Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Windows 64bit > kb928843 install failure - The update.ver file is not correct

Reply
Thread Tools

kb928843 install failure - The update.ver file is not correct

 
 
=?Utf-8?B?QXJ0aHVyIE0u?=
Guest
Posts: n/a
 
      02-16-2007
Does anyone have any idea how to fix this?

The installation of hotfix 928843 fails with permission denied error message
in the event log and the following in KB928843.log:


2.703: 2007/02/15 20:47:56.890 (local)
2.703: c:\ca03c3c4ff2d4881eff7a8\update\update.exe (version 6.2.29.0)
2.703: Hotfix started with following command line:
3.984: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
error 0x2
3.984: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with
error 0x2
3.984: DoInstallation: CleanPFR failed: 0x2
4.016: SetProductTypes: InfProductBuildType=BuildType.IP
4.016: SetAltOsLoaderPath: No section uses DirId 65701; done.
4.078: DoInstallation: FetchSourceURL for
c:\ca03c3c4ff2d4881eff7a8\update\update_SP1GDR.inf failed
4.078: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
0xe0000102
4.109: BuildCabinetManifest: update.url absent
4.125: Starting AnalyzeComponents
4.125: AnalyzePhaseZero used 0 ticks
4.125: OEM file scan used 0 ticks
4.266: AnalyzePhaseOne: used 141 ticks
4.266: AnalyzeComponents: Hotpatch analysis disabled; skipping.
4.266: AnalyzeComponents: Hotpatching is disabled.
4.266: FindFirstFile c:\winxp\$hf_mig$\*.*
4.313: KB928843 Setup encountered an error: The update.ver file is not
correct.
4.406: KB928843 Setup encountered an error: The update.ver file is not
correct.
4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
file c:\winxp\syswow64\hhctrl.ocx has branch sp1qfe which is greater than
branch for sp1gdr
4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
file c:\winxp\system32\dllcache\whhctrl.ocx has branch sp1qfe which is
greater than branch for sp1gdr
4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
file c:\winxp\system32\hhctrl.ocx has branch sp1qfe which is greater than
branch for sp1gdr
4.500: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
file c:\winxp\system32\dllcache\hhctrl.ocx has branch sp1qfe which is greater
than branch for sp1gdr
4.500: AnalyzeForBranching used 16 ticks.
4.500: AnalyzeComponents: Branch sp1gdr is not applicable to target
workstation
4.500: AnalyzeComponents used 375 ticks
4.688: Inventory complete: ReturnStatus=61675, 610 ticks
5.875: CreateUninstall = 1,Directory = C:\WINXP\$NtUninstallKB928843$
5.875: Num Ticks for invent : 1797
5.891: DoInstallation: Re-running Inventory.
5.891: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
0xe0000102
5.891: BuildCabinetManifest: update.url absent
5.891: Starting AnalyzeComponents
5.891: AnalyzePhaseZero used 0 ticks
5.891: OEM file scan used 0 ticks
5.906: AnalyzePhaseOne: used 15 ticks
5.906: AnalyzeComponents: Hotpatch analysis disabled; skipping.
5.906: AnalyzeComponents: Hotpatching is disabled.
5.906: FindFirstFile c:\winxp\$hf_mig$\*.*
5.906: KB928843 Setup encountered an error: The update.ver file is not
correct.
5.906: KB928843 Setup encountered an error: The update.ver file is not
correct.
5.906: AnalyzeForBranching used 0 ticks.
5.906: AnalyzePhaseTwo used 0 ticks
5.906: AnalyzePhaseThree used 0 ticks
5.906: AnalyzePhaseFive used 0 ticks
5.906: AnalyzePhaseSix used 0 ticks
5.906: AnalyzeComponents used 15 ticks
5.906: Downloading 0 files
5.906: bPatchMode = FALSE
5.906: Inventory complete: ReturnStatus=0, 15 ticks
5.906: Num Ticks for invent : 15
6.172: Allocation size of drive C: is 4096 bytes, free space = 118585090048
bytes
6.172: AnalyzeDiskUsage: Skipping EstimateDiskUsageForUninstall.
6.172: Drive C: free 113091MB req: 5MB w/uninstall: NOT CALCULATED.
6.172: CabinetBuild complete
6.172: Num Ticks for Cabinet build : 266
6.172: DynamicStrings section not defined or empty.
6.172: FileInUse:: Detection disabled.
7.172: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
0xe0000102
7.203: Num Ticks for Backup : 1031
7.516: Num Ticks for creating uninst inf : 313
7.516: Registering Uninstall Program for -> KB928843, KB928843 , 0x0
7.516: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
0xe0000102
7.766: PFE2: Not avoiding Per File Exceptions.
7.797: GetCatVersion: Failed to retrieve version information from
C:\WINXP\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\KB928843.cat
with error 0x57
7.906: Copied file: C:\WINXP\system32\hhctrl.ocx
8.063: Copied file: C:\WINXP\SysWOW64\hhctrl.ocx
8.250: Copied file (delayed): C:\WINXP\SysWOW64\SET5.tmp
8.250: Copied file: C:\WINXP\system32\DllCache\whhctrl.ocx
8.281: Copied file: C:\WINXP\system32\DllCache\hhctrl.ocx
8.391: DoInstallation: Installing assemblies with source root path:
c:\ca03c3c4ff2d4881eff7a8\
8.391: Num Ticks for Copying files : 875
8.438: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
ProductInstall.GlobalRegistryChanges.Install error: 0x5
8.438: INF_REGISTRY Failed
8.438: DoInstallationoRegistryUpdates failed
8.469: Access is denied.
11.000: Message displayed to the user: Access is denied.
11.000: User Input: OK
11.000: KB928843 installation did not complete.

