Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Wireless Networking > Wireless issues and SP2

Reply
Thread Tools

Wireless issues and SP2

 
 
=?Utf-8?B?SmdzdGVtcGU=?=
Guest
Posts: n/a
 
      10-22-2004
Hi,
I recently downloaded SP 2 for my IBM laptop. I have since had major
issues connecting to wireless services. I have wireless at home and at
school and my computer recognizes the signals and says there is a "very good
/ excellent" signal, however when I connect I just get a blank screen. Any
ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
multiple times, I"ve tried turning the firewall on and off and frankly I'm
not sure what else to do. Any help would be greatly appreciated. Thanks.
Justin
 
Reply With Quote
 
 
 
 
=?Utf-8?B?QnVnc0FyZUluZXZpdGFibGVJbk1pY3Jvc29mdFByb2R1Y3Rz?=
Guest
Posts: n/a
 
      10-23-2004
Hi,

I spent considerable time on researching on the post service pack 2
installation problems. I had a similar problem. Post service pack 2
installation on windows XP(home edition) I use to get signal strength is
maximum (very good), but used to get Limited or no network connectivity. I
researched on Google and come up with the following article, that explains
about a bug in Service Pack 2.

Please check the following article. It helped me to solve the problem. I am
glad to share it with others who will not waste time in microsoft product
bugs.

http://users.tpg.com.au/adsl5muj/index.htm

I am very thankful to this website for having solved my problem. I am sure
it will solve your problem too.

Regards
Deepak Papanna

"Jgstempe" wrote:

> Hi,
> I recently downloaded SP 2 for my IBM laptop. I have since had major
> issues connecting to wireless services. I have wireless at home and at
> school and my computer recognizes the signals and says there is a "very good
> / excellent" signal, however when I connect I just get a blank screen. Any
> ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> multiple times, I"ve tried turning the firewall on and off and frankly I'm
> not sure what else to do. Any help would be greatly appreciated. Thanks.
> Justin

 
Reply With Quote
 
 
 
 
Pavel A.
Guest
Posts: n/a
 
      10-23-2004
Not too many details to help you... what is this blank screen - Internet explorer?
Do you see the "limited connectivity" message?
If you know IP address of your AP/router, can you ping it?

Regards,
--PA

"Jgstempe" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> Hi,
> I recently downloaded SP 2 for my IBM laptop. I have since had major
> issues connecting to wireless services. I have wireless at home and at
> school and my computer recognizes the signals and says there is a "very good
> / excellent" signal, however when I connect I just get a blank screen. Any
> ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> multiple times, I"ve tried turning the firewall on and off and frankly I'm
> not sure what else to do. Any help would be greatly appreciated. Thanks.
> Justin



 
Reply With Quote
 
Pavel A.
Guest
Posts: n/a
 
      10-23-2004
Ok I've just read this page and haven't see too much of "bug on SP2" there.
The first part of this article repeats well known advices how to fix
common networking issues with XP in general and SP2 (the new firewall etc).

Next, there is a reference to one bug: KB884020 that can affect some software
that install as a local proxy - but actually, IMHO, can break trojans and
spyware that often do so too.
Next one is the VPN ove NAT issue that isn't likely to affect home users -
most probably not relevant for the OP.

So, can you remember which advice on that link helped you?
If it was from the first part - it can't be qualified as "SP2 bug".

Regards,
--PA

"BugsAreInevitableInMicrosoftProducts" <BugsAreInevitableInMicrosoftProducts@discussions. microsoft.com> wrote in message
news:(E-Mail Removed)...
> Hi,
>
> I spent considerable time on researching on the post service pack 2
> installation problems. I had a similar problem. Post service pack 2
> installation on windows XP(home edition) I use to get signal strength is
> maximum (very good), but used to get Limited or no network connectivity. I
> researched on Google and come up with the following article, that explains
> about a bug in Service Pack 2.
>
> Please check the following article. It helped me to solve the problem. I am
> glad to share it with others who will not waste time in microsoft product
> bugs.
>
> http://users.tpg.com.au/adsl5muj/index.htm
>
> I am very thankful to this website for having solved my problem. I am sure
> it will solve your problem too.
>
> Regards
> Deepak Papanna
>
> "Jgstempe" wrote:
>
> > Hi,
> > I recently downloaded SP 2 for my IBM laptop. I have since had major
> > issues connecting to wireless services. I have wireless at home and at
> > school and my computer recognizes the signals and says there is a "very good
> > / excellent" signal, however when I connect I just get a blank screen. Any
> > ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> > multiple times, I"ve tried turning the firewall on and off and frankly I'm
> > not sure what else to do. Any help would be greatly appreciated. Thanks.
> > Justin





 
Reply With Quote
 
TW
Guest
Posts: n/a
 
      10-24-2004
I read your web site and found the following problems with it.
1- The site talks about bugs but never REALLY mentions a bug at all.

