It turns out my vendor shipped the router with the wrong IOS and the
wrong feature set cd, so I am waiting for my smartnet sub to start and
then i will download the files from there.
Thanks for reading.
east.Usenet-News.net wrote:
> What is the exact file name you specified when indicating the boot system
> flash imagename?
>
> Did you include the .bin at the end?
>
> The IOS should look something like c2800-advancedipservices-mz.123-20.bin or
> something like that(can't remember exactly what it looks like for the 2800
> series)
>
> "Ranga" <> wrote in message
> news: oups.com...
> > System Bootstrap, Verstion 12.3 (8r) T9, realease (fc1)
> > C2801 Processor with 196608 Kbytes of main memory
> > IOS versuin 12.4(1C)
> >
> > I am a newbie at this so please excuse any questions if they seem
> > trivial.
> > I have a cd with advanced IP services
> > S28NAISK9-12406T Cisco 2800 ADVANCED IP SERVICES
> > 36226996
> > S28NAISK9-12407 Cisco 2800 ADVANCED IP SERVICES
> > 32452760
> >
> > I am trying to get this to run, I copy it via tftp to the router and
> > try set it up as flash using
> >
> > conf term
> > no boot system flash oldflashimagename
> > boot system flash flashimage
> > exit
> >
> > reload
> >
> > This does not work. I get an invalid flash message. If i try to use
> > SDM it tells me that the images are invalid. This CD is directly from
> > Cisco so i know its fine. I am guessing maybe i might need to load the
> > one file into the boot strap and the other into the flash, but i have
> > no idea how to do this. Can anyone point me in the right direction?
> > Also i have an HWIC cable D-2 card that we want to setup for failover,
> > but it comes up as
> > %CFG-3-Card_not_supported: Unrecognized cookie format for card!Port
> > statistics for unclassified packets is not turned on
> >
> >
> > Any assistance would be appreciated
> >
|
Similar Threads
