Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > configuring rate-limiting on a cat 6513 running IOS

Thread Tools

configuring rate-limiting on a cat 6513 running IOS

Paul IJpelaar
Posts: n/a

I have the following problem:

A server connected to a 6513 1Gbps ethernet port distributes software to
3500 clients behind a 34Mbps line (telecomuters). Also this server is used
for the local 100Mbps clients. Normally when no software is distributed the
avg. load of the line to the telecommuters is about 10Mbps. When a scheduled
softwaredistribution runs the line gets congested.
What I want is that all traffic comming from the Software distribution
servers IP address to the subnet where the remote clients are, is limited
to, say 24Mbps, so there still is about 10 Mbps for normal operation and the
softwaredistribution is throttled.

I turned the cisco site upside-down but could not find a solution the
achieve this.

Anyone any suggestions or examples to tackle this problem?
Please reply to group and Removed)

Thanks in advance!
Paul IJpelaar

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
LAN, Switching and Routing: Multicast advice needed on Cat 6513 IOS12.2SXF5 Hoffa Cisco 2 02-15-2008 03:48 PM
GBIC moved from Cat 3508 --> Cat 6513 shows wrong media type Hoffa Cisco 14 09-21-2006 04:25 AM
Cat 4503 not receiving VTP info from 6513... Cisco 1 05-22-2006 03:50 PM
redundant sup 720s in a 6513 running IOS lfnetworking Cisco 2 04-20-2006 05:24 PM