«

Hi,

I'm having difficulty setting up a Cisco Soho 91 with a cable modem.
Can someone tell me if this config looks wrong to them. All i want to
do it is get an IP from the cable ISP and set NAT for internal ips.
Pinging internet ips doesn't work, and when i do a show ip interface
brief i dont get any IP for my Ethernet1 interface.

running-config:

Current configuration : 706 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
!
ip subnet-zero
ip name-server [dns ip]
ip name-server [dns ip]
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
hold-queue 100 out
!
interface Ethernet1
ip address dhcp
ip nat outside
hold-queue 100 out
!
ip nat inside source list 102 interface Ethernet1 overload
ip classless
ip http server
!
!
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
!
line con 0
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
exec-timeout 120 0
login
length 0
!
scheduler max-task-time 5000
end

Thanks,
Felix