Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > UK VOIP > VOIPcheap and PAP2 configuration

Reply
Thread Tools

VOIPcheap and PAP2 configuration

 
 
Stan
Guest
Posts: n/a
 
      12-10-2006
On Sun, 10 Dec 2006 08:24:28 UTC, "Stan" <(E-Mail Removed)>
opined:
> On Sun, 10 Dec 2006 00:12:15 UTC, Brian <(E-Mail Removed)> opined:
> > On 2006-12-09, Stan <(E-Mail Removed)> wrote:


> AHA!!! THAT is what I have been after. That is what has not been done.
>
>
> Why it has not been done is that, in its instructions
> <http://voipcheap.com/en/sip.html>, a printed copy of which is lying
> before me even as I write, there is no mention of this, or of how to
> do it. Nor does the FAQ say anything about it. It is a well-kept
> secret. How must I go about registering the ATA?
>
> > Having authenticated you a message is sent to the PAPT2 saying you can
> > make calls. This appears in System Information as Registration State:
> > Registered. You need to have the Register: setting for Line 1 set to
> > 'yes' and refreshing the web page is normally needed to see any change
> > to the System Information. With a successful registration there is a
> > dial tone.
> >
> > [Snip]
> >
> > > Tomorrow I'll make a text file of the configuration. If anybody thinks
> > > viewing it will help diagnose the problem, I will be happy to send it.
> > > I am too new here to know if posting it on the forum is permissible.

> >
> > Viewing it would very helpful. I cannot envisage anyone objecting. Now
> > you'll not forget to replace password with xxxxx will you?

>
> The passwords don't show up in the printout.
>
> > Brian.


Here is the printout. I had considered ZIPping it, but decided that
30K is not enormous, and it is more convenient for readers that it is
not compressed. I will be grateful for any and all pertinent comments.

*****begin
#
# sip
#

sip_max_forward = '70'

sip_max_redirection = '5'

sip_max_auth = '2'

sip_sip_user_agent_name = '$VERSION'

sip_sip_server_name = '$VERSION'

sip_sip_reg_user_agent_name = ''

sip_sip_accept_language = ''

sip_dtmf_relay_mime_type = 'application/dtmf-relay'

sip_hook_flash_mime_type = 'application/hook-flash'

# possible values: 'yes', 'no'
sip_remove_last_reg = 'no'

# possible values: 'yes', 'no'
sip_use_compact_header = 'no'

# possible values: 'yes', 'no'
sip_escape_display_name = 'no'

sip_sip_t1 = '.5'

sip_sip_t2 = '4'

sip_sip_t4 = '5'

sip_sip_timer_b = '32'

sip_sip_timer_f = '32'

sip_sip_timer_h = '32'

sip_sip_timer_d = '32'

sip_sip_timer_j = '32'

sip_invite_expires = '240'

sip_reinvite_expires = '30'

sip_reg_min_expires = '1'

sip_reg_max_expires = '7200'

sip_reg_retry_intvl = '30'

sip_reg_retry_long_intvl = '1200'

sip_sit1_rsc = ''

sip_sit2_rsc = ''

sip_sit3_rsc = ''

sip_sit4_rsc = ''

sip_try_backup_rsc = ''

sip_retry_reg_rsc = ''

sip_rtp_port_min = '16384'

sip_rtp_port_max = '16482'

sip_rtp_packet_size = '0.030'

sip_max_rtp_icmp_err = '0'

sip_rtcp_tx_interval = '0'

# possible values: 'yes', 'no'
sip_no_udp_checksum = 'no'

# possible values: 'yes', 'no'
sip_stats_in_bye = 'no'

sip_nse_dynamic_payload = '100'

sip_avt_dynamic_payload = '101'

sip_inforeq_dynamic_payload = ''

sip_g726r16_dynamic_payload = '98'

sip_g726r24_dynamic_payload = '97'

sip_g726r40_dynamic_payload = '96'

sip_g729b_dynamic_payload = '99'

sip_nse_codec_name = 'NSE'

sip_avt_codec_name = 'telephone-event'

sip_g711u_codec_name = 'PCMU'

sip_g711a_codec_name = 'PCMA'

sip_g726r16_codec_name = 'G726-16'

sip_g726r24_codec_name = 'G726-24'

sip_g726r32_codec_name = 'G726-32'

sip_g726r40_codec_name = 'G726-40'

sip_g729a_codec_name = 'G729a'

sip_g729b_codec_name = 'G729ab'

sip_g723_codec_name = 'G723'

# possible values: 'yes', 'no'
sip_handle_via_received = 'no'

# possible values: 'yes', 'no'
sip_handle_via_rport = 'no'

# possible values: 'yes', 'no'
sip_insert_via_received = 'no'

# possible values: 'yes', 'no'
sip_insert_via_rport = 'no'

# possible values: 'yes', 'no'
sip_substitute_via_addr = 'no'

# possible values: 'yes', 'no'
sip_send_resp_to_src_port = 'no'

# possible values: 'yes', 'no'
sip_stun_enable = 'yes'

# possible values: 'yes', 'no'
sip_stun_test_enable = 'no'

sip_stun_server = 'stun.voipcheap.com'

sip_ext_ip = ''

sip_ext_rtp_port_min = ''

sip_nat_keep_alive_intvl = '15'


