Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > cant get commands under "router eigrp #" to work?

Reply
Thread Tools

cant get commands under "router eigrp #" to work?

 
 
Scott Townsend
Guest
Posts: n/a
 
      06-09-2005
I'm trying add the following commands to my router and its not liking the
commands under the "router eigrp 2" command.

router eigrp 2
network 10.0.0.0
default-metric 1000 100 255 1 1500
no auto-summary

I get the Following:
donner.sf-ts(config)# router eigrp 2
donner.sf-ts(config)# network 10.0.0.0
^
% Invalid input detected at '^' marker. (it points to the 'w' in network)


Works fine on my 11.2 router.... Any Ideas

Here is the "Show Version" on my router...


Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IK8OS-L), Version 12.2(13), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 19-Nov-02 21:07 by pwade
Image text-base: 0x0306FD38, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
SOFTWA)

donner.sf-ts uptime is 1 hour, 29 minutes
System returned to ROM by reload
System image file is "flash:c2500-ik8os-l.122-13.bin"

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 02053789, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102


 
Reply With Quote
 
 
 
 
David West
Guest
Posts: n/a
 
      06-09-2005
Once you start eigrp with the "router eigrp 2" command, the prompt
should change to config-rtr. Since it's not doing that, I'm guessing
routing is not enabled on that router, look for "no ip routing"
somewhere....an "ip routing" should fix you.

-DW


Scott Townsend wrote:
> I'm trying add the following commands to my router and its not liking the
> commands under the "router eigrp 2" command.
>
> router eigrp 2
> network 10.0.0.0
> default-metric 1000 100 255 1 1500
> no auto-summary
>
> I get the Following:
> donner.sf-ts(config)# router eigrp 2
> donner.sf-ts(config)# network 10.0.0.0
> ^
> % Invalid input detected at '^' marker. (it points to the 'w' in network)
>
>
> Works fine on my 11.2 router.... Any Ideas
>
> Here is the "Show Version" on my router...
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-IK8OS-L), Version 12.2(13), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Tue 19-Nov-02 21:07 by pwade
> Image text-base: 0x0306FD38, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
> SOFTWA)
>
> donner.sf-ts uptime is 1 hour, 29 minutes
> System returned to ROM by reload
> System image file is "flash:c2500-ik8os-l.122-13.bin"
>
> cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.
> Processor board ID 02053789, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
>

 
Reply With Quote
 
 
 
 
Scott Townsend
Guest
Posts: n/a
 
      06-09-2005
Ah... bliss...

Thank you!

Not sure why routing was turned off. It is a Dual Ethernet and was last
routing between DSL, local LAN and a Serial Link... Maybe since I was using
NAT I had it off.

Thanks again,
Scott<-
"David West" <(E-Mail Removed)> wrote in message
news:yQ_pe.120$fV.73@okepread06...
> Once you start eigrp with the "router eigrp 2" command, the prompt should
> change to config-rtr. Since it's not doing that, I'm guessing routing is
> not enabled on that router, look for "no ip routing" somewhere....an "ip
> routing" should fix you.
>
> -DW
>
>
> Scott Townsend wrote:
>> I'm trying add the following commands to my router and its not liking the
>> commands under the "router eigrp 2" command.
>>
>> router eigrp 2
>> network 10.0.0.0
>> default-metric 1000 100 255 1 1500
>> no auto-summary
>>
>> I get the Following:
>> donner.sf-ts(config)# router eigrp 2
>> donner.sf-ts(config)# network 10.0.0.0
>> ^
>> % Invalid input detected at '^' marker. (it points to the 'w' in network)
>>
>>
>> Works fine on my 11.2 router.... Any Ideas
>>
>> Here is the "Show Version" on my router...
>>
>>
>> Cisco Internetwork Operating System Software
>> IOS (tm) 2500 Software (C2500-IK8OS-L), Version 12.2(13), RELEASE
>> SOFTWARE (fc1)
>> Copyright (c) 1986-2002 by cisco Systems, Inc.
>> Compiled Tue 19-Nov-02 21:07 by pwade
>> Image text-base: 0x0306FD38, data-base: 0x00001000
>>
>> ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
>> BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
>> SOFTWA)
>>
>> donner.sf-ts uptime is 1 hour, 29 minutes
>> System returned to ROM by reload
>> System image file is "flash:c2500-ik8os-l.122-13.bin"
>>
>> cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of
>> memory.
>> Processor board ID 02053789, with hardware revision 00000000
>> Bridging software.
>> X.25 software, Version 3.0.0.
>> 2 Ethernet/IEEE 802.3 interface(s)
>> 2 Serial network interface(s)
>> 32K bytes of non-volatile configuration memory.
>> 16384K bytes of processor board System flash (Read ONLY)
>>
>> Configuration register is 0x2102
>>


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
cant compile on linux system.cant compile on cant compile onlinux system. Nagaraj C++ 1 03-01-2007 11:18 AM
EIGRP, Want to prevent any EIGRP traffic to a interface BG Cisco 3 02-09-2006 08:05 PM
man i cant belive i cant get help please unclejesse01 DVD Video 2 04-14-2005 03:15 PM
Need Help Differentiating Bad Commands From Incomplete Commands Tim Stanka Python 1 08-02-2004 02:08 AM
Re: man pages for C commands (GCC commands) Ben Pfaff C Programming 4 06-28-2003 06:21 PM



Advertisments