Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > VHDL > altera Flex10k + I2C

Reply
Thread Tools

altera Flex10k + I2C

 
 
Marc
Guest
Posts: n/a
 
      03-16-2007

hi,
I implemented an I2C-bus part in my Flex10k where the SDA line is bidir and
the SCL is input (slave mode). Clock input is 24MHz (not SCL).
What I see on the SDA pin of the device is that the signal there is
oscillating with frequence of 1.3Hz.
It doesn't matter when this line is floating or connected to a I2C
transmitter in master mode by use of a pull-up resistor.
The transmitter is OK I checked.

Any help?

Marc


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
equivalent Xilinx FPGA for Altera Stratix II GX-60 ,Altera StratixII GX-90 chaitu VHDL 1 01-28-2008 12:46 PM
Does anyone have the I2C vhdl code and work for Altera Flex10K FPGA? underground VHDL 5 07-22-2004 10:45 PM
VHDL code of PLL and LVDS-receiver for FLEX10K Altera PLD spiderman_astig VHDL 3 02-06-2004 05:03 AM
Re: regarding I2C protocols rickman VHDL 5 06-24-2003 10:09 PM
Re: regarding I2C protocols carel harmsen VHDL 0 06-23-2003 09:43 PM



Advertisments