#
# regional
#

regional_dial_tone = '350@-19,440@-19;10(*/0/1+2)'

regional_second_dial_tone = '420@-19,520@-19;10(*/0/1+2)'

regional_outside_dial_tone = '420@-16;10(*/0/1)'

regional_prompt_tone = '520@-19,620@-19;10(*/0/1+2)'

regional_busy_tone = '480@-19,620@-19;10(.5/.5/1+2)'

regional_reorder_tone = '480@-19,620@-19;10(.25/.25/1+2)'

regional_off_hook_warning_tone = '480@-10,620@0;10(.125/.125/1+2)'

regional_ring_back_tone = '440@-19,480@-19;*(2/4/1+2)'

regional_confirm_tone = '600@-16;1(.25/.25/1)'

regional_sit1_tone =
'985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)'

regional_sit2_tone =
'914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)'

regional_sit3_tone =
'914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)'

regional_sit4_tone =
'985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)'

regional_mwi_dial_tone = '350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)'

regional_cfwd_dial_tone = '350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)'

regional_holding_tone = '600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)'

regional_conference_tone = '350@-19;20(.1/.1/1,.1/9.7/1)'

regional_secure_call_indication_tone =
'397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)'

regional_feature_invocation_tone = '350@-16;*(.1/.1/1)'

regional_ring1_cadence = '60(2/4)'

regional_ring2_cadence = '60(.3/.2,1/.2,.3/4)'

regional_ring3_cadence = '60(.8/.4,.8/4)'

regional_ring4_cadence = '60(.4/.2,.3/.2,.8/4)'

regional_ring5_cadence = '60(.2/.2,.2/.2,.2/.2,1/4)'

regional_ring6_cadence = '60(.2/.4,.2/.4,.2/4)'

regional_ring7_cadence = '60(.4/.2,.4/.2,.4/4)'

regional_ring8_cadence = '60(0.25/9.75)'

regional_cwt1_cadence = '30(.3/9.7)'

regional_cwt2_cadence = '30(.1/.1, .1/9.7)'

regional_cwt3_cadence = '30(.1/.1, .3/.1, .1/9.3)'

regional_cwt4_cadence = '30(.1/.1,.1/.1,.1/9.5)'

regional_cwt5_cadence = '30(.3/.1,.1/.1,.3/9.1)'

regional_cwt6_cadence = '30(.1/.1,.3/.2,.3/9.1)'

regional_cwt7_cadence = '30(.3/.1,.3/.1,.1/9.1)'

regional_cwt8_cadence = '2.3(.3/2)'

regional_ring1_name = 'Bellcore-r1'

regional_ring2_name = 'Bellcore-r2'

regional_ring3_name = 'Bellcore-r3'

regional_ring4_name = 'Bellcore-r4'

regional_ring5_name = 'Bellcore-r5'

regional_ring6_name = 'Bellcore-r6'

regional_ring7_name = 'Bellcore-r7'

regional_ring8_name = 'Bellcore-r8'

# possible values: 'Sinusoid', 'Trapezoid'
regional_ring_waveform = 'Sinusoid'

regional_ring_frequency = '25'

regional_ring_voltage = '70'

regional_cwt_frequency = '440@-10'

# possible values: 'yes', 'no'
regional_synchronized_ring = 'no'

regional_hook_flash_timer_min = '.1'

regional_hook_flash_timer_max = '.9'

regional_callee_on_hook_delay = '0'

regional_reorder_delay = '5'

regional_call_back_expires = '1800'

regional_call_back_retry_intvl = '30'

regional_call_back_delay = '.5'

regional_vmwi_refresh_intvl = '0'

regional_interdigit_long_timer = '10'

regional_interdigit_short_timer = '3'

regional_cpc_delay = '2'

regional_cpc_duration = '0'

regional_call_return_code = '*69'

regional_blind_transfer_code = '*98'

regional_call_back_act_code = '*66'

regional_call_back_deact_code = '*86'

regional_cfwd_all_act_code = '*72'

regional_cfwd_all_deact_code = '*73'

regional_cfwd_busy_act_code = '*90'

regional_cfwd_busy_deact_code = '*91'

regional_cfwd_no_ans_act_code = '*92'

regional_cfwd_no_ans_deact_code = '*93'

regional_cfwd_last_act_code = '*63'

regional_cfwd_last_deact_code = '*83'

regional_block_last_act_code = '*60'

regional_block_last_deact_code = '*80'

regional_accept_last_act_code = '*64'

regional_accept_last_deact_code = '*84'

regional_cw_act_code = '*56'

regional_cw_deact_code = '*57'

regional_cw_per_call_act_code = '*71'

regional_cw_per_call_deact_code = '*70'

regional_block_cid_act_code = '*67'

regional_block_cid_deact_code = '*68'

regional_block_cid_per_call_act_code = '*81'

regional_block_cid_per_call_deact_code = '*82'

regional_block_anc_act_code = '*77'

regional_block_anc_deact_code = '*87'

regional_dnd_act_code = '*78'

regional_dnd_deact_code = '*79'

regional_cid_act_code = '*65'

regional_cid_deact_code = '*85'

regional_cwcid_act_code = '*25'

regional_cwcid_deact_code = '*45'

regional_dist_ring_act_code = '*26'

regional_dist_ring_deact_code = '*46'

regional_speed_dial_act_code = '*74'

regional_secure_all_call_act_code = '*16'

regional_secure_no_call_act_code = '*17'

regional_secure_one_call_act_code = '*18'

regional_secure_one_call_deact_code = '*19'

regional_conference_act_code = ''

regional_attn_xfer_act_code = ''

regional_modem_line_toggle_code = '*99'

regional_referral_services_codes = ''

regional_feature_dial_services_codes = ''

regional_service_annc_base_number = ''

regional_service_annc_extension_codes = ''

regional_prefer_g711u_code = '*017110'

regional_force_g711u_code = '*027110'

regional_prefer_g711a_code = '*017111'

regional_force_g711a_code = '*027111'

regional_prefer_g723_code = '*01723'

regional_force_g723_code = '*02723'

regional_prefer_g726r16_code = '*0172616'

regional_force_g726r16_code = '*0272616'

regional_prefer_g726r24_code = '*0172624'

regional_force_g726r24_code = '*0272624'

regional_prefer_g726r32_code = '*0172632'

regional_force_g726r32_code = '*0272632'

regional_prefer_g726r40_code = '*0172640'

regional_force_g726r40_code = '*0272640'

regional_prefer_g729a_code = '*01729'

regional_force_g729a_code = '*02729'

regional_set_local_date__mm_dd_ = ''

regional_set_local_time__hh_mm_ = ''

