Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco ISDN to Windows RAS ISDN

Reply
Thread Tools

Cisco ISDN to Windows RAS ISDN

 
 
SkY
Guest
Posts: n/a
 
      03-31-2005
Hey all

I've been trying to set up my 3660 router to use 8-port ISDN BR
interface card to dialout to external ISDN which has Windows 2000 RA
dialin servers. So, when i try to dial from Windows computers wi
dial-up, Cisco BRI answers correctly, and connection is established
When I try reverse, Cisco to dial via BRI, connection fails t
establish. These are my settings, so can anyone tell me please, i
this type of connection is doable, and if it is, what's wrong with m
setup

I try to connect to remote network by simple pinging of hos
172.16.200.

Thanx a bunch

Cisco setup


interface BRI3/
no ip addres
encapsulation pp
logging event nfas-statu
dialer pool-member
isdn switch-type basic-net
no cdp enabl

interface Dialer20
description tes
ip address negotiate
encapsulation pp
dialer pool
dialer idle-timeout 6
dialer string xxxxxxxxxx
dialer-group
no peer default ip addres
ppp pap sent-username xXxXxXxXx password 0 xXxXxXxX

ip route 172.16.200.0 255.255.255.0 Dialer20

dialer-list 1 protocol ip permi

Then,

I've turned on debugging on Cisco, so I can see what's going on

debug ppp negotiatio
debug ppp authenticatio
debug ppp erro
terminal monito

And, this is what I get

*Mar 30 07:15:31: %ISDN-6-LAYER2UP: Layer 2 for Interface BR3/0, TE
88 changed to up
*Mar 30 17:15:32: %LINK-3-UPDOWN: Interface BRI3/0:1, changed stat
to up
*Mar 30 17:15:32: %DIALER-6-BIND: Interface BR3/0:1 bound to profil
Di200
*Mar 30 17:15:34: %ISDN-6-CONNECT: Interface BRI3/0:1 is no
connected to 3076962 3c86.2052.4153
*Mar 30 17:15:34: %ISDN-6-DISCONNECT: Interface BRI3/0:1
disconnected from 3076962 3c86.2052.4153, call lasted 2 seconds
*Mar 30 17:15:35: %LINK-3-UPDOWN: Interface BRI3/0:1, changed stat
to down
*Mar 30 17:15:35: %DIALER-6-UNBIND: Interface BR3/0:1 unbound fro
profile Di200
*Mar 30 17:15:37: %LINK-3-UPDOWN: Interface BRI3/0:1, changed stat
to up
*Mar 30 17:15:37: %DIALER-6-BIND: Interface BR3/0:1 bound to profil
Di200
*Mar 30 17:15:39: %ISDN-6-CONNECT: Interface BRI3/0:1 is no
connected to 3076962 3c86.2052.4153
*Mar 30 17:15:39: %ISDN-6-DISCONNECT: Interface BRI3/0:1
disconnected from 3076962 3c86.2052.4153, call lasted 2 seconds
*Mar 30 17:15:39: %LINK-3-UPDOWN: Interface BRI3/0:1, changed stat
to down
*Mar 30 17:15:39: %DIALER-6-UNBIND: Interface BR3/0:1 unbound fro
profile Di200
*Mar 30 17:15:41: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR3/0
TEI 88 changed to dow

And that's it. As for the Windows machine, RAS doesn't even recogniz
the User/pass negotiation..

Thanks fotr your time :

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
CISCO 804 & ISDN PPP connect ISDN PMP BE749309 Cisco 0 06-09-2010 03:20 PM
pc with isdn modem not connecte isdn 1841 router with isdn module sync Cisco 0 06-05-2007 10:10 AM
identify the isdn and ppp layer in RAS cdtsly@relayeur.com Cisco 0 06-19-2006 12:29 PM
ISDN-RAS-Router Tobias Cisco 0 06-07-2004 06:28 PM
Converting NT RAS to Windows 2000 RAS Anthony MCSA 0 12-18-2003 05:26 PM



Advertisments