2- Cabling, TP and UTP. TP or twisted pair- I think the site confuses this
with a cross over cable because UTP is unshielded twisted pair. The standard
for cat5 cables uses several twisted pairs. The twisting within the cable
reduces crosstalk between the other twisted pairs within the cable.

3- The site says Zonealarm(free) is the "most common problematic firewall
program". This statement is simply misinformation and not even close to the
truth. I have found Zonealarm to be the best firewall product to use, not
just blocking incoming packets but also OUTGOING packets such as spyware and
trojans. You just have to know how to add your subnet or range of IPs to the
trusted zone. Apparently the writer of the site doesn't know how to
configure a firewall.

I haven't found ANY bugs with SP2 yet, but again you have to configure a few
things. These are not bug issues but configuration issues.
First, turn OFF the windows firewall(ON by default after applying SP2).
Second, UNCHECK the enable IEEE 802.1x authentication box(CHECKED by default
after applying SP2).
Third, update you drivers and or firmware for your wireless card. Best to
download the latest drivers BEFORE applying SP2, then if the card doesn't
work AFTER SP2 you can simply reinstall the drivers.


"BugsAreInevitableInMicrosoftProducts"
<BugsAreInevitableInMicrosoftProducts@discussions. microsoft.com> wrote in
message news:(E-Mail Removed)...
> Hi,
>
> I spent considerable time on researching on the post service pack 2
> installation problems. I had a similar problem. Post service pack 2
> installation on windows XP(home edition) I use to get signal strength is
> maximum (very good), but used to get Limited or no network connectivity.
> I
> researched on Google and come up with the following article, that explains
> about a bug in Service Pack 2.
>
> Please check the following article. It helped me to solve the problem. I
> am
> glad to share it with others who will not waste time in microsoft product
> bugs.
>
> http://users.tpg.com.au/adsl5muj/index.htm
>
> I am very thankful to this website for having solved my problem. I am
> sure
> it will solve your problem too.
>
> Regards
> Deepak Papanna
>
> "Jgstempe" wrote:
>
>> Hi,
>> I recently downloaded SP 2 for my IBM laptop. I have since had major
>> issues connecting to wireless services. I have wireless at home and at
>> school and my computer recognizes the signals and says there is a "very
>> good
>> / excellent" signal, however when I connect I just get a blank screen.
>> Any
>> ideas on how to troubleshoot this? I've disabled and re-enabled the
>> wireless
>> multiple times, I"ve tried turning the firewall on and off and frankly
>> I'm
>> not sure what else to do. Any help would be greatly appreciated.
>> Thanks.
>> Justin



 
Reply With Quote
 
Simon Pleasants
Guest
Posts: n/a
 
      10-25-2004
On Fri, 22 Oct 2004 14:55:04 -0700, "Jgstempe"
<(E-Mail Removed)> wrote:

>Hi,
> I recently downloaded SP 2 for my IBM laptop. I have since had major
>issues connecting to wireless services. I have wireless at home and at
>school and my computer recognizes the signals and says there is a "very good
>/ excellent" signal, however when I connect I just get a blank screen. Any
>ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
>multiple times, I"ve tried turning the firewall on and off and frankly I'm
>not sure what else to do. Any help would be greatly appreciated. Thanks.
>Justin


Not a lot to work with there....

Is your router set up to assign IP addresses using DCHP? If so, what
IP address is assigned to your connection.... is it one from the range
that should be allocated by your DCHP? Or is a completely barmy one
which has nothing to do with anything.

If the latter, which it seems like to me, then it sounds like a
security issue. Are you using encryption? If so, what type? Try
turning off encryption (only temporarily) and do you now get a "live"
connection? If so then you are probably not authenticating properly.

Generally speaking wireless networks will allow you to "connect" even
if you fail to authenticate properly. However you will quickly find
the connection is totally useless but Windows does (misleadingly)
report you are connected.
 
Reply With Quote
 
Annette
Guest
Posts: n/a
 
      10-25-2004
I'm so glad I found this message, I too have this problem! I have just
updated my laptop with SP2. I went through and removed all the
firewall settings, etc., since I have my own firewall. Now I find that
I can access the Internet just fine through the LAN at work, but for
some reason cannot access any web pages using the wireless connection
at home or at work. It connects to both wireless connections, and
shows the connections on the task bar, but when I try to access a web
page I get nothing! (Page not found). I set up my other laptop that I
have not updated yet and tried to compare the services and I don't
really see anything strange. Everything ran fine until I updated to
SP2.

