«

Bonjour,

Nous souhaitons utiliser le CISCO 1801 avec module ADSL et ISDN en meme
temps : ISDN backup de ADSL

Néanmoins aucune version IOS testée ne permet leur mise en place en
meme temps.
12.3 (14)YT1 ADSL fonctionne et ISDN non
12.3(YT1 ISDN fonctionne et ADSL non

ci-dessous un debug avec version 12.3 (14)YT1

#debug isdn events

#isdn test call interface bri 0 092921500





*Oct 10 12:04:26.042: ISDN BR0 EVENT: UserIdle: callid 0x8024 received
ISDN_CALL (0x0)

*Oct 10 12:04:26.042: ISDN BR0 EVENTd: UserIdle: Call to 092921500 at
64 Kb/s

*Oct 10 12:04:26.042: ISDN BR0 EVENTd: isdn_get_guid: Got Guid
D640B9538025

*Oct 10 12:04:26.042: ISDN BR0 EVENT: process_bri_call: call id 0x8024,
called_n

umber 092921500, Guid D640B9538025 speed 64, call type DATA, bchan -1
clng_num n

one

*Oct 10 12:04:26.042: ISDN BR0 EVENTd: process_bri_call: No name in GTD

*Oct 10 12:04:26.042: ISDN BR0 SERROR: isdn_get_display_text_from_gtd:
false ret



*Oct 10 12:04:26.042: ISDN BR0 SERROR: isdn_get_mlpp_from_gtd: MLPP
from GTD failed

*Oct 10 12:04:26.042: ISDN BR0 EVENTd: calltrkr_setup_received:
isdn_info=220691

2444l, call_id=0x8024 ORIGINATE

*Oct 10 12:04:26.042: ISDN BR0 EVENTd: calltrkr_setup_received:
calltracker disa

bled

*Oct 10 12:04:34.042: ISDN EVENTd: cc_clear_free_list freed 0x83C5BDA4

*Oct 10 12:04:34.042: ISDN BR0 EVENT: process_rxstate: ces/callid
1/0x8024 callt

ype 1 HOST_DISCONNECT_ACK

*Oct 10 12:04:34.042: ISDN BR0 EVENTd: calltrkr_call_cleared:
isdn_info=0x838ACF

BC, call_id=0x8024

*Oct 10 12:04:34.042: ISDN BR0 EVENTd: calltrkr_call_cleared: hndl=0l,
cause=0,

Unknown cause value

*Oct 10 12:04:34.042: ISDN BR0 **ERROR**: host_disconnect_ack: Unfound
B-channel

on Disconnect_Ack call id 0x8024





Par contre dans la version 12.3(YT1, l'interface ISDN fonnctionne
parfaitement. Le même debug donne le résultat suivant :



*Oct 10 12:01:50.087: ISDN BR0 EVENT: UserIdle: callid 0x8005 received
ISDN_CALL (0x0)

*Oct 10 12:01:50.087: ISDN BR0 EVENT: process_bri_call: call id 0x8005,
called_n

umber 092921500, Guid BR0 speed 64, call type DATA, bchan -1 clng_num
none

*Oct 10 12:01:50.103: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI
65 change

d to up

*Oct 10 12:01:50.307: ISDN BR0 EVENT: process_rxstate: ces/callid
1/0x8005 callt

ype 1 HOST_PROCEEDING

*Oct 10 12:01:50.911: ISDN BR0 EVENT: process_rxstate: ces/callid
1/0x8005 callt

ype 1 HOST_CONNECT

*Oct 10 12:01:50.911: %LINK-3-UPDOWN: Interface BRI0:1, changed state
to up

*Oct 10 12:01:51.911: %LINEPROTO-5-UPDOWN: Line protocol on Interface
BRI0:1, ch

anged state to up

*Oct 10 12:01:56.911: %ISDN-6-CONNECT: Interface BRI0:1 is now
connected to 0929

21500 unknown

*Oct 10 12:02:00.863: ISDN BR0 EVENT: process_rxstate: ces/callid
1/0x8005 callt

ype 1 HOST_DISCONNECT

*Oct 10 12:02:00.863: %ISDN-6-DISCONNECT: Interface BRI0:1
disconnected from 09

2921500 , call lasted 9 seconds

*Oct 10 12:02:00.863: %LINK-3-UPDOWN: Interface BRI0:1, changed state
to down

*Oct 10 12:02:00.939: ISDN BR0 EVENT: process_rxstate: ces/callid
1/0x8005 callt

ype 1 HOST_DISCONNECT_ACK

*Oct 10 12:02:01.863: %LINEPROTO-5-UPDOWN: Line protocol on Interface
BRI0:1, ch

anged state to down


Any help

J'ai un idee.

Peut-etre les "defaults" pour les deux versions sont differents.

Il y a aussi le 12.3(YI3 . C'est gh[I]jk trois, ne pas treize.
Peut-etre, le quatrieme fois, il va bien. Zero (ou rien), un, deux,
trois.

debug isdn ...
debug isdn q931
debug isdn q921

Je regret que je n'ai pas des accents et que je n'ecrie pas francais si
bien.

Bonne chance.

++++++++++++++++++
Possibly the defaults in the two versions are different.

You could try 12.3(YI3, maybe the 4th build was better.

Also I think that you can turn on more ISDN debugging.

debug isdn ...
debug isdn q931
debug isdn q921