«

I apologize if this message appears 2x.

Hello,

Here is my desired configuration:

Customer 1 = PPTP (my office) -> PIX -> Internet -> PIX (This works!)
Customer 2 = Contivity VPN Client (my office) -> PIX -> Internet ->
Contivity 600 (Does not work)

I own the PIX, a customer owns the Contivity.

I have the PIX working, I needed to be able to connect to a customer's
PIX VPN via PPTP which is working fine (customer 1). But customer 2
has a Contivity 600, I can connect to them via my 'linksys' box so I
know it works, when I replace the linksys with the PIX the connection
does not work, the Contivity Client responds with "Login Failure do to:
Remote host not responding" and the PIX log gets the message "302015:
Built outbound UDP connection 56 for outside:<My customers VPN IP>/500
to inside <My PC's IP>/500 (<My Outside IP>/".

I think the request is going out via the contivity client, but not
getting back to the client properly.

Any help?

My CFG.

Result of firewall command: "show running-config"

: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname myPix
domain-name myDomain.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.167.0 WirelessSubnet
name 192.168.169.0 WiredSubnet
access-list inside_access_in permit ip any any
access-list inside_access_in permit icmp any any traceroute
access-list inside_outbound_nat0_acl permit ip WiredSubnet
255.255.255.0 <OUTSIDENET> 255.255.252.0
access-list inside_outbound_nat0_acl permit ip any 192.168.169.160
255.255.255.224
access-list outside_cryptomap_20 permit ip WiredSubnet 255.255.255.0
<OUTSIDENET> 255.255.252.0
pager lines 24
logging on
logging timestamp
logging console debugging
logging trap debugging
mtu outside 1500
mtu inside 1500
ip address outside <OUTSIDE IP> 255.255.252.0
ip address inside 192.168.169.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPNPool 192.168.169.160-192.168.169.180
pdm location WirelessSubnet 255.255.255.240 inside
pdm location 192.168.169.160 255.255.255.224 outside
pdm location 192.168.169.14 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 <OUTSIDE GW>
timeout xlate 0:10:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:00:00 absolute uauth 0:10:00 inactivity
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server RADIUS (inside) host 192.168.169.14 myKey timeout 5
aaa-server LOCAL protocol local
http server enable
http WiredSubnet 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-pptp
auth-prompt prompt My Prompt
auth-prompt accept My Accept
auth-prompt reject My Reject
isakmp nat-traversal 20
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto required
vpdn group PPTP-VPDN-GROUP client configuration address local VPNPool
vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.169.14
192.168.169.15
vpdn group PPTP-VPDN-GROUP client authentication aaa RADIUS
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn username 604Jamie password *********
vpdn enable outside
vpdn enable inside
dhcpd auto_config outside
dhcprelay server 192.168.169.14 inside
dhcprelay server 192.168.169.15 inside
terminal width 80

have you tried the fixup for ipsec to allow the nortel client to traverse ?