# possible values: 'GMT-12:00', 'GMT-11:00', 'GMT-10:00', 'GMT-09:00',
'GMT-08:00', 'GMT-07:00', 'GMT-06:00', 'GMT-05:00', 'GMT-04:00',
'GMT-03:30', 'GMT-03:00', 'GMT-02:00', 'GMT-01:00', 'GMT',
'GMT+01:00', 'GMT+02:00', 'GMT+03:00', 'GMT+03:30', 'GMT+04:00',
'GMT+05:00', 'GMT+05:30', 'GMT+05:45', 'GMT+06:00', 'GMT+06:30',
'GMT+07:00', 'GMT+08:00', 'GMT+09:00', 'GMT+09:30', 'GMT+10:00',
'GMT+11:00', 'GMT+12:00', 'GMT+13:00'
regional_time_zone = 'GMT+02:00'

# possible values: '600', '900', '600+2.16uF', '900+2.16uF',
'270+750||150nF', '220+820||120nF', '220+820||115nF', '370+620||310nF'
regional_fxs_port_impedance = '600'

regional_daylight_saving_time_rule = 'start=4/-1/7;end=10/1/7;save=1'

regional_fxs_port_input_gain = '-3'

regional_fxs_port_output_gain = '-3'

regional_dtmf_playback_level = '-16'

regional_dtmf_playback_length = '.1'

# possible values: 'yes', 'no'
regional_detect_abcd = 'yes'

# possible values: 'yes', 'no'
regional_playback_abcd = 'yes'

# possible values: 'Bellcore(N.Amer,China)', 'DTMF(Finland,Sweden)',
'DTMF(Denmark)', 'ETSI DTMF', 'ETSI DTMF With PR', 'ETSI DTMF After
Ring', 'ETSI FSK', 'ETSI FSK With PR(UK)'
regional_caller_id_method = 'Bellcore(N.Amer,China)'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
regional_fxs_port_power_limit = '3'

# possible values: 'bell 202', 'v.23'
regional_caller_id_fsk_standard = 'bell 202'

# possible values: 'Default', 'Sweden'
regional_feature_invocation_method = 'Default'


#
# system
#

system_restricted_access_domains = ''

# possible values: 'yes', 'no'
system_enable_web_server = 'yes'

system_web_server_port = '80'

# possible values: 'yes', 'no'
system_enable_web_admin_access = 'yes'

system_admin_passwd = ''

system_user_password = ''

# possible values: 'yes', 'no'
system_dhcp = 'no'

system_static_ip = '192.168.1.150'

system_netmask = '255.255.255.0'

system_gateway = '192.168.1.1'

system_hostname = 'anaheim'

system_domain = 'GOODMAN'

system_primary_dns = ''

system_secondary_dns = ''

# possible values: 'Manual', 'Manual,DHCP', 'DHCP,Manual'
system_dns_server_order = 'Manual'

# possible values: 'Parallel', 'Sequential'
system_dns_query_mode = 'Parallel'

system_syslog_server = ''

system_debug_server = ''

# possible values: '0', '1', '2', '3', '0+H', '1+H', '2+H', '3+H',
'99'
system_debug_level = '0'

system_primary_ntp_server = ''

system_secondary_ntp_server = ''


#
# provisioning
#

# possible values: 'yes', 'no'
provisioning_provision_enable = 'no'

# possible values: 'yes', 'no'
provisioning_resync_on_reset = 'yes'

provisioning_resync_random_delay = '2'

provisioning_resync_periodic = '3600'

provisioning_resync_error_retry_delay = '3600'

provisioning_forced_resync_delay = '14400'

# possible values: 'yes', 'no'
provisioning_resync_from_sip = 'yes'

# possible values: 'yes', 'no'
provisioning_resync_after_upgrade_attempt = 'yes'

provisioning_resync_trigger_1 = ''

provisioning_resync_trigger_2 = ''

# possible values: 'yes', 'no'
provisioning_resync_fails_on_fnf = 'no'

provisioning_profile_rule = '/init.cfg'

provisioning_profile_rule_b = ''

provisioning_profile_rule_c = ''

provisioning_profile_rule_d = ''

provisioning_log_resync_request_msg = '$PN $MAC -- Requesting resync
$SCHEME://$SERVIP:$PORT$PATH'

provisioning_log_resync_success_msg = '$PN $MAC -- Successful resync
$SCHEME://$SERVIP:$PORT$PATH'

provisioning_log_resync_failure_msg = '$PN $MAC -- Resync failed:
$ERR'

provisioning_report_rule = ''

# possible values: 'yes', 'no'
provisioning_upgrade_enable = 'no'

provisioning_upgrade_error_retry_delay = '3600'

provisioning_downgrade_rev_limit = ''

provisioning_upgrade_rule = ''

provisioning_log_upgrade_request_msg = '$PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH'

provisioning_log_upgrade_success_msg = '$PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR'

provisioning_log_upgrade_failure_msg = '$PN $MAC -- Upgrade failed:
$ERR'

provisioning_gpp_a = ''

provisioning_gpp_b = ''

provisioning_gpp_c = ''

provisioning_gpp_d = ''

provisioning_gpp_e = ''

provisioning_gpp_f = ''

provisioning_gpp_g = ''

provisioning_gpp_h = ''

provisioning_gpp_i = ''

provisioning_gpp_j = ''

provisioning_gpp_k = ''

provisioning_gpp_l = ''

provisioning_gpp_m = ''

provisioning_gpp_n = ''

provisioning_gpp_o = ''

provisioning_gpp_p = ''