Select 'OK' to undo the changes that have been made.
17.203: Message displayed to the user: KB928843 installation did not complete.

Select 'OK' to undo the changes that have been made.
17.203: User Input: OK
17.203: Starting process:
C:\WINXP\$NtUninstallKB928843$\spuninst\spuninst.e xe /~ -u -z
19.063: Software Update Rollback has completed with return code 0xbc2. This
rollback requires a reboot.
19.063: KB928843 installation did not complete.

Windows XP Version 2003 has been partially updated and may not work properly.
22.016: Message displayed to the user: KB928843 installation did not complete.

Windows XP Version 2003 has been partially updated and may not work properly.
22.016: User Input: OK
22.016: Update.exe extended error code = 0x5
22.016: Update.exe return code was masked to 0x643 for MSI custom action
compliance.
Shutdown Initiated in Self Extractor
 
Reply With Quote
 
 
 
 
=?Utf-8?B?QXJ0aHVyIE0u?=
Guest
Posts: n/a
 
      02-16-2007
Fixed the problem by reinstalling IE and re-running patch process.


"Arthur M." wrote:

> Does anyone have any idea how to fix this?
>
> The installation of hotfix 928843 fails with permission denied error message
> in the event log and the following in KB928843.log:
>
>
> 2.703: 2007/02/15 20:47:56.890 (local)
> 2.703: c:\ca03c3c4ff2d4881eff7a8\update\update.exe (version 6.2.29.0)
> 2.703: Hotfix started with following command line:
> 3.984: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> error 0x2
> 3.984: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with
> error 0x2
> 3.984: DoInstallation: CleanPFR failed: 0x2
> 4.016: SetProductTypes: InfProductBuildType=BuildType.IP
> 4.016: SetAltOsLoaderPath: No section uses DirId 65701; done.
> 4.078: DoInstallation: FetchSourceURL for
> c:\ca03c3c4ff2d4881eff7a8\update\update_SP1GDR.inf failed
> 4.078: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> 0xe0000102
> 4.109: BuildCabinetManifest: update.url absent
> 4.125: Starting AnalyzeComponents
> 4.125: AnalyzePhaseZero used 0 ticks
> 4.125: OEM file scan used 0 ticks
> 4.266: AnalyzePhaseOne: used 141 ticks
> 4.266: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> 4.266: AnalyzeComponents: Hotpatching is disabled.
> 4.266: FindFirstFile c:\winxp\$hf_mig$\*.*
> 4.313: KB928843 Setup encountered an error: The update.ver file is not
> correct.
> 4.406: KB928843 Setup encountered an error: The update.ver file is not
> correct.
> 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> file c:\winxp\syswow64\hhctrl.ocx has branch sp1qfe which is greater than
> branch for sp1gdr
> 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> file c:\winxp\system32\dllcache\whhctrl.ocx has branch sp1qfe which is
> greater than branch for sp1gdr
> 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> file c:\winxp\system32\hhctrl.ocx has branch sp1qfe which is greater than
> branch for sp1gdr
> 4.500: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> file c:\winxp\system32\dllcache\hhctrl.ocx has branch sp1qfe which is greater
> than branch for sp1gdr
> 4.500: AnalyzeForBranching used 16 ticks.
> 4.500: AnalyzeComponents: Branch sp1gdr is not applicable to target
> workstation
> 4.500: AnalyzeComponents used 375 ticks
> 4.688: Inventory complete: ReturnStatus=61675, 610 ticks
> 5.875: CreateUninstall = 1,Directory = C:\WINXP\$NtUninstallKB928843$
> 5.875: Num Ticks for invent : 1797
> 5.891: DoInstallation: Re-running Inventory.