"Jamie Mcc" <> wrote in message
news: oups.com...
> I apologize if this message appears 2x.
>
> Hello,
>
> Here is my desired configuration:
>
> Customer 1 = PPTP (my office) -> PIX -> Internet -> PIX (This works!)
> Customer 2 = Contivity VPN Client (my office) -> PIX -> Internet ->
> Contivity 600 (Does not work)
>
> I own the PIX, a customer owns the Contivity.
>
> I have the PIX working, I needed to be able to connect to a customer's
> PIX VPN via PPTP which is working fine (customer 1). But customer 2
> has a Contivity 600, I can connect to them via my 'linksys' box so I
> know it works, when I replace the linksys with the PIX the connection
> does not work, the Contivity Client responds with "Login Failure do to:
> Remote host not responding" and the PIX log gets the message "302015:
> Built outbound UDP connection 56 for outside:<My customers VPN IP>/500
> to inside <My PC's IP>/500 (<My Outside IP>/".
>
> I think the request is going out via the contivity client, but not
> getting back to the client properly.
>
> Any help?
>
> My CFG.
>
> Result of firewall command: "show running-config"
>
> : Saved
> :
> PIX Version 6.3(5)
> interface ethernet0 auto
> interface ethernet1 100full
> nameif ethernet0 outside security0
> nameif ethernet1 inside security100
> enable password 8Ry2YjIyt7RRXU24 encrypted
> passwd 2KFQnbNIdI.2KYOU encrypted
> hostname myPix
> domain-name myDomain.local
> fixup protocol dns maximum-length 512
> fixup protocol ftp 21
> fixup protocol h323 h225 1720
> fixup protocol h323 ras 1718-1719
> fixup protocol http 80
> fixup protocol pptp 1723
> fixup protocol rsh 514
> fixup protocol rtsp 554
> fixup protocol sip 5060
> fixup protocol sip udp 5060
> fixup protocol skinny 2000
> fixup protocol smtp 25
> fixup protocol sqlnet 1521
> fixup protocol tftp 69
> names
> name 192.168.167.0 WirelessSubnet
> name 192.168.169.0 WiredSubnet
> access-list inside_access_in permit ip any any
> access-list inside_access_in permit icmp any any traceroute
> access-list inside_outbound_nat0_acl permit ip WiredSubnet
> 255.255.255.0 <OUTSIDENET> 255.255.252.0
> access-list inside_outbound_nat0_acl permit ip any 192.168.169.160
> 255.255.255.224
> access-list outside_cryptomap_20 permit ip WiredSubnet 255.255.255.0
> <OUTSIDENET> 255.255.252.0
> pager lines 24
> logging on
> logging timestamp
> logging console debugging
> logging trap debugging
> mtu outside 1500
> mtu inside 1500
> ip address outside <OUTSIDE IP> 255.255.252.0
> ip address inside 192.168.169.1 255.255.255.0
> ip audit info action alarm
> ip audit attack action alarm
> ip local pool VPNPool 192.168.169.160-192.168.169.180
> pdm location WirelessSubnet 255.255.255.240 inside
> pdm location 192.168.169.160 255.255.255.224 outside
> pdm location 192.168.169.14 255.255.255.255 inside
> pdm logging informational 100
> pdm history enable
> arp timeout 14400
> global (outside) 1 interface
> nat (inside) 0 access-list inside_outbound_nat0_acl
> nat (inside) 1 0.0.0.0 0.0.0.0 0 0
> access-group inside_access_in in interface inside
> route outside 0.0.0.0 0.0.0.0 <OUTSIDE GW>
> timeout xlate 0:10:00
> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
> 1:00:00
> timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
> timeout sip-disconnect 0:02:00 sip-invite 0:03:00
> timeout uauth 0:00:00 absolute uauth 0:10:00 inactivity
> aaa-server TACACS+ protocol tacacs+
> aaa-server TACACS+ max-failed-attempts 3
> aaa-server TACACS+ deadtime 10
> aaa-server RADIUS protocol radius
> aaa-server RADIUS max-failed-attempts 3
> aaa-server RADIUS deadtime 10
> aaa-server RADIUS (inside) host 192.168.169.14 myKey timeout 5
> aaa-server LOCAL protocol local
> http server enable
> http WiredSubnet 255.255.255.0 inside
> no snmp-server location
> no snmp-server contact
> snmp-server community public
> no snmp-server enable traps
> floodguard enable
> sysopt connection permit-pptp
> auth-prompt prompt My Prompt
> auth-prompt accept My Accept
> auth-prompt reject My Reject
> isakmp nat-traversal 20
> telnet timeout 5
> ssh timeout 5
> console timeout 0
> vpdn group PPTP-VPDN-GROUP accept dialin pptp
> vpdn group PPTP-VPDN-GROUP ppp authentication pap
> vpdn group PPTP-VPDN-GROUP ppp authentication chap
> vpdn group PPTP-VPDN-GROUP ppp authentication mschap
> vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto required
> vpdn group PPTP-VPDN-GROUP client configuration address local VPNPool
> vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.169.14
> 192.168.169.15
> vpdn group PPTP-VPDN-GROUP client authentication aaa RADIUS
> vpdn group PPTP-VPDN-GROUP pptp echo 60
> vpdn username 604Jamie password *********
> vpdn enable outside
> vpdn enable inside
> dhcpd auto_config outside
> dhcprelay server 192.168.169.14 inside
> dhcprelay server 192.168.169.15 inside
> terminal width 80
>