#
# user_2
#

user_2_cfwd_all_dest = ''

user_2_cfwd_busy_dest = ''

user_2_cfwd_no_ans_dest = ''

user_2_cfwd_no_ans_delay = '20'

user_2_cfwd_sel1_caller = ''

user_2_cfwd_sel1_dest = ''

user_2_cfwd_sel2_caller = ''

user_2_cfwd_sel2_dest = ''

user_2_cfwd_sel3_caller = ''

user_2_cfwd_sel3_dest = ''

user_2_cfwd_sel4_caller = ''

user_2_cfwd_sel4_dest = ''

user_2_cfwd_sel5_caller = ''

user_2_cfwd_sel5_dest = ''

user_2_cfwd_sel6_caller = ''

user_2_cfwd_sel6_dest = ''

user_2_cfwd_sel7_caller = ''

user_2_cfwd_sel7_dest = ''

user_2_cfwd_sel8_caller = ''

user_2_cfwd_sel8_dest = ''

user_2_cfwd_last_caller = ''

user_2_cfwd_last_dest = ''

user_2_block_last_caller = ''

user_2_accept_last_caller = ''

user_2_speed_dial_2 = ''

user_2_speed_dial_3 = ''

user_2_speed_dial_4 = ''

user_2_speed_dial_5 = ''

user_2_speed_dial_6 = ''

user_2_speed_dial_7 = ''

user_2_speed_dial_8 = ''

user_2_speed_dial_9 = ''

# possible values: 'yes', 'no'
user_2_cw_setting = 'yes'

# possible values: 'yes', 'no'
user_2_block_cid_setting = 'no'

# possible values: 'yes', 'no'
user_2_block_anc_setting = 'no'

# possible values: 'yes', 'no'
user_2_dnd_setting = 'no'

# possible values: 'yes', 'no'
user_2_cid_setting = 'yes'

# possible values: 'yes', 'no'
user_2_cwcid_setting = 'yes'

# possible values: 'yes', 'no'
user_2_dist_ring_setting = 'yes'

# possible values: 'yes', 'no'
user_2_secure_call_setting = 'no'

# possible values: 'yes', 'no'
user_2_message_waiting = 'no'

user_2_ring1_caller = ''

user_2_ring2_caller = ''

user_2_ring3_caller = ''

user_2_ring4_caller = ''

user_2_ring5_caller = ''

user_2_ring6_caller = ''

user_2_ring7_caller = ''

user_2_ring8_caller = ''

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_2_default_ring = '1'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_2_default_cwt = '1'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8', 'none'
user_2_hold_reminder_ring = '8'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_2_call_back_ring = '7'

user_2_cfwd_ring_splash_len = '0'

user_2_cblk_ring_splash_len = '0'

user_2_vmwi_ring_splash_len = '0'

# possible values: 'New VM Available', 'New VM Becomes Available',
'New VM Arrives'
user_2_vmwi_ring_policy = 'New VM Available'

# possible values: 'yes', 'no'
user_2_ring_on_no_new_vm = 'no'


#
# user_1
#

user_1_cfwd_all_dest = ''

user_1_cfwd_busy_dest = ''

user_1_cfwd_no_ans_dest = ''

user_1_cfwd_no_ans_delay = '20'

user_1_cfwd_sel1_caller = ''

user_1_cfwd_sel1_dest = ''

user_1_cfwd_sel2_caller = ''

user_1_cfwd_sel2_dest = ''

user_1_cfwd_sel3_caller = ''

user_1_cfwd_sel3_dest = ''

user_1_cfwd_sel4_caller = ''

user_1_cfwd_sel4_dest = ''

user_1_cfwd_sel5_caller = ''

user_1_cfwd_sel5_dest = ''

user_1_cfwd_sel6_caller = ''

user_1_cfwd_sel6_dest = ''

user_1_cfwd_sel7_caller = ''

user_1_cfwd_sel7_dest = ''

user_1_cfwd_sel8_caller = ''

user_1_cfwd_sel8_dest = ''

user_1_cfwd_last_caller = ''

user_1_cfwd_last_dest = ''

user_1_block_last_caller = ''

user_1_accept_last_caller = ''

user_1_speed_dial_2 = ''

user_1_speed_dial_3 = ''

user_1_speed_dial_4 = ''

user_1_speed_dial_5 = ''

user_1_speed_dial_6 = ''

user_1_speed_dial_7 = ''

user_1_speed_dial_8 = ''

user_1_speed_dial_9 = ''

# possible values: 'yes', 'no'
user_1_cw_setting = 'yes'

# possible values: 'yes', 'no'
user_1_block_cid_setting = 'no'

# possible values: 'yes', 'no'
user_1_block_anc_setting = 'no'

# possible values: 'yes', 'no'
user_1_dnd_setting = 'no'

# possible values: 'yes', 'no'
user_1_cid_setting = 'yes'

# possible values: 'yes', 'no'
user_1_cwcid_setting = 'yes'

# possible values: 'yes', 'no'
user_1_dist_ring_setting = 'yes'

# possible values: 'yes', 'no'
user_1_secure_call_setting = 'no'

# possible values: 'yes', 'no'
user_1_message_waiting = 'no'

user_1_ring1_caller = ''

user_1_ring2_caller = ''

user_1_ring3_caller = ''

user_1_ring4_caller = ''

user_1_ring5_caller = ''

user_1_ring6_caller = ''

user_1_ring7_caller = ''

user_1_ring8_caller = ''