> 5.891: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> 0xe0000102
> 5.891: BuildCabinetManifest: update.url absent
> 5.891: Starting AnalyzeComponents
> 5.891: AnalyzePhaseZero used 0 ticks
> 5.891: OEM file scan used 0 ticks
> 5.906: AnalyzePhaseOne: used 15 ticks
> 5.906: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> 5.906: AnalyzeComponents: Hotpatching is disabled.
> 5.906: FindFirstFile c:\winxp\$hf_mig$\*.*
> 5.906: KB928843 Setup encountered an error: The update.ver file is not
> correct.
> 5.906: KB928843 Setup encountered an error: The update.ver file is not
> correct.
> 5.906: AnalyzeForBranching used 0 ticks.
> 5.906: AnalyzePhaseTwo used 0 ticks
> 5.906: AnalyzePhaseThree used 0 ticks
> 5.906: AnalyzePhaseFive used 0 ticks
> 5.906: AnalyzePhaseSix used 0 ticks
> 5.906: AnalyzeComponents used 15 ticks
> 5.906: Downloading 0 files
> 5.906: bPatchMode = FALSE
> 5.906: Inventory complete: ReturnStatus=0, 15 ticks
> 5.906: Num Ticks for invent : 15
> 6.172: Allocation size of drive C: is 4096 bytes, free space = 118585090048
> bytes
> 6.172: AnalyzeDiskUsage: Skipping EstimateDiskUsageForUninstall.
> 6.172: Drive C: free 113091MB req: 5MB w/uninstall: NOT CALCULATED.
> 6.172: CabinetBuild complete
> 6.172: Num Ticks for Cabinet build : 266
> 6.172: DynamicStrings section not defined or empty.
> 6.172: FileInUse:: Detection disabled.
> 7.172: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> 0xe0000102
> 7.203: Num Ticks for Backup : 1031
> 7.516: Num Ticks for creating uninst inf : 313
> 7.516: Registering Uninstall Program for -> KB928843, KB928843 , 0x0
> 7.516: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> 0xe0000102
> 7.766: PFE2: Not avoiding Per File Exceptions.
> 7.797: GetCatVersion: Failed to retrieve version information from
> C:\WINXP\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\KB928843.cat
> with error 0x57
> 7.906: Copied file: C:\WINXP\system32\hhctrl.ocx
> 8.063: Copied file: C:\WINXP\SysWOW64\hhctrl.ocx
> 8.250: Copied file (delayed): C:\WINXP\SysWOW64\SET5.tmp
> 8.250: Copied file: C:\WINXP\system32\DllCache\whhctrl.ocx
> 8.281: Copied file: C:\WINXP\system32\DllCache\hhctrl.ocx
> 8.391: DoInstallation: Installing assemblies with source root path:
> c:\ca03c3c4ff2d4881eff7a8\
> 8.391: Num Ticks for Copying files : 875
> 8.438: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 8.438: INF_REGISTRY Failed
> 8.438: DoInstallationoRegistryUpdates failed
> 8.469: Access is denied.
> 11.000: Message displayed to the user: Access is denied.
> 11.000: User Input: OK
> 11.000: KB928843 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 17.203: Message displayed to the user: KB928843 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 17.203: User Input: OK
> 17.203: Starting process:
> C:\WINXP\$NtUninstallKB928843$\spuninst\spuninst.e xe /~ -u -z
> 19.063: Software Update Rollback has completed with return code 0xbc2. This
> rollback requires a reboot.
> 19.063: KB928843 installation did not complete.
>
> Windows XP Version 2003 has been partially updated and may not work properly.
> 22.016: Message displayed to the user: KB928843 installation did not complete.
>
> Windows XP Version 2003 has been partially updated and may not work properly.
> 22.016: User Input: OK
> 22.016: Update.exe extended error code = 0x5
> 22.016: Update.exe return code was masked to 0x643 for MSI custom action
> compliance.
> Shutdown Initiated in Self Extractor

