Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco 1700 router port forwarding

Reply
Thread Tools

Cisco 1700 router port forwarding

 
 
John
Guest
Posts: n/a
 
      05-11-2005
Does someone know how can i open 1 TCP port from my router to 1
computer that is connected to it?

 
Reply With Quote
 
 
 
 
Steve Richter
Guest
Posts: n/a
 
      05-11-2005

John wrote:
> Does someone know how can i open 1 TCP port from my router to 1
> computer that is connected to it?


some good documents on the subject:
http://www.chinalinuxpub.com/doc/www...dsl-router.htm

http://www.portforward.com/cisco/678.htm

and here are the notes I have put together so far:

================== to access the router =======================
access via a telnet session:
telnet 10.10.10.1

access via service port console:
connect the service port cable to com1 of windows PC
programs - accessories - communications - hyper terminal
set speed to 9600
press enter - get router prompt

================ privledged and configure mode ==================
( from the router prompt. either in telnet or console session. )
enable // enters privledged mode
configure terminal // enters configure mode
use ctrl-z to exit config mode

=================== commands =============================
enable // enter privlidged mode
configure terminal // configure mode.
show interface
show ip nat translation

=================== debug commands ===========================
enable
term mon
debug ip nat detailed

 
Reply With Quote
 
 
 
 
Flatch U. Lance
Guest
Posts: n/a
 
      05-12-2005

"John" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> Does someone know how can i open 1 TCP port from my router to 1
> computer that is connected to it?
>


Config t..............ip nat inside source static tcp <static ip of
computer> <port number> interface <Dialer1 or whatever> <port number>


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to configure port forwarding for a Cisco 2600 series router? CompGuy Cisco 11 09-28-2011 05:34 PM
A non-Cisco router, BDCOM 1700 Router Series WNasri@gmail.com Cisco 0 06-28-2008 08:27 AM
Router Port forwarding/port triggering WHAT DO THEY DO? ToyalP2 Computer Support 7 01-07-2008 08:08 AM
CISCO 1700 and Port 2000 masoftheund Cisco 0 01-12-2007 10:29 AM
Need to map a port on a 1700 router Kirk Goins Cisco 1 09-13-2004 09:22 AM



Advertisments