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_1_default_ring = '1'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_1_default_cwt = '1'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8', 'none'
user_1_hold_reminder_ring = '8'

# possible values: '1', '2', '3', '4', '5', '6', '7', '8'
user_1_call_back_ring = '7'

user_1_cfwd_ring_splash_len = '0'

user_1_cblk_ring_splash_len = '0'

user_1_vmwi_ring_splash_len = '0'

# possible values: 'New VM Available', 'New VM Becomes Available',
'New VM Arrives'
user_1_vmwi_ring_policy = 'New VM Available'

# possible values: 'yes', 'no'
user_1_ring_on_no_new_vm = 'no'


#
# line_1
#

# possible values: 'yes', 'no'
line_1_line_enable = 'yes'

# possible values: 'yes', 'no'
line_1_sas_enable = 'no'

line_1_sas_dlg_refresh_intvl = '30'

line_1_sas_inbound_rtp_sink = ''

# possible values: 'yes', 'no'
line_1_nat_mapping_enable = 'no'

# possible values: 'yes', 'no'
line_1_nat_keep_alive_enable = 'no'

line_1_nat_keep_alive_msg = '$NOTIFY'

line_1_nat_keep_alive_dest = '$PROXY'

line_1_sip_tos_diffserv_value = '0x68'

# possible values: 'low', 'medium', 'high', 'very high', 'extremely
high'
line_1_network_jitter_level = 'high'

line_1_rtp_tos_diffserv_value = '0xb8'

# possible values: 'up and down', 'up only', 'down only', 'disable'
line_1_jitter_buffer_adjustment = 'up and down'

line_1_sip_port = '5060'

# possible values: 'yes', 'no'
line_1_sip_100rel_enable = 'no'

line_1_ext_sip_port = ''

# possible values: 'yes', 'no'
line_1_auth_resync_reboot = 'yes'

line_1_sip_proxy_require = ''

# possible values: 'yes', 'no'
line_1_sip_remote_party_id = 'no'

# possible values: 'yes', 'no'
line_1_sip_guid = 'no'

# possible values: 'none', '1-line', '1-line excl. OPT', '1-line excl.
NTFY', '1-line excl. REG', '1-line excl. OPT|NTFY|REG', 'full', 'full
excl. OPT', 'full excl. NTFY', 'full excl. REG', 'full excl.
OPT|NTFY|REG'
line_1_sip_debug_option = 'none'

line_1_rtp_log_intvl = '0'

# possible values: 'yes', 'no'
line_1_restrict_source_ip = 'no'

line_1_referor_bye_delay = '4'

line_1_refer_target_bye_delay = '0'

line_1_referee_bye_delay = '0'

# possible values: 'yes', 'no'
line_1_refer_to_target_contact = 'no'

# possible values: 'yes', 'no'
line_1_sticky_183 = 'no'

# possible values: 'yes', 'no'
line_1_blind_attn_xfer_enable = 'no'

line_1_moh_server = ''

# possible values: 'yes', 'no'
line_1_xfer_when_hangup_conf = 'yes'

line_1_conference_bridge_url = ''

# possible values: '3', '4', '5', '6', '7', '8', '9', '10'
line_1_conference_bridge_ports = '3'

line_1_proxy = 'sip.voipcheap.com'

# possible values: 'yes', 'no'
line_1_use_outbound_proxy = 'no'

line_1_outbound_proxy = ''

# possible values: 'yes', 'no'
line_1_use_ob_proxy_in_dialog = 'yes'

# possible values: 'yes', 'no'
line_1_register = 'yes'

# possible values: 'yes', 'no'
line_1_make_call_without_reg = 'no'

line_1_register_expires = '3600'

# possible values: 'yes', 'no'
line_1_ans_call_without_reg = 'no'

# possible values: 'yes', 'no'
line_1_use_dns_srv = 'no'

# possible values: 'yes', 'no'
line_1_dns_srv_auto_prefix = 'no'

line_1_proxy_fallback_intvl = '3600'

# possible values: 'Normal', 'Based on SRV Port'
line_1_proxy_redundancy_method = 'Normal'

line_1_voice_mail_server = ''

line_1_display_name = ''

line_1_user_id = 'hanasi'

line_1_password = '*************'

# possible values: 'yes', 'no'
line_1_use_auth_id = 'no'

line_1_auth_id = ''

line_1_mini_certificate = ''

line_1_srtp_private_key = ''

# possible values: 'yes', 'no'
line_1_call_waiting_serv = 'yes'

# possible values: 'yes', 'no'
line_1_block_cid_serv = 'yes'

# possible values: 'yes', 'no'
line_1_block_anc_serv = 'yes'

# possible values: 'yes', 'no'
line_1_dist_ring_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cfwd_all_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cfwd_busy_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cfwd_no_ans_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cfwd_sel_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cfwd_last_serv = 'yes'

