«

1. I hav estarted DHCP debug command. This is outcome:
Writing dhcp_router
Feb 5 16:47:06.647: %DHCPD-3-WRITE_ERROR: DHCP could not write bindings
to ftp://dhcp:dhcp@192.168.0.11/dhcp_router.
Why do I recive this mesage? FTP is on and running!

2. How to put in a pool a subnetwork 192.168.0.128 /25? I have tryed
with command "network 192.168.0.128 /25" but then no computer in network
recives IP address. If I put command "network 192.168.0.0 /24" then it
starts giving IP address from 1.
Must I put in the pool whole network (network 192.168.0.0 /24) and then
exclude address from 1-127? I would like to do it with subnetworks.

Thanks!


--
Tomislav Parcina

Hi,

Start the DHCP service by
config# service dhcp
ip dhcp pool 1
network 192.168.0.128 255.255.255.252


ps. What is the status of your ethernet interface ?


regards, Glenn

Tomislav Parcina wrote:
> 1. I hav estarted DHCP debug command. This is outcome:
> Writing dhcp_router
> Feb 5 16:47:06.647: %DHCPD-3-WRITE_ERROR: DHCP could not write
bindings
> to ftp://dhcp:dhcp@192.168.0.11/dhcp_router.
> Why do I recive this mesage? FTP is on and running!
>
> 2. How to put in a pool a subnetwork 192.168.0.128 /25? I have tryed
> with command "network 192.168.0.128 /25" but then no computer in
network
> recives IP address. If I put command "network 192.168.0.0 /24" then
it
> starts giving IP address from 1.
> Must I put in the pool whole network (network 192.168.0.0 /24) and
then
> exclude address from 1-127? I would like to do it with subnetworks.
>
> Thanks!
>
>
> --
> Tomislav Parcina
>