it's a lot easier if you just reset your wireless router to
default. clear settings of your wireless cards and restart
wireless zero configuration. in short, rebuild your WLAN
from scratch. once you're done it 2 or 3 times, it becomes
very easy.
>-----Original Message-----
>try a new user with admin rights
>sounds like a screwed profile
>
>mike
>
>"Wayne Boxall" <> wrote in message
>news:...
>> A real weird thing (read VERY frustrating!) happened the
other day. I can
>no
>> longer get an IP address from my wireless router on my
IBM Thinkpad T40p.
>I
>> can get an
>> address two other ways:
>>
>> 1) Set a fixed IP address.
>> 2) And this is weird. Plug in a wired link to the router
and then I get an
>> IP address for the wired card and the wireless card.
>>
>> On my T40 (not t40p) it connects flawlessly everytime.
>>
>> I have the latest IBM Access Conn and Wireless drivers.
I have tried it
>with
>> and
>> without wireless Zero Config. The only thing I can thing
that has changed
>is
>> that I tried to configure the bluetooth card.
>>
>> I have also tried system restore and had no luck getting
it to work.
>>
>> The error message from Access Connections:
>> -------------------------------------------------------
>> Connection Status: Disconnected
>> Cause: Authentication Failed.
>> Error Code: 304
>> Recommended Action: Authentication to the wireless
network specified in
>> this profile failed. Contact your network administrator.
>>
>> If the problem persists, contact your network
administrator and provide
>the
>> troubleshooting information below.
>> ---------------------------------------------
>> I have tried it with and without WEP and it makes no
difference. The error
>> above is simply wrong.
>>
>>
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.708 / Virus Database: 464 - Release Date:
19/06/2004
>
>
>.
>
Similar Threads