# possible values: 'yes', 'no'
line_1_block_last_serv = 'yes'

# possible values: 'yes', 'no'
line_1_accept_last_serv = 'yes'

# possible values: 'yes', 'no'
line_1_dnd_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cid_serv = 'yes'

# possible values: 'yes', 'no'
line_1_cwcid_serv = 'yes'

# possible values: 'yes', 'no'
line_1_call_return_serv = 'yes'

# possible values: 'yes', 'no'
line_1_call_back_serv = 'yes'

# possible values: 'yes', 'no'
line_1_three_way_call_serv = 'yes'

# possible values: 'yes', 'no'
line_1_three_way_conf_serv = 'yes'

# possible values: 'yes', 'no'
line_1_attn_transfer_serv = 'yes'

# possible values: 'yes', 'no'
line_1_unattn_transfer_serv = 'yes'

# possible values: 'yes', 'no'
line_1_mwi_serv = 'yes'

# possible values: 'yes', 'no'
line_1_vmwi_serv = 'yes'

# possible values: 'yes', 'no'
line_1_speed_dial_serv = 'yes'

# possible values: 'yes', 'no'
line_1_secure_call_serv = 'yes'

# possible values: 'yes', 'no'
line_1_referral_serv = 'yes'

# possible values: 'yes', 'no'
line_1_feature_dial_serv = 'yes'

# possible values: 'yes', 'no'
line_1_service_announcement_serv = 'no'

# possible values: 'G711u', 'G711a', 'G726-16', 'G726-24', 'G726-32',
'G726-40', 'G729a', 'G723'
line_1_preferred_codec = 'G711u'

# possible values: 'yes', 'no'
line_1_silence_supp_enable = 'no'

# possible values: 'yes', 'no'
line_1_use_pref_codec_only = 'no'

# possible values: 'high', 'medium', 'low'
line_1_silence_threshold = 'medium'

# possible values: 'yes', 'no'
line_1_g729a_enable = 'yes'

# possible values: 'yes', 'no'
line_1_echo_canc_enable = 'yes'

# possible values: 'yes', 'no'
line_1_g723_enable = 'yes'

# possible values: 'yes', 'no'
line_1_echo_canc_adapt_enable = 'yes'

# possible values: 'yes', 'no'
line_1_g726_16_enable = 'yes'

# possible values: 'yes', 'no'
line_1_echo_supp_enable = 'yes'

# possible values: 'yes', 'no'
line_1_g726_24_enable = 'yes'

# possible values: 'yes', 'no'
line_1_fax_ced_detect_enable = 'yes'

# possible values: 'yes', 'no'
line_1_g726_32_enable = 'yes'

# possible values: 'yes', 'no'
line_1_fax_cng_detect_enable = 'yes'

# possible values: 'yes', 'no'
line_1_g726_40_enable = 'yes'

# possible values: 'G711u', 'G711a'
line_1_fax_passthru_codec = 'G711u'

# possible values: 'yes', 'no'
line_1_fax_codec_symmetric = 'yes'

# possible values: 'None', 'NSE', 'ReINVITE'
line_1_fax_passthru_method = 'NSE'

# possible values: 'InBand', 'AVT', 'INFO', 'Auto'
line_1_dtmf_tx_method = 'Auto'

# possible values: 'yes', 'no'
line_1_fax_process_nse = 'yes'

# possible values: 'None', 'AVT', 'INFO'
line_1_hook_flash_tx_method = 'None'

# possible values: 'yes', 'no'
line_1_fax_disable_ecan = 'no'

# possible values: 'yes', 'no'
line_1_release_unused_codec = 'yes'

line_1_dial_plan =
'(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)'

# possible values: 'yes', 'no'
line_1_enable_ip_dialing = 'no'

line_1_emergency_number = ''

# possible values: 'Forward', 'Reverse'
line_1_idle_polarity = 'Forward'

# possible values: 'Forward', 'Reverse'
line_1_caller_conn_polarity = 'Forward'

# possible values: 'Forward', 'Reverse'
line_1_callee_conn_polarity = 'Forward'


#
# line_2
#

# possible values: 'yes', 'no'
line_2_line_enable = 'no'

# possible values: 'yes', 'no'
line_2_sas_enable = 'no'

line_2_sas_dlg_refresh_intvl = '30'

line_2_sas_inbound_rtp_sink = ''

# possible values: 'yes', 'no'
line_2_nat_mapping_enable = 'no'

# possible values: 'yes', 'no'
line_2_nat_keep_alive_enable = 'no'

line_2_nat_keep_alive_msg = '$NOTIFY'

line_2_nat_keep_alive_dest = '$PROXY'

line_2_sip_tos_diffserv_value = '0x68'

# possible values: 'low', 'medium', 'high', 'very high', 'extremely
high'
line_2_network_jitter_level = 'high'

line_2_rtp_tos_diffserv_value = '0xb8'

# possible values: 'up and down', 'up only', 'down only', 'disable'
line_2_jitter_buffer_adjustment = 'up and down'

line_2_sip_port = '5061'

# possible values: 'yes', 'no'
line_2_sip_100rel_enable = 'no'

line_2_ext_sip_port = ''

# possible values: 'yes', 'no'
line_2_auth_resync_reboot = 'yes'

line_2_sip_proxy_require = ''

# possible values: 'yes', 'no'
line_2_sip_remote_party_id = 'no'

# possible values: 'yes', 'no'
line_2_sip_guid = 'no'

# possible values: 'none', '1-line', '1-line excl. OPT', '1-line excl.
NTFY', '1-line excl. REG', '1-line excl. OPT|NTFY|REG', 'full', 'full
excl. OPT', 'full excl. NTFY', 'full excl. REG', 'full excl.
OPT|NTFY|REG'
line_2_sip_debug_option = 'none'

line_2_rtp_log_intvl = '0'

# possible values: 'yes', 'no'
line_2_restrict_source_ip = 'no'

line_2_referor_bye_delay = '4'

line_2_refer_target_bye_delay = '0'

line_2_referee_bye_delay = '0'

# possible values: 'yes', 'no'
line_2_refer_to_target_contact = 'no'

# possible values: 'yes', 'no'
line_2_sticky_183 = 'no'

# possible values: 'yes', 'no'
line_2_blind_attn_xfer_enable = 'no'

line_2_moh_server = ''

