Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > WS-X6516A-GBIC + Catalyst 6500 + Sup2 = Fibre Channel-Switching ?

Reply
Thread Tools

WS-X6516A-GBIC + Catalyst 6500 + Sup2 = Fibre Channel-Switching ?

 
 
Mike D. Njoroge
Guest
Posts: n/a
 
      03-08-2007
Hi folks,

is it possible to use the combo mentioned above as a fibre channel-switch?

It seems that the WS-X6515A-GBIC and the CWDM-GBIC-XXXX GBICs should support
802.3z which is based on the (layer 1/2) fibre channel-protocol, but that
does not neccessarily mean that I can also use this switching module as a
pure fibre channel-switch.

Cisco talk about FC explicitely only in their description of the
CWDM-SFP-XXX SFP-modules.

Am I completely off track here?
What do you think?

Any help and/or hints are highly appreciated.

Thanks in advance and best regards,

Mike D. Njoroge


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
which MSFC install CEF entries under hybrid 6500(SUP2/MSFC2) Tao Liu Cisco 2 07-15-2007 09:58 AM
Cisco 6500 + Sup1a or Sup2? Nicolaj Kamensek Cisco 4 01-03-2007 03:40 PM
SFP Fibre cable between 2 x 6500's Gary Cisco 4 11-26-2005 12:39 AM
GLBP group restriction when using a sup2 and 6500 switch Tristan Cisco 0 03-08-2005 04:12 PM
Need Help With VLAN config on 6500 w/Sup2 Blade BitBucket Cisco 0 11-16-2003 06:12 PM



Advertisments