«

Hi all Cisco Gurus,

I need some assistance

I am monitoring my Cisco 837 via SNMP, at the minute just purely to
track the ADSL line state due to some line problems (specifically Noise
Margin's), but would like to show a counter of the line activation
counts.
Basically, I would like to end up with pretty much the same information
that you can get from the console using "sh dsl int atm 0" - but
without the console part .

I've been through the Cisco ADSL MIB file, but can not find any
reference to the activations - does anyone know the OID (assuming it is
available)?

Kind regards,

Andy Neillans

"Andrew Neillans" <> wrote in message
news: oups.com...
> Hi all Cisco Gurus,
>
> I need some assistance
>
> I am monitoring my Cisco 837 via SNMP, at the minute just purely to
> track the ADSL line state due to some line problems (specifically Noise
> Margin's), but would like to show a counter of the line activation
> counts.
> Basically, I would like to end up with pretty much the same information
> that you can get from the console using "sh dsl int atm 0" - but
> without the console part .
>
> I've been through the Cisco ADSL MIB file, but can not find any
> reference to the activations - does anyone know the OID (assuming it is
> available)?
>
> Kind regards,
>
> Andy Neillans

Hi there, I don't know about a specific OID for that value (can't say I've
seen it myself) though you might be able to achieve something equivalent
using adslAturPerfLofs (1.3.6.1.2.1.10.94.1.1.7.1.1(.10)). I don't know if
this will suit you though on my own 837 I have this graphed as a gauge value
(rather than delta) and increments by 1 each time the line retrains. The
similar adslAtucPerfLofs doesn't work like this for me though as this does
increment occasionally without a retrain ocurring.

Hope that helps some.