# possible values: 'yes', 'no'
line_2_xfer_when_hangup_conf = 'yes'

line_2_conference_bridge_url = ''

# possible values: '3', '4', '5', '6', '7', '8', '9', '10'
line_2_conference_bridge_ports = '3'

line_2_proxy = ''

# possible values: 'yes', 'no'
line_2_use_outbound_proxy = 'no'

line_2_outbound_proxy = ''

# possible values: 'yes', 'no'
line_2_use_ob_proxy_in_dialog = 'yes'

# possible values: 'yes', 'no'
line_2_register = 'yes'

# possible values: 'yes', 'no'
line_2_make_call_without_reg = 'no'

line_2_register_expires = '3600'

# possible values: 'yes', 'no'
line_2_ans_call_without_reg = 'no'

# possible values: 'yes', 'no'
line_2_use_dns_srv = 'no'

# possible values: 'yes', 'no'
line_2_dns_srv_auto_prefix = 'no'

line_2_proxy_fallback_intvl = '3600'

# possible values: 'Normal', 'Based on SRV Port'
line_2_proxy_redundancy_method = 'Normal'

line_2_voice_mail_server = ''

line_2_display_name = ''

line_2_user_id = ''

line_2_password = ''

# possible values: 'yes', 'no'
line_2_use_auth_id = 'no'

line_2_auth_id = ''

line_2_mini_certificate = ''

line_2_srtp_private_key = ''

# possible values: 'yes', 'no'
line_2_call_waiting_serv = 'yes'

# possible values: 'yes', 'no'
line_2_block_cid_serv = 'yes'

# possible values: 'yes', 'no'
line_2_block_anc_serv = 'yes'

# possible values: 'yes', 'no'
line_2_dist_ring_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cfwd_all_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cfwd_busy_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cfwd_no_ans_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cfwd_sel_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cfwd_last_serv = 'yes'

# possible values: 'yes', 'no'
line_2_block_last_serv = 'yes'

# possible values: 'yes', 'no'
line_2_accept_last_serv = 'yes'

# possible values: 'yes', 'no'
line_2_dnd_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cid_serv = 'yes'

# possible values: 'yes', 'no'
line_2_cwcid_serv = 'yes'

# possible values: 'yes', 'no'
line_2_call_return_serv = 'yes'

# possible values: 'yes', 'no'
line_2_call_back_serv = 'yes'

# possible values: 'yes', 'no'
line_2_three_way_call_serv = 'yes'

# possible values: 'yes', 'no'
line_2_three_way_conf_serv = 'yes'

# possible values: 'yes', 'no'
line_2_attn_transfer_serv = 'yes'

# possible values: 'yes', 'no'
line_2_unattn_transfer_serv = 'yes'

# possible values: 'yes', 'no'
line_2_mwi_serv = 'yes'

# possible values: 'yes', 'no'
line_2_vmwi_serv = 'yes'

# possible values: 'yes', 'no'
line_2_speed_dial_serv = 'yes'

# possible values: 'yes', 'no'
line_2_secure_call_serv = 'yes'

# possible values: 'yes', 'no'
line_2_referral_serv = 'yes'

# possible values: 'yes', 'no'
line_2_feature_dial_serv = 'yes'

# possible values: 'yes', 'no'
line_2_service_announcement_serv = 'no'

# possible values: 'G711u', 'G711a', 'G726-16', 'G726-24', 'G726-32',
'G726-40', 'G729a', 'G723'
line_2_preferred_codec = 'G711u'

# possible values: 'yes', 'no'
line_2_silence_supp_enable = 'no'

# possible values: 'yes', 'no'
line_2_use_pref_codec_only = 'no'

# possible values: 'high', 'medium', 'low'
line_2_silence_threshold = 'medium'

# possible values: 'yes', 'no'
line_2_g729a_enable = 'yes'

# possible values: 'yes', 'no'
line_2_echo_canc_enable = 'yes'

# possible values: 'yes', 'no'
line_2_g723_enable = 'yes'

# possible values: 'yes', 'no'
line_2_echo_canc_adapt_enable = 'yes'

# possible values: 'yes', 'no'
line_2_g726_16_enable = 'yes'

# possible values: 'yes', 'no'
line_2_echo_supp_enable = 'yes'

# possible values: 'yes', 'no'
line_2_g726_24_enable = 'yes'

# possible values: 'yes', 'no'
line_2_fax_ced_detect_enable = 'yes'

# possible values: 'yes', 'no'
line_2_g726_32_enable = 'yes'

# possible values: 'yes', 'no'
line_2_fax_cng_detect_enable = 'yes'

# possible values: 'yes', 'no'
line_2_g726_40_enable = 'yes'

# possible values: 'G711u', 'G711a'
line_2_fax_passthru_codec = 'G711u'

# possible values: 'yes', 'no'
line_2_fax_codec_symmetric = 'yes'

# possible values: 'None', 'NSE', 'ReINVITE'
line_2_fax_passthru_method = 'NSE'

# possible values: 'InBand', 'AVT', 'INFO', 'Auto'
line_2_dtmf_tx_method = 'Auto'

# possible values: 'yes', 'no'
line_2_fax_process_nse = 'yes'

# possible values: 'None', 'AVT', 'INFO'
line_2_hook_flash_tx_method = 'None'

# possible values: 'yes', 'no'
line_2_fax_disable_ecan = 'no'

# possible values: 'yes', 'no'
line_2_release_unused_codec = 'yes'

line_2_dial_plan =
'(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)'

# possible values: 'yes', 'no'
line_2_enable_ip_dialing = 'no'

line_2_emergency_number = ''

# possible values: 'Forward', 'Reverse'
line_2_idle_polarity = 'Forward'

# possible values: 'Forward', 'Reverse'
line_2_caller_conn_polarity = 'Forward'

# possible values: 'Forward', 'Reverse'
line_2_callee_conn_polarity = 'Forward'
*****end
 
Reply With Quote
 
 
 
 
Brian
Guest
Posts: n/a
 
      12-10-2006
On 2006-12-10, Stan <(E-Mail Removed)> wrote:

> Here is the printout. I had considered ZIPping it, but decided that
> 30K is not enormous, and it is more convenient for readers that it is
> not compressed. I will be grateful for any and all pertinent comments.


