Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > How to determine IOS feature set version?

Reply
Thread Tools

How to determine IOS feature set version?

 
 
Mike W.
Guest
Posts: n/a
 
      02-08-2007
Good afternoon all,

I am trying to upgrade my 3640 router to a later IOS version due to the
recent vulnerabilities, but I am not sure which version to use.
Not the overall IOS version, but the software feature set version.

I'm currently on 12.2(32) but nowhere in the Show ver output do I see
anything about Enterprise, IP, etc.

Below is the output...am I missing something? Thanks!




cisco#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(32), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 02-Dec-05 15:19 by
Image text-base: 0x60008930, data-base: 0x6145E000

ROM: System Bootstrap, Version 11.1(17)AA, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc2)

cisco uptime is 35 weeks, 8 hours, 31 minutes
System returned to ROM by power-on
System restarted at 02:11:28 EST Tue Jun 6 2006
System image file is "slot0:c3640-js-mz.122-32.bin"

cisco 3640 (R4700) processor (revision 0x00) with 125952K/5120K bytes of
memory.
Processor board ID 07991303
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
4 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)
20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x4102

 
Reply With Quote
 
 
 
 
Christophe Fillot
Guest
Posts: n/a
 
      02-08-2007
Mike W. wrote:
> Good afternoon all,
>
> I am trying to upgrade my 3640 router to a later IOS version due to the
> recent vulnerabilities, but I am not sure which version to use.
> Not the overall IOS version, but the software feature set version.
>
> I'm currently on 12.2(32) but nowhere in the Show ver output do I see
> anything about Enterprise, IP, etc.


In brief:

I = IP
IS = IP Plus
JS = Enterprise
SP = Service Provider

 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      02-08-2007
In article <J2Jyh.148069$(E-Mail Removed)>,
Mike W. <(E-Mail Removed)> wrote:

>I am trying to upgrade my 3640 router to a later IOS version due to the
>recent vulnerabilities, but I am not sure which version to use.
>Not the overall IOS version, but the software feature set version.


>System image file is "slot0:c3640-js-mz.122-32.bin"


Plug that image name (without the slot0 into the Feature Navigator,
http://www.cisco.com/go/fn
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: How include a large array? Edward A. Falk C Programming 1 04-04-2013 08:07 PM
To Find the Cisco IOS Feature Set Pradeep Cisco 3 11-21-2008 01:14 AM
instructions on how to perform an IOS upgrade on a Catalyst 6500 switch (IOS to IOS) Mike Rahl Cisco 1 05-30-2007 05:22 PM
How to determine IOS Feature Sets on Cisco 2600 series routers? John Keeney Cisco 1 06-14-2004 07:05 PM
How to find IOS feature set Kin Ser Cisco 1 07-25-2003 01:52 PM



Advertisments