Simon Pleasants <(E-Mail Removed)> wrote in message news:<(E-Mail Removed)>. ..
> On Fri, 22 Oct 2004 14:55:04 -0700, "Jgstempe"
> <(E-Mail Removed)> wrote:
>
> >Hi,
> > I recently downloaded SP 2 for my IBM laptop. I have since had major
> >issues connecting to wireless services. I have wireless at home and at
> >school and my computer recognizes the signals and says there is a "very good
> >/ excellent" signal, however when I connect I just get a blank screen. Any
> >ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> >multiple times, I"ve tried turning the firewall on and off and frankly I'm
> >not sure what else to do. Any help would be greatly appreciated. Thanks.
> >Justin

>
> Not a lot to work with there....
>
> Is your router set up to assign IP addresses using DCHP? If so, what
> IP address is assigned to your connection.... is it one from the range
> that should be allocated by your DCHP? Or is a completely barmy one
> which has nothing to do with anything.
>
> If the latter, which it seems like to me, then it sounds like a
> security issue. Are you using encryption? If so, what type? Try
> turning off encryption (only temporarily) and do you now get a "live"
> connection? If so then you are probably not authenticating properly.
>
> Generally speaking wireless networks will allow you to "connect" even
> if you fail to authenticate properly. However you will quickly find
> the connection is totally useless but Windows does (misleadingly)
> report you are connected.

 
Reply With Quote
 
=?Utf-8?B?dGVycnk=?=
Guest
Posts: n/a
 
      10-25-2004
Hi,
I think what you should try is to make sure you dont have another third
party firewall enabled like norton internet security or another firewwall
like sygate personal firewall or zonealarm

Also try to uninstall and reinstall your wireless card - via your install
disk - another thing you should try is netsh winsock reset and netsh int ip
reset

check for functionality after you do this..

Also another ide aoyu can try is to open windows explorer and try to type in
a web page to see if it is just an issue with ie.

Hope this info helps.

Good luck

"Jgstempe" wrote:

> Hi,
> I recently downloaded SP 2 for my IBM laptop. I have since had major
> issues connecting to wireless services. I have wireless at home and at
> school and my computer recognizes the signals and says there is a "very good
> / excellent" signal, however when I connect I just get a blank screen. Any
> ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> multiple times, I"ve tried turning the firewall on and off and frankly I'm
> not sure what else to do. Any help would be greatly appreciated. Thanks.
> Justin

 
Reply With Quote
 
Simon Pleasants
Guest
Posts: n/a
 
      10-26-2004
On 25 Oct 2004 15:22:44 -0700, http://www.velocityreviews.com/forums/(E-Mail Removed) (Annette) wrote:

>I'm so glad I found this message, I too have this problem! I have just
>updated my laptop with SP2. I went through and removed all the
>firewall settings, etc., since I have my own firewall. Now I find that
>I can access the Internet just fine through the LAN at work, but for
>some reason cannot access any web pages using the wireless connection
>at home or at work. It connects to both wireless connections, and
>shows the connections on the task bar, but when I try to access a web
>page I get nothing! (Page not found). I set up my other laptop that I
>have not updated yet and tried to compare the services and I don't
>really see anything strange. Everything ran fine until I updated to
>SP2.


Have you tried any of the things I suggested? If so, what were the
results?
 
Reply With Quote
 
Annette
Guest
Posts: n/a
 
      10-27-2004
"terry" <(E-Mail Removed)> wrote in message news:<(E-Mail Removed)>...
> Hi,
> I think what you should try is to make sure you dont have another third
> party firewall enabled like norton internet security or another firewwall
> like sygate personal firewall or zonealarm
>
> Also try to uninstall and reinstall your wireless card - via your install
> disk - another thing you should try is netsh winsock reset and netsh int ip
> reset
>
> check for functionality after you do this..
>
> Also another ide aoyu can try is to open windows explorer and try to type in
> a web page to see if it is just an issue with ie.
>
> Hope this info helps.
>
> Good luck
>
> "Jgstempe" wrote:
>
> > Hi,
> > I recently downloaded SP 2 for my IBM laptop. I have since had major
> > issues connecting to wireless services. I have wireless at home and at
> > school and my computer recognizes the signals and says there is a "very good
> > / excellent" signal, however when I connect I just get a blank screen. Any
> > ideas on how to troubleshoot this? I've disabled and re-enabled the wireless
> > multiple times, I"ve tried turning the firewall on and off and frankly I'm
> > not sure what else to do. Any help would be greatly appreciated. Thanks.
> > Justin


I just had the exact same problem with my IBM Thinkpad (see previous
post). I just got mine working by downloading the latest version of
IBM Access Connections and the latest driver for the internal wireless
adapter. It works great now. Check their website and see if it works
for you.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows XP Pro clean install issues, SP2 issues too... Howie Computer Support 9 07-12-2005 04:47 PM
Windows XP Pro clean install issues, SP2 issues too... Howie Computer Support 0 07-06-2005 07:12 PM
Windows XP Pro clean install issues, SP2 issues too... Howie Computer Information 2 07-06-2005 04:58 PM
Re: Windows XP Pro clean install issues, SP2 issues too... pcbutts1 Computer Support 0 07-06-2005 04:58 PM
Re: Windows XP Pro clean install issues, SP2 issues too... pcbutts1 Computer Support 0 07-06-2005 04:52 PM



Advertisments