> system_primary_dns = ''
>
> system_secondary_dns = ''


This is why you are not registering. The device cannot find the IP for
sip.voipcheap.com. At least one field must be completed,

Brian.
 
Reply With Quote
 
 
 
 
{{{{{Welcome}}}}}
Guest
Posts: n/a
 
      12-10-2006
Thus spaketh Stan:
> On Sun, 10 Dec 2006 00:25:01 UTC, "Graham" <(E-Mail Removed)> opined:
>>
>>>
>>> There are options such as <Caller ID method> which must depend on
>>> the standards of the local telco, and that I must consult with them
>>> for answers (I do not want to bet on my chances of getting such
>>> information). If someone knows about a source that defines these
>>> parameters for various countries, I hope he will offer a pointer to
>>> it.

>>
>> No. The PAP2 *is* the telco, (in that it simulates an exchange line).
>> The CLID settings simply have to match the telephones you are
>> connecting to the FXS ports. For UK phones this is
>> ETSI FSK with PR.

>
> No, I meant the TELCO. I am not in the UK, and I do not know what
> settings the company uses, thus I have no clue what settings are
> required for the telephone instruments offered for sale. But a little
> experimentation will discover what the phones want.



Which country are you in, and which country are your phones designed to
work in?

With that info we can tell you which settings you need.


--
60 day free DVD rental: www.southeastbirmingham.co.uk/dvd
Mobile Offers: www.southeastbirmingham.co.uk/payg
Items for sale: www.dodgy-dealer.co.uk

 
Reply With Quote
 
Graham
Guest
Posts: n/a
 
      12-10-2006

"Stan" <(E-Mail Removed)> wrote in message
news:uViCr8LlbtmJ-pn2-GuJcxdPeK0eh@poblano...
> On Sun, 10 Dec 2006 00:25:01 UTC, "Graham" <(E-Mail Removed)> opined:
>>
>> >
>> > There are options such as <Caller ID method> which must depend on the
>> > standards of the local telco, and that I must consult with them for
>> > answers (I do not want to bet on my chances of getting such
>> > information). If someone knows about a source that defines these
>> > parameters for various countries, I hope he will offer a pointer to
>> > it.

>>
>> No. The PAP2 *is* the telco, (in that it simulates an exchange line).
>> The CLID settings simply have to match the telephones you are
>> connecting to the FXS ports. For UK phones this is
>> ETSI FSK with PR.

>
> No, I meant the TELCO. I am not in the UK, and I do not know what
> settings the company uses, thus I have no clue what settings are
> required for the telephone instruments offered for sale. But a little
> experimentation will discover what the phones want.


You are in Israel aren't you?
If your phones were destined for the local market, or the USA,
then you need to select Bellcore.

--

Graham.
%Profound_observation%


 
Reply With Quote
 
Stan
Guest
Posts: n/a
 
      12-10-2006
On Sun, 10 Dec 2006 09:51:55 UTC, Brian <(E-Mail Removed)> opined:
> On 2006-12-10, Stan <(E-Mail Removed)> wrote:
>
> > Here is the printout. I had considered ZIPping it, but decided that
> > 30K is not enormous, and it is more convenient for readers that it is
> > not compressed. I will be grateful for any and all pertinent comments.

>
> > system_primary_dns = ''
> >
> > system_secondary_dns = ''

>
> This is why you are not registering. The device cannot find the IP for
> sip.voipcheap.com. At least one field must be completed,


AHA2! This wants the DNS that I use for every other purpose on the
'Net. Well, that's certainly easy enough to do.

 
Reply With Quote
 
Stan
Guest
Posts: n/a
 
      12-10-2006
On Sun, 10 Dec 2006 09:51:55 UTC, Brian <(E-Mail Removed)> opined:
> On 2006-12-10, Stan <(E-Mail Removed)> wrote:
>
> > Here is the printout. I had considered ZIPping it, but decided that
> > 30K is not enormous, and it is more convenient for readers that it is
> > not compressed. I will be grateful for any and all pertinent comments.

>
> > system_primary_dns = ''
> >
> > system_secondary_dns = ''

>
> This is why you are not registering. The device cannot find the IP for
> sip.voipcheap.com. At least one field must be completed,
>
> Brian.


That did the trick. The logic of why this is necessary is completely
clear to me. I am sure would have spotted it myself had it not been
buried in a mass of cryptic terminology, but I should have anyway, and
the fact is that I didn't. Thank you, gentlemen, for your assistance.
You have saved me gobs of time and much frustration.

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PAP2 configuration Rich UK VOIP 14 05-20-2007 06:46 PM
Voipcheap.co.uk -> "Sorry - VoipCheap temporarily unavailable" News Reader UK VOIP 0 11-26-2006 07:27 AM
voipcheap.com and voipcheap.co.uk - comparison Paul UK VOIP 2 09-04-2006 12:58 PM
Help saving PAP2 configuration settings Joe UK VOIP 6 10-26-2005 12:21 PM
PAP2 and Sipura 3000 and the * key Sparks UK VOIP 1 10-20-2005 12:15 PM



Advertisments