> WPA-PSK AND D-LINK DWL-2100AP / DWL-G650
WPA-PSK AND D-LINK DWL-2100AP / DWL-G650
Anyone any thoughts on the following:
D-Link DWL-2100AP client DWL-G650 boith support WPA-PSK encryption,
capable of burst 108Mb transfer speeds.
The 2100AP is a segement of a wired network supporting a few
Using WEP encrpytion the link runs at 54Mb and is extabslished fine on
channel 10 with MAC control enabled and SSID broadcasting disabled.
However, as soon as I employ WPA-PSK on the 2100AP and G650 clients
the link speed drops to 2Mb with a signal strenght of 100%
Why does the link speed drop down to 2Mb although the XP status for
the interface reports it running at 108Mb.
More importantly the TCP/IP settings from the network DHCP server are
lost and ipconfig /renew reports that the DHCP server time outs?
Strange behaviour, as soon as I revert to WEP 64-bit Shared key the
TCP/IP settings are picked up and all is fine again?
Any thoughts would be welcome, because I need to employ WPA-PSK.
will two APs talk to each other?
Is WPS compatible with Smart client as defined in WISPr guidelines
Show Printable Version
Email this Page
post new threads
edit your posts
HTML code is
if and and vs if and,and
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc..
SEO by vBSEO ©2010, Crawlability, Inc.