Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > VHDL > Hardware connection to FPGA

Thread Tools

Hardware connection to FPGA

shah_satish2002 shah_satish2002 is offline
Junior Member
Join Date: Jul 2007
Posts: 12

I need small help..

I have Encoder which has one input MTINP (3 bit/3 wire) and MTOUT (3 wire/3 bit).now i want to connect to this pins to FPGA(EP1C3 module)..if suppose i will rotate Encoder shaft then it will generate output..Now here i want to connect this output to FPGA (using VHDL)so i have made like..

MTOUT : in std_logic_vector(2 downto 0); // Output of Encoder is the input for FPGA

I need this output in FPGA for further i also need MTIN for some application in FPGA..But here i dont know how to define in VHDL..

MTIN : in std_logic_vector(2 downto 0);

is it correct ?? ie i declared MTIN as input for FPGA coz here its my input for Encoder.. am i right or wrong ?? i dont have logic diagram or any logic circuit because i will connect my encoder pin to FPGA but i dont know how to define MTIN and what precaution do i need ??

Thanks a lot..
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: FPGA BOARD FOR NEWBIE TO FPGA Oliver Mattos VHDL 0 02-02-2011 10:33 PM
FPGA BOARD FOR NEWBIE TO FPGA TheRightInfo VHDL 1 02-02-2011 11:19 AM
Connection of Camera With FPGA Saim General Computer Support 0 03-02-2009 03:40 PM
vhdl code generators ( crossposted in comp.hardware.fpga) abe VHDL 1 11-19-2008 05:54 PM
FPGA Central eNewsletter - LinkedIn, Write Articles, Post FREE Jobs,FPGA for Mobiles Vikram VHDL 0 07-24-2008 07:37 PM