 
Reply With Quote
 
 
 
 
=?Utf-8?B?TWF6ZXBwYWJvYg==?=
Guest
Posts: n/a
 
      02-21-2007
I am having the same problem. How do I go about reinstalling IE and
re-running the patch process.

"Arthur M." wrote:

> Fixed the problem by reinstalling IE and re-running patch process.
>
>
> "Arthur M." wrote:
>
> > Does anyone have any idea how to fix this?
> >
> > The installation of hotfix 928843 fails with permission denied error message
> > in the event log and the following in KB928843.log:
> >
> >
> > 2.703: 2007/02/15 20:47:56.890 (local)
> > 2.703: c:\ca03c3c4ff2d4881eff7a8\update\update.exe (version 6.2.29.0)
> > 2.703: Hotfix started with following command line:
> > 3.984: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> > error 0x2
> > 3.984: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with
> > error 0x2
> > 3.984: DoInstallation: CleanPFR failed: 0x2
> > 4.016: SetProductTypes: InfProductBuildType=BuildType.IP
> > 4.016: SetAltOsLoaderPath: No section uses DirId 65701; done.
> > 4.078: DoInstallation: FetchSourceURL for
> > c:\ca03c3c4ff2d4881eff7a8\update\update_SP1GDR.inf failed
> > 4.078: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > 0xe0000102
> > 4.109: BuildCabinetManifest: update.url absent
> > 4.125: Starting AnalyzeComponents
> > 4.125: AnalyzePhaseZero used 0 ticks
> > 4.125: OEM file scan used 0 ticks
> > 4.266: AnalyzePhaseOne: used 141 ticks
> > 4.266: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> > 4.266: AnalyzeComponents: Hotpatching is disabled.
> > 4.266: FindFirstFile c:\winxp\$hf_mig$\*.*
> > 4.313: KB928843 Setup encountered an error: The update.ver file is not
> > correct.
> > 4.406: KB928843 Setup encountered an error: The update.ver file is not
> > correct.
> > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > file c:\winxp\syswow64\hhctrl.ocx has branch sp1qfe which is greater than
> > branch for sp1gdr
> > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > file c:\winxp\system32\dllcache\whhctrl.ocx has branch sp1qfe which is
> > greater than branch for sp1gdr
> > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > file c:\winxp\system32\hhctrl.ocx has branch sp1qfe which is greater than
> > branch for sp1gdr
> > 4.500: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > file c:\winxp\system32\dllcache\hhctrl.ocx has branch sp1qfe which is greater
> > than branch for sp1gdr
> > 4.500: AnalyzeForBranching used 16 ticks.
> > 4.500: AnalyzeComponents: Branch sp1gdr is not applicable to target
> > workstation
> > 4.500: AnalyzeComponents used 375 ticks
> > 4.688: Inventory complete: ReturnStatus=61675, 610 ticks
> > 5.875: CreateUninstall = 1,Directory = C:\WINXP\$NtUninstallKB928843$
> > 5.875: Num Ticks for invent : 1797
> > 5.891: DoInstallation: Re-running Inventory.
> > 5.891: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > 0xe0000102
> > 5.891: BuildCabinetManifest: update.url absent
> > 5.891: Starting AnalyzeComponents
> > 5.891: AnalyzePhaseZero used 0 ticks
> > 5.891: OEM file scan used 0 ticks
> > 5.906: AnalyzePhaseOne: used 15 ticks
> > 5.906: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> > 5.906: AnalyzeComponents: Hotpatching is disabled.
> > 5.906: FindFirstFile c:\winxp\$hf_mig$\*.*
> > 5.906: KB928843 Setup encountered an error: The update.ver file is not
> > correct.
> > 5.906: KB928843 Setup encountered an error: The update.ver file is not
> > correct.
> > 5.906: AnalyzeForBranching used 0 ticks.
> > 5.906: AnalyzePhaseTwo used 0 ticks
