(IPX): .
SnapToSnapShortcutTest(IPX): .
SnapToSapShortcutTest(IPX): .
SapToArpaShortcutTest(IPX): .
SapToSnapShortcutTest(IPX): .
SapToSapShortcutTest(IPX): .
SapToRawShortcutTest(IPX): .
RawToArpaShortcutTest(IPX): .
RawToSnapShortcutTest(IPX): .
RawToSapShortcutTest(IPX): .
RawToRawShortcutTest(IPX): .
SoftwareShortcutTest(IPX): .
DontShortcutTest(IPX): .
ShortcutTableFullTest(IPX): .



Line Card Diag Status for Module 1 (. = Pass, F = Fail, N = N/A)
CPU : . Sprom : . Bootcsum : . Archsum : .
RAM : . LTL : . CBL : . DPRAM : .
SAMBA : .
Saints : N Pkt Bufs : . Repeater : N FLASH : .
Phoenix : . TrafficMeter: . UplinkSprom : . PhoenixSprom: .

PHOENIX Status :
Ports T1 R1 T2 R2
---------------------
. . . .

GIGMAC Status :
Ports 1 2
-----------
. .

PHOENIX Port Status :
Ports 9 17 18 19 20 21 22
INBAND A->B B->A B->C C->B A->C C->A
------------------------------------------
. . . . . . .

Packet Buffer Status :
Ports 1 2
-----------
. .

PHOENIX Packet Buffer Status :
Ports INBAND A<->B B<->C A<->C
------------------------------
. . . .

Loopback Status [Reported by Module 1] :
Ports 1 2 9
--------------
. . .

5500> (enable) show system
PS1-Status PS2-Status
---------- ----------
ok faulty

Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
---------- ---------- ---------- -------------- ---------
ok off faulty 0,04:51:43 20 min

PS1-Type PS2-Type
------------ ------------
WS-C5508 WS-C5508

Modem Baud Traffic Peak Peak-Time
------- ----- ------- ---- -------------------------
disable 9600 0% 2% Mon Aug 6 2007, 19:23:22

5500> (enable) show test diaglevel
Diagnostic mode at last bootup : minimal
Diagnostic mode at next reset : minimal

 
Reply With Quote
 
Scott Perry
Guest
Posts: n/a
 
      08-06-2007
A Cisco Catalyst 5500 series switch will report module 1, the supervisor, as
faulty when one of the two power supplies is not working.

Turn the other power supply on or else replace the power supply unit if it
has failed.

--

===========
Scott Perry
===========
Indianapolis, Indiana
________________________________________
"ufik" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> Hello,
>
> What is mean faulty status. It is hardware problem or something else.
> Is it normal status for Supervisor?
>
> 5500> (enable) sh module
> Mod Slot Ports Module-Type Model Sub
> Status
> --- ---- ----- ------------------------- ------------------- ---
> --------
> 1 1 2 1000BaseSX Supervisor WS-X5530 yes
> faulty
> 2 2 Gigabit Ethernet Ext WS-X5410
> 3 3 9 Gigabit Ethernet WS-X5410 no ok
> 6 6 12 100BaseFX MM Ethernet WS-X5201 no ok
> 7 7 1 Route Switch WS-X5302 no ok
> 8 8 12 10BaseFL Ethernet WS-X5011 no ok
> 9 9 12 100BaseFX MM Ethernet WS-X5111 no ok
> 10 10 24 10/100BaseTX Ethernet WS-X5224 no ok
> 11 11 36 10/100BaseTX Ethernet WS-X5239 no ok
> 12 12 36 10/100BaseTX Ethernet WS-X5239 no ok
>
> Thank you for help.
>



 
Reply With Quote
 
make
Guest
Posts: n/a
 
      08-07-2007
Its power supply 2.
> 5500> (enable) show system
> PS1-Status PS2-Status
> ---------- ----------
> ok faulty
>>> What is mean faulty status. It is hardware problem or something else.
>>> Is it normal status for Supervisor?
>>> 5500> (enable) sh module
>>> Mod Slot Ports Module-Type Model Sub
>>> Status
>>> --- ---- ----- ------------------------- ------------------- ---
>>> --------
>>> 1 1 2 1000BaseSX Supervisor WS-X5530 yes
>>> faulty

 
Reply With Quote
 
ufik
Guest
Posts: n/a
 
      08-07-2007
On 7 Sie, 05:47, make <(E-Mail Removed)> wrote:
> Its power supply 2.
> > 5500> (enable) show system
> > PS1-Status PS2-Status
> > ---------- ----------
> > ok faulty

>
>
>
> >>> What is mean faulty status. It is hardware problem or something else.
> >>> Is it normal status for Supervisor?
> >>> 5500> (enable) sh module
> >>> Mod Slot Ports Module-Type Model Sub
> >>> Status
> >>> --- ---- ----- ------------------------- ------------------- ---
> >>> --------
> >>> 1 1 2 1000BaseSX Supervisor WS-X5530 yes
> >>> faulty- Ukryj cytowany tekst -

>
> - Poka cytowany tekst -


Yes, now its ok
thank you

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
need info on supervisor engine module of cisco 5500 cheeku Cisco 7 05-19-2007 10:17 AM
Logitech Z-5500 Digital Speakers Silverstrand Front Page News 5 06-30-2005 05:34 PM
Re: Catalyst 5500, multicast floods Michele Cisco 0 04-08-2004 08:42 PM
Network Segregation on a 5500 (access-list) Dave Cisco 3 07-23-2003 09:48 PM
Slot 13 in a Catalyst 5500 JustMe Cisco 1 07-15-2003 12:02 AM



Advertisments