Wireless Networking - Wireless Problem with cert

07-21-2004, 02:25 PM

Hi,

i am installing a secure wireless solution with sbs2003, IAS, stand alone
CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
Netgear under Radius-Clients. On the Netgear i have made the settings for
the Radius Server with ip and shared secret and in Network Authentication i
use WPA with Radius and in Data Encrypton TKIP.
Problem is when the Client connects to the Access Point a error message was
generated in the Logfiles for system: ID18 IAS error Access-Request from
Radius-Client has an invalid Message Authenticator Attribut.

Any help would be appreciated.
Bernd

mailmann

07-22-2004, 10:58 AM

Had the same problem. Had to use a shared secret for the access point
and IAS of 13 characters or less to get it to work. The latest
firmware had the same issue.

On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote:

>Hi,
>
>i am installing a secure wireless solution with sbs2003, IAS, stand alone
>CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
>Netgear under Radius-Clients. On the Netgear i have made the settings for
>the Radius Server with ip and shared secret and in Network Authentication i
>use WPA with Radius and in Data Encrypton TKIP.
>Problem is when the Client connects to the Access Point a error message was
>generated in the Logfiles for system: ID18 IAS error Access-Request from
>Radius-Client has an invalid Message Authenticator Attribut.
>
>Any help would be appreciated.
>Bernd
>

No One

07-22-2004, 12:52 PM

I change the password and everything works fine.

Many thanks !

"No One" <> schrieb im Newsbeitrag
news:...
> Had the same problem. Had to use a shared secret for the access point
> and IAS of 13 characters or less to get it to work. The latest
> firmware had the same issue.
>
> On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote:
>
> >Hi,
> >
> >i am installing a secure wireless solution with sbs2003, IAS, stand alone
> >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the
> >Netgear under Radius-Clients. On the Netgear i have made the settings for
> >the Radius Server with ip and shared secret and in Network Authentication
i
> >use WPA with Radius and in Data Encrypton TKIP.
> >Problem is when the Client connects to the Access Point a error message
was
> >generated in the Logfiles for system: ID18 IAS error Access-Request from
> >Radius-Client has an invalid Message Authenticator Attribut.
> >
> >Any help would be appreciated.
> >Bernd
> >
>

mailmann

07-22-2004, 10:58 AM	#2
No One Posts: n/a	Re: Wireless Problem with cert Had the same problem. Had to use a shared secret for the access point and IAS of 13 characters or less to get it to work. The latest firmware had the same issue. On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote: >Hi, > >i am installing a secure wireless solution with sbs2003, IAS, stand alone >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the >Netgear under Radius-Clients. On the Netgear i have made the settings for >the Radius Server with ip and shared secret and in Network Authentication i >use WPA with Radius and in Data Encrypton TKIP. >Problem is when the Client connects to the Access Point a error message was >generated in the Logfiles for system: ID18 IAS error Access-Request from >Radius-Client has an invalid Message Authenticator Attribut. > >Any help would be appreciated. >Bernd > No One

07-22-2004, 12:52 PM	#3
mailmann Posts: n/a	Re: Wireless Problem with cert I change the password and everything works fine. Many thanks ! "No One" <> schrieb im Newsbeitrag news:... > Had the same problem. Had to use a shared secret for the access point > and IAS of 13 characters or less to get it to work. The latest > firmware had the same issue. > > On Wed, 21 Jul 2004 15:25:05 +0200, "mailmann" <> wrote: > > >Hi, > > > >i am installing a secure wireless solution with sbs2003, IAS, stand alone > >CA. Acess point is an Netgear WG302. In IAS i have made the entry for the > >Netgear under Radius-Clients. On the Netgear i have made the settings for > >the Radius Server with ip and shared secret and in Network Authentication i > >use WPA with Radius and in Data Encrypton TKIP. > >Problem is when the Client connects to the Access Point a error message was > >generated in the Logfiles for system: ID18 IAS error Access-Request from > >Radius-Client has an invalid Message Authenticator Attribut. > > > >Any help would be appreciated. > >Bernd > > > mailmann

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Comcast + Wireless Internet Problem	shadoweloc	General Help Related Topics	1	07-01-2008 06:19 PM
Toshiba Satellite Wireless Problem	wahoo2	Hardware	2	07-02-2006 05:01 PM
Re: Wireless Network Problem on a Laptop	Tom MacIntyre	A+ Certification	0	11-19-2005 05:05 PM
Re: Wireless Network Problem on a Laptop	Adam Leinss	A+ Certification	1	11-19-2005 09:27 AM
Re: wireless internet problem	PJS	A+ Certification	0	03-07-2004 10:44 PM

07-21-2004, 02:25 PM	#1
	Wireless Problem with cert Hi, i am installing a secure wireless solution with sbs2003, IAS, stand alone CA. Acess point is an Netgear WG302. In IAS i have made the entry for the Netgear under Radius-Clients. On the Netgear i have made the settings for the Radius Server with ip and shared secret and in Network Authentication i use WPA with Radius and in Data Encrypton TKIP. Problem is when the Client connects to the Access Point a error message was generated in the Logfiles for system: ID18 IAS error Access-Request from Radius-Client has an invalid Message Authenticator Attribut. Any help would be appreciated. Bernd mailmann