> > 5.906: AnalyzePhaseThree used 0 ticks
> > 5.906: AnalyzePhaseFive used 0 ticks
> > 5.906: AnalyzePhaseSix used 0 ticks
> > 5.906: AnalyzeComponents used 15 ticks
> > 5.906: Downloading 0 files
> > 5.906: bPatchMode = FALSE
> > 5.906: Inventory complete: ReturnStatus=0, 15 ticks
> > 5.906: Num Ticks for invent : 15
> > 6.172: Allocation size of drive C: is 4096 bytes, free space = 118585090048
> > bytes
> > 6.172: AnalyzeDiskUsage: Skipping EstimateDiskUsageForUninstall.
> > 6.172: Drive C: free 113091MB req: 5MB w/uninstall: NOT CALCULATED.
> > 6.172: CabinetBuild complete
> > 6.172: Num Ticks for Cabinet build : 266
> > 6.172: DynamicStrings section not defined or empty.
> > 6.172: FileInUse:: Detection disabled.
> > 7.172: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > 0xe0000102
> > 7.203: Num Ticks for Backup : 1031
> > 7.516: Num Ticks for creating uninst inf : 313
> > 7.516: Registering Uninstall Program for -> KB928843, KB928843 , 0x0
> > 7.516: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > 0xe0000102
> > 7.766: PFE2: Not avoiding Per File Exceptions.
> > 7.797: GetCatVersion: Failed to retrieve version information from
> > C:\WINXP\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\KB928843.cat
> > with error 0x57
> > 7.906: Copied file: C:\WINXP\system32\hhctrl.ocx
> > 8.063: Copied file: C:\WINXP\SysWOW64\hhctrl.ocx
> > 8.250: Copied file (delayed): C:\WINXP\SysWOW64\SET5.tmp
> > 8.250: Copied file: C:\WINXP\system32\DllCache\whhctrl.ocx
> > 8.281: Copied file: C:\WINXP\system32\DllCache\hhctrl.ocx
> > 8.391: DoInstallation: Installing assemblies with source root path:
> > c:\ca03c3c4ff2d4881eff7a8\
> > 8.391: Num Ticks for Copying files : 875
> > 8.438: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> > ProductInstall.GlobalRegistryChanges.Install error: 0x5
> > 8.438: INF_REGISTRY Failed
> > 8.438: DoInstallationoRegistryUpdates failed
> > 8.469: Access is denied.
> > 11.000: Message displayed to the user: Access is denied.
> > 11.000: User Input: OK
> > 11.000: KB928843 installation did not complete.
> >
> > Select 'OK' to undo the changes that have been made.
> > 17.203: Message displayed to the user: KB928843 installation did not complete.
> >
> > Select 'OK' to undo the changes that have been made.
> > 17.203: User Input: OK
> > 17.203: Starting process:
> > C:\WINXP\$NtUninstallKB928843$\spuninst\spuninst.e xe /~ -u -z
> > 19.063: Software Update Rollback has completed with return code 0xbc2. This
> > rollback requires a reboot.
> > 19.063: KB928843 installation did not complete.
> >
> > Windows XP Version 2003 has been partially updated and may not work properly.
> > 22.016: Message displayed to the user: KB928843 installation did not complete.
> >
> > Windows XP Version 2003 has been partially updated and may not work properly.
> > 22.016: User Input: OK
> > 22.016: Update.exe extended error code = 0x5
> > 22.016: Update.exe return code was masked to 0x643 for MSI custom action
> > compliance.
> > Shutdown Initiated in Self Extractor

 
Reply With Quote
 
=?Utf-8?B?QXJ0aHVyIE0u?=
Guest
Posts: n/a
 
      02-21-2007
download internet explorer 7 from microsoft. install it. I'm taking a guess
that during installation it will tell you that it cant uninstall the previous
version - just ignore it and move on.
Once installed, it will ask you to restart - do that
once it is up - install the patches. installation of windows desktop search
also worked after this (which is something I have had problems).


