Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > General Computer Support > VLSM and EIGRP confussion

Reply
Thread Tools

VLSM and EIGRP confussion

 
 
XtreZ XtreZ is offline
Junior Member
Join Date: Jun 2007
Posts: 1
 
      06-29-2007
Hi. This is my first post here so please bear with me

I currently have 2 Cisco routers, let's call them A and B, running IOS Version 12.1(8b)E19, which currently are currently running EIGRP and BGP between them. They are interlinked with 2 DS3's which do load balancing per packet. I have almost not problems in terms of routing troubleshooting, but this one has me puzzled.

I have network 192.168.10.0/24 subeneted in routers as follows:

192.168.10.0/29 on router A
192.168.10.8/29 on router B
192.168.10.16/29 on router B
192.168.10.24/27 on router B
192.168.10.64/27 on router B
192.168.10.96/27 on router B

The only subnet I have a problem with is 192.168.10.24/27. It seems that in spite of having the network configured as a /27 (it's added in one active interface as "ip address 192.168.10.25 255.255.255.224 sec" ), the router only sees the ip as a /29. I can't ping anything beyond 192.168.10.31 and .31 replies as a broadcast address.

Furthermore, the routing table on both routers shows the first 8 ip's as members of a /27 block, but when ip check the route for 192.168.10.32 and beyond, it does not appear in the routing table.

Both routers have ip classless and ip subnet zero configured on them.

Is there a way to make the complete subnet appear in the routing table? or is it just the way VLSM works? Im aware that it's best to use the first ips of the /24 for the larger subnets, but I did not configure this. Im just trying to troubleshoot it but so far I have not found any contrete info which explains why this happens.

Both routers have eigrp configured as follows

router eigrp 100
no auto-summary
network 192.168.10.0
redistribute connected
no eigrp log-neighborgh-changes

Can anybody explain why this is?

Thanks.
 

Last edited by XtreZ; 06-29-2007 at 08:44 PM..
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
VLSM question please? daytime Cisco 6 01-10-2007 09:43 PM
EIGRP, Want to prevent any EIGRP traffic to a interface BG Cisco 3 02-09-2006 08:05 PM
70-291: Wrong VLSM study question? Corrado Labinaz MCSE 1 12-05-2004 05:30 AM
servlet confussion e4_java Java 3 12-02-2004 03:03 AM
VLSM, CIDR Routing by RIP IT Chan MCSE 2 10-22-2004 04:24 PM



Advertisments