Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > VPD usage after upgrading PIX 506E

Reply
Thread Tools

VPD usage after upgrading PIX 506E

 
 
jaisol
Guest
Posts: n/a
 
      05-07-2005
Before to upgrade Firewall version and PDM I was using VPN perfectly.
Once upgraded I can connect with VPN.

Show ver before upgrade:

Cisco PIX Firewall Version 6.1(2)
Cisco PIX Device Manager Version 1.1(2)
Compiled on Fri 16-Nov-01 14:28 by morlee
Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
Flash E28F640J3 @ 0x300, 8MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0009.b718.b578, irq 10
1: ethernet1: address is 0009.b718.b579, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 2
Cut-through Proxy: Enabled
Guards: Enabled
Websense: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
ISAKMP peers: Unlimited

Show ver after upgrade:

Cisco PIX Firewall Version 6.3(4)
Cisco PIX Device Manager Version 3.0(2)
Compiled on Fri 02-Jul-04 00:07 by morlee
pixfirewall up 1 day 23 hours
Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
Flash E28F640J3 @ 0x300, 8MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0009.b718.b578, irq 10
1: ethernet1: address is 0009.b718.b579, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 2
Maximum Interfaces: 2
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited

After upgrade I don't have change configuration.

How can I resolve it?

THANKS!

 
Reply With Quote
 
 
 
 
Chris
Guest
Posts: n/a
 
      05-07-2005

"jaisol" <> wrote in message
news: oups.com...
> Before to upgrade Firewall version and PDM I was using VPN perfectly.
> Once upgraded I can connect with VPN.
>
> Show ver before upgrade:
>
> Cisco PIX Firewall Version 6.1(2)
> Cisco PIX Device Manager Version 1.1(2)
> Compiled on Fri 16-Nov-01 14:28 by morlee
> Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
> Flash E28F640J3 @ 0x300, 8MB
> BIOS Flash AM29F400B @ 0xfffd8000, 32KB
> 0: ethernet0: address is 0009.b718.b578, irq 10
> 1: ethernet1: address is 0009.b718.b579, irq 11
> Licensed Features:
> Failover: Disabled
> VPN-DES: Enabled
> VPN-3DES: Disabled
> Maximum Interfaces: 2
> Cut-through Proxy: Enabled
> Guards: Enabled
> Websense: Enabled
> Inside Hosts: Unlimited
> Throughput: Unlimited
> ISAKMP peers: Unlimited
>
> Show ver after upgrade:
>
> Cisco PIX Firewall Version 6.3(4)
> Cisco PIX Device Manager Version 3.0(2)
> Compiled on Fri 02-Jul-04 00:07 by morlee
> pixfirewall up 1 day 23 hours
> Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
> Flash E28F640J3 @ 0x300, 8MB
> BIOS Flash AM29F400B @ 0xfffd8000, 32KB
> 0: ethernet0: address is 0009.b718.b578, irq 10
> 1: ethernet1: address is 0009.b718.b579, irq 11
> Licensed Features:
> Failover: Disabled
> VPN-DES: Enabled
> VPN-3DES-AES: Disabled
> Maximum Physical Interfaces: 2
> Maximum Interfaces: 2
> Cut-through Proxy: Enabled
> Guards: Enabled
> URL-filtering: Enabled
> Inside Hosts: Unlimited
> Throughput: Unlimited
> IKE peers: Unlimited
>
> After upgrade I don't have change configuration.
>
> How can I resolve it?
>
> THANKS!
>


Resolve what?


 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      05-07-2005
In article <>, Chris <chris@nospam> wrote:

:"jaisol" <> wrote in message
:news: roups.com...
:> Before to upgrade Firewall version and PDM I was using VPN perfectly.
:> Once upgraded I can connect with VPN.

:> How can I resolve it?

:Resolve what?

That was pretty much what I was asking myself about the posting


I'll take a shot in the dark:
The OP does not have the 3DES license, so s/he must be using DES
encryption for the VPN. Somewhere between 6.1 and 6.3, support
was dropped for the combination of DES and SHA, so the OP may need
to change transform sets to esp-des esp-md5-hmac
--
Studies show that the average reader ignores 106% of all statistics
they see in .signatures.
 
Reply With Quote
 
Chris
Guest
Posts: n/a
 
      05-08-2005

> That was pretty much what I was asking myself about the posting
>
>
> I'll take a shot in the dark:
> The OP does not have the 3DES license, so s/he must be using DES
> encryption for the VPN. Somewhere between 6.1 and 6.3, support
> was dropped for the combination of DES and SHA, so the OP may need
> to change transform sets to esp-des esp-md5-hmac
> --
> Studies show that the average reader ignores 106% of all statistics
> they see in .signatures.


"Once upgraded I can connect with VPN"

That's good then


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Upgrading a PIX 506E past 32MB Mike Cisco 3 07-01-2007 01:29 PM
Upgrading Memory on PIX 506E Jerry Gardner Cisco 0 11-19-2005 01:00 AM
After upgrading PIX 506E don't resolve VPN connection jaisol Cisco 3 05-13-2005 08:52 AM
VPN usage after upgrading PIX 506E jaisol Cisco 0 05-07-2005 05:32 PM
Upgrading Firewall Version and PDM on PIX 506E (newbie user) jaisol Cisco 1 05-05-2005 02:33 AM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57