"Mazeppabob" wrote:

> I am having the same problem. How do I go about reinstalling IE and
> re-running the patch process.
>
> "Arthur M." wrote:
>
> > Fixed the problem by reinstalling IE and re-running patch process.
> >
> >
> > "Arthur M." wrote:
> >
> > > Does anyone have any idea how to fix this?
> > >
> > > The installation of hotfix 928843 fails with permission denied error message
> > > in the event log and the following in KB928843.log:
> > >
> > >
> > > 2.703: 2007/02/15 20:47:56.890 (local)
> > > 2.703: c:\ca03c3c4ff2d4881eff7a8\update\update.exe (version 6.2.29.0)
> > > 2.703: Hotfix started with following command line:
> > > 3.984: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> > > error 0x2
> > > 3.984: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed with
> > > error 0x2
> > > 3.984: DoInstallation: CleanPFR failed: 0x2
> > > 4.016: SetProductTypes: InfProductBuildType=BuildType.IP
> > > 4.016: SetAltOsLoaderPath: No section uses DirId 65701; done.
> > > 4.078: DoInstallation: FetchSourceURL for
> > > c:\ca03c3c4ff2d4881eff7a8\update\update_SP1GDR.inf failed
> > > 4.078: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > > 0xe0000102
> > > 4.109: BuildCabinetManifest: update.url absent
> > > 4.125: Starting AnalyzeComponents
> > > 4.125: AnalyzePhaseZero used 0 ticks
> > > 4.125: OEM file scan used 0 ticks
> > > 4.266: AnalyzePhaseOne: used 141 ticks
> > > 4.266: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> > > 4.266: AnalyzeComponents: Hotpatching is disabled.
> > > 4.266: FindFirstFile c:\winxp\$hf_mig$\*.*
> > > 4.313: KB928843 Setup encountered an error: The update.ver file is not
> > > correct.
> > > 4.406: KB928843 Setup encountered an error: The update.ver file is not
> > > correct.
> > > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > > file c:\winxp\syswow64\hhctrl.ocx has branch sp1qfe which is greater than
> > > branch for sp1gdr
> > > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > > file c:\winxp\system32\dllcache\whhctrl.ocx has branch sp1qfe which is
> > > greater than branch for sp1gdr
> > > 4.484: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > > file c:\winxp\system32\hhctrl.ocx has branch sp1qfe which is greater than
> > > branch for sp1gdr
> > > 4.500: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target
> > > file c:\winxp\system32\dllcache\hhctrl.ocx has branch sp1qfe which is greater
> > > than branch for sp1gdr
> > > 4.500: AnalyzeForBranching used 16 ticks.
> > > 4.500: AnalyzeComponents: Branch sp1gdr is not applicable to target
> > > workstation
> > > 4.500: AnalyzeComponents used 375 ticks
> > > 4.688: Inventory complete: ReturnStatus=61675, 610 ticks
> > > 5.875: CreateUninstall = 1,Directory = C:\WINXP\$NtUninstallKB928843$
> > > 5.875: Num Ticks for invent : 1797
> > > 5.891: DoInstallation: Re-running Inventory.
> > > 5.891: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > > 0xe0000102
> > > 5.891: BuildCabinetManifest: update.url absent
> > > 5.891: Starting AnalyzeComponents
> > > 5.891: AnalyzePhaseZero used 0 ticks
> > > 5.891: OEM file scan used 0 ticks
> > > 5.906: AnalyzePhaseOne: used 15 ticks
> > > 5.906: AnalyzeComponents: Hotpatch analysis disabled; skipping.
> > > 5.906: AnalyzeComponents: Hotpatching is disabled.
> > > 5.906: FindFirstFile c:\winxp\$hf_mig$\*.*
> > > 5.906: KB928843 Setup encountered an error: The update.ver file is not
> > > correct.
> > > 5.906: KB928843 Setup encountered an error: The update.ver file is not
> > > correct.
> > > 5.906: AnalyzeForBranching used 0 ticks.
> > > 5.906: AnalyzePhaseTwo used 0 ticks
> > > 5.906: AnalyzePhaseThree used 0 ticks
