Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > VHDL > xilinx ISE8.2 error: XST779

Reply
Thread Tools

xilinx ISE8.2 error: XST779

 
 
JayTee JayTee is offline
Junior Member
Join Date: Jul 2007
Posts: 2
 
      07-11-2007
Hi all,
I am getting this error during the synthesizing my design :

ERROR:Xst:779 - line 168: 'Others' is in unconstrained array aggregate.

my code is :

no_flow_counter : counter
generic map (
width => width_delay_before_no_flow_error,
counting_up => '0',
reset_counter_when_done => '0')
port map (
reset => reset,
clk_counter => clk_1s,
enable_in => no_flow_counter_enable,
start_value => no_flow_counter_start_value,
end_value => (others => '0'),
count_out => open,
done_out => missing_flow);

can_go_off_counter : counter
generic map (
width => width_delay_before_shutdown,
counting_up => '0',
reset_counter_when_done => '0')
port map (
reset => reset,
clk_counter => clk_1s,
enable_in => off_counter_enable,
start_value => off_counter_start_value,
end_value => (others => '0'),
count_out => open,
done_out => off_counter_finished);
why such an error occurs and how can i fix it?

Thanks in advance
 
Reply With Quote
 
 
 
 
sridar sridar is offline
Member
Join Date: Jun 2007
Posts: 52
 
      07-12-2007
hai,

you can't assign the values to multidimensional array using the statement (others=>'0').
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
xilinx ISE8.2 error: XST779 JayTee Hardware 1 07-11-2007 12:16 PM
Altera to Xilinx Ronny Hengst VHDL 1 07-24-2003 05:05 PM
xilinx logiblox and modelsim SE 5.6 Tim Terry VHDL 1 07-21-2003 03:25 PM
Xilinx synthetize problems Pedro Claro VHDL 7 07-10-2003 12:19 AM
Re: ModelSim 5.7 and xilinx libraries David Bishop VHDL 1 06-28-2003 04:53 PM



Advertisments