«

Trying to set up a pix as a vpn server with little luck.

pptp client: 10.223.1.66 10.223.1.36
pptp server: 10.223.1.35

Pings from .6 to .36 are unsuccessful. Arp fuctions properly. Have tried
acl permitting ip any any on the interface. Basis of configuration
follows.

int e1 auto
ip address inside 10.223.1.35 255.255.255.0
route inside 0 0 10.223.1.2
ip local pool pptp 10.223.1.36-10.223.1.37
sysopt conn permit-pptp
vpdn group pptp acept dialin pptp
vpdn group pptp
vpdn group pptp
vpdn group pptp
vpdn group pptp

Trying to set up a pix as a vpn server with little luck.

pptp client: 10.223.1.66 10.223.1.36
pptp server: 10.223.1.35

Pings from .6 to .36 are unsuccessful. Arp fuctions properly. Have tried
acl permitting ip any any on the interface. Basis of configuration
follows.

int e1 auto
ip address inside 10.223.1.35 255.255.255.0
route inside 0 0 10.223.1.2
ip local pool pptp 10.223.1.36-10.223.1.37
sysopt conn permit-pptp
vpdn group pptp accept dialin pptp
vpdn group pptp ppp auth mschap
vpdn group pptp ppp encryp mppe 128 req
vpdn group pptp client config address local pptp
vpdn group pptp client auth local
vpdn username username password password
vpdn enable inside