> > > 5.906: AnalyzePhaseFive used 0 ticks
> > > 5.906: AnalyzePhaseSix used 0 ticks
> > > 5.906: AnalyzeComponents used 15 ticks
> > > 5.906: Downloading 0 files
> > > 5.906: bPatchMode = FALSE
> > > 5.906: Inventory complete: ReturnStatus=0, 15 ticks
> > > 5.906: Num Ticks for invent : 15
> > > 6.172: Allocation size of drive C: is 4096 bytes, free space = 118585090048
> > > bytes
> > > 6.172: AnalyzeDiskUsage: Skipping EstimateDiskUsageForUninstall.
> > > 6.172: Drive C: free 113091MB req: 5MB w/uninstall: NOT CALCULATED.
> > > 6.172: CabinetBuild complete
> > > 6.172: Num Ticks for Cabinet build : 266
> > > 6.172: DynamicStrings section not defined or empty.
> > > 6.172: FileInUse:: Detection disabled.
> > > 7.172: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > > 0xe0000102
> > > 7.203: Num Ticks for Backup : 1031
> > > 7.516: Num Ticks for creating uninst inf : 313
> > > 7.516: Registering Uninstall Program for -> KB928843, KB928843 , 0x0
> > > 7.516: LoadFileQueues: UpdSpGetSourceFileLocation for hal.dll failed:
> > > 0xe0000102
> > > 7.766: PFE2: Not avoiding Per File Exceptions.
> > > 7.797: GetCatVersion: Failed to retrieve version information from
> > > C:\WINXP\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\KB928843.cat
> > > with error 0x57
> > > 7.906: Copied file: C:\WINXP\system32\hhctrl.ocx
> > > 8.063: Copied file: C:\WINXP\SysWOW64\hhctrl.ocx
> > > 8.250: Copied file (delayed): C:\WINXP\SysWOW64\SET5.tmp
> > > 8.250: Copied file: C:\WINXP\system32\DllCache\whhctrl.ocx
> > > 8.281: Copied file: C:\WINXP\system32\DllCache\hhctrl.ocx
> > > 8.391: DoInstallation: Installing assemblies with source root path:
> > > c:\ca03c3c4ff2d4881eff7a8\
> > > 8.391: Num Ticks for Copying files : 875
> > > 8.438: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> > > ProductInstall.GlobalRegistryChanges.Install error: 0x5
> > > 8.438: INF_REGISTRY Failed
> > > 8.438: DoInstallationoRegistryUpdates failed
> > > 8.469: Access is denied.
> > > 11.000: Message displayed to the user: Access is denied.
> > > 11.000: User Input: OK
> > > 11.000: KB928843 installation did not complete.
> > >
> > > Select 'OK' to undo the changes that have been made.
> > > 17.203: Message displayed to the user: KB928843 installation did not complete.
> > >
> > > Select 'OK' to undo the changes that have been made.
> > > 17.203: User Input: OK
> > > 17.203: Starting process:
> > > C:\WINXP\$NtUninstallKB928843$\spuninst\spuninst.e xe /~ -u -z
> > > 19.063: Software Update Rollback has completed with return code 0xbc2. This
> > > rollback requires a reboot.
> > > 19.063: KB928843 installation did not complete.
> > >
> > > Windows XP Version 2003 has been partially updated and may not work properly.
> > > 22.016: Message displayed to the user: KB928843 installation did not complete.
> > >
> > > Windows XP Version 2003 has been partially updated and may not work properly.
> > > 22.016: User Input: OK
> > > 22.016: Update.exe extended error code = 0x5
> > > 22.016: Update.exe return code was masked to 0x643 for MSI custom action
> > > compliance.
> > > Shutdown Initiated in Self Extractor

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
simulation result is correct but synthesis result is not correct J.Ram VHDL 7 12-03-2008 01:26 PM
Uploaded File Empty but in correct folder with correct name froil Perl Misc 12 03-02-2006 01:21 PM
Correct White Balance Doesn't Mean Correct Color?? jim evans Digital Photography 28 12-27-2005 05:10 AM
correct or not correct? Dan HTML 7 10-02-2003 10:16 PM
To correct my program. please, check to find errors and correct me. joon Java 1 07-08-2003 06:13 AM



Advertisments