Go Back   Velocity Reviews > General Computer Discussion > Hardware
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread
Old 04-05-2007, 08:19 PM   #1
Default Cisco PIX 501 not allowing access to internet


I have the following configuration on my PIX 501:

Building configuration...
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name srsawmills.ca
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outbound permit tcp any any eq www
access-list outbound permit tcp any any eq ftp
access-list outbound permit tcp any any eq domain
access-list outbound permit tcp any any eq https
access-list outbound permit udp any any eq domain
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 142.179.93.149 255.255.0.0
ip address inside 172.20.72.1 255.255.248.0
ip audit info action alarm
ip audit attack action alarm
pdm location 172.20.72.10 255.255.255.255 inside
pdm location 172.20.72.0 255.255.255.0 inside
pdm location 192.168.1.0 255.255.255.0 inside
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 142.179.93.149 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 172.20.72.1 255.255.255.255 inside
http 172.20.72.10 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 172.20.72.10-172.20.72.10 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:c008dbf73b9f073effc41237c3330615
: end
[OK]


I am not able to connect to the internet with any internal network device. The IPs are being handed out by a dhcp server inside the network and not the PIX' DHCP server. Any ideas?


glenn22
glenn22 is offline   Reply With Quote
Old 07-02-2007, 08:31 AM   #2
ithelp
Junior Member
 
Join Date: Jul 2007
Posts: 4
Default
Dear,

In your routing config, the gateway is defined as the firewall IP itself. Put the IP address of router in place of '142.179.93.149', you'll be able to connect to internet.

route outside 0.0.0.0 0.0.0.0 142.179.93.149 1


ithelp
ithelp is offline   Reply With Quote
Old 07-18-2007, 12:25 AM   #3
oretech
Junior Member
 
Join Date: Jul 2007
Location: oregon
Posts: 5
Default
i'm taking over a pix 501 that i've been told doesn't have web traffic and email enabled. it's been working for vpn connection and remote access but not every day internet usage. i need it to be able to allow web traffic and email as well as the vpn/remote access. i used password recovery to access the configuration and here's the running config:

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd gBjs7N0lKmWs8qJD encrypted
hostname pixfirewall
domain-name ciscopix.com
clock timezone PST -8
clock summer-time PDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 172.xxx.xxx.252 siteXXXX
name 172.xxx.xxx.59 dedicatedworkstation
object-group service RDesktop tcp-udp
port-object range 3389 3389
access-list outside_access_in permit tcp any host 68.xxx.xxx.250 eq 3389
access-list inside_outbond_nat0_acl permit ip any host dedicatedworkstation
access-list inbound permit tcp any host 68.xxx.xxx.250 object-group RDesktop
access-list inside_access_in permit ip any any
access-list inside_outbound_nat0_acl permit ip any 172.xxx.xxx.224 255.255.255.240

pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 68.xxx.xxx.250 255.255.255.252
ip address inside 172.xxx.xxx.251 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool smallpool 172.xxx.xxx.230-172.xxx.xxx.235
pdm location site96srv 255.255.255.255 inside
pdm location 172.xxx.xxx.252 255.255.255.255 inside
pdm location 198.xxx.xxx.0 255.255.255.0 outside
pdm location 172.xxx.xxx.224 255.255.255.240 outside
pdm location 65.xxx.xxx.216 255.255.255.255 outside
pdm location dedicatedworkstation 255.255.255.255 inside
pdm location 65.xxx.xxx.175 255.255.255.255 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 dns 0 0
static (inside,outside) tcp 68.xxx.xxx.250 3389 dedicatedworkstation 3389 netmask
255.255.255.255 0 0
access-group inbound in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 68.xxx.xxx.249 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 198.xxx.xxx.0 255.255.255.0 outside
http 65.xxx.xxx.175 255.255.255.255 outside
http 172.xxx.xxx.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
sysopt connection permit-l2tp
crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport
isakmp enable outside
isakmp nat-traversal 20
telnet timeout 5
ssh 198.xxx.xxx.0 255.255.255.0 outside
ssh 172.xxx.xxx.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local smallpool
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username sitexxxx password *********
vpdn enable outside
dhcpd address sitexxxx-172.xxx.xxx.254 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
username admin password rI/q74VpsXRiswkc encrypted privilege 15
terminal width 80
Cryptochecksum:e4ce041c3c9f7517a1bbe13af3d5e07b
: end


any help would be greatly appreciated


oretech

Last edited by oretech : 07-18-2007 at 12:33 AM.
oretech is offline   Reply With Quote
Old 07-18-2007, 12:32 AM   #4
oretech
Junior Member
 
Join Date: Jul 2007
Location: oregon
Posts: 5
Default
is this what i'd need to add:

access-list outbound permit tcp any any eq www
access-list outbound permit tcp any any eq ftp
access-list outbound permit tcp any any eq domain
access-list outbound permit tcp any any eq https
access-list outbound permit udp any any eq domain


oretech
oretech is offline   Reply With Quote
Old 07-19-2007, 07:37 PM   #5
oretech
Junior Member
 
Join Date: Jul 2007
Location: oregon
Posts: 5
Default
i just got hold of the guy that tried to get this up and running before it was handed over to me. he said that when the site96srv (172.xxx.xxx.252) went through the pix it was able to access the internet, but when the client workstations had their gateway configured to 172.xxx.xxx.251 (the router's ip) they weren't able to reach the internet or email.
the site96srv is the VPN host and is named in the following part of the configuration:

names
name 172.xxx.xxx.252 site96srv
name 172.xxx.xxx.59 dedicatedworkstation
object-group service RDesktop tcp-udp
port-object range 3389 3389

what do i need to add to allow the other workstations the same access as the site96srv?

help please


oretech
oretech is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco 1841 router - can't source ping inside to internet yg1985 Hardware 0 01-27-2009 08:18 AM
Cisco 831 Comcast Internet Cable Modem chesco9 Hardware 0 10-03-2008 09:38 AM
My Computer Can't Access Internet BrianKid General Help Related Topics 7 11-25-2006 12:17 AM
Cisco 2811 VPN Access manu Hardware 0 09-11-2006 11:58 AM
setup wireless internet access Richard A+ Certification 2 04-03-2006 08:51 AM




SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46