Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Appletalk routing

Reply
Thread Tools

Appletalk routing

 
 
Bryan Irvine
Guest
Posts: n/a
 
      03-16-2005
I have a remote router that for some reason isn't broadcasting it's
appletalk zone. The remote Mac's do show that they are in that
particular routers zone, but that info never makes it over the network.
Other zones show up.

Any troubleshooting tips you can provide would be great. The only
appletalk routing I know is to make sure the numbers aren't the same on
any 2 routers.

It might be worth pointing out that this router *used* to work before
we moved that office (yup the whole office). Also worth pointing out
is that I do get RIP updates from that location, they are able to
browse the internet and get email etc etc, it's only appletalk.

Help!


--Bryan

 
Reply With Quote
 
 
 
 
Andrei Ivanov
Guest
Posts: n/a
 
      03-16-2005
Bryan Irvine <(E-Mail Removed)> wrote:
> I have a remote router that for some reason isn't broadcasting it's
> appletalk zone. The remote Mac's do show that they are in that
> particular routers zone, but that info never makes it over the network.


On the router in that remote office AT-related config may look like this:

hostname router-a
!
appletalk routing
appletalk route-redistribution
!
interface ethernet0
appletalk cable-range 1000-1100 1001.123
appletalk zone ATZoneName
!
interface serial0
appletalk cable-range 100-110 101.12
appletalk zone ATZoneName
!

On a local router zone/cable-range for serial connection should be
rather similar, and cable-range for local LAN should be different:

hostname router-b
!
appletalk routing
!
interface serial0
appletalk cable-range 100-110 101.234
appletalk zone ATZoneName
!
interface ethernet0
appletalk cable-range 2000-2100 2002.111
appletalk zone ATZoneName
!

Then use "sh apple route" commands to find out about AT network routes
on each side of serial link.

--
andrei
 
Reply With Quote
 
 
 
 
sparctacus@gmail.com
Guest
Posts: n/a
 
      03-17-2005
the only noticable difference was the lack of of appletalk
route-redistribution, and that my config uses multilink to wrap 2 T1's
into a single link.

here's my configs

MAIN ROUTER:

!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname kent
!
no logging console
enable secret 5 45lk34lkml3455m44
enable password 7 fsdf4m44mm4434
!
ip subnet-zero
!
!
ip name-server 64.1.201.134
ip name-server 64.1.201.135
!
multilink virtual-template 1
appletalk routing
appletalk route-redistribution
ipx routing 0008.21ed.af60
!
!
!
interface Loopback0
ip address 192.168.210.1 255.255.255.252
ipx network FEED1111
!
interface FastEthernet0/0
description Kent LAN
ip address 10.0.0.97 255.255.0.0
duplex auto
speed auto
appletalk cable-range 1010-1019 1016.79
appletalk zone Kent
ipx network 100 encapsulation SAP
no mop enabled
!
interface Serial0/0
description T1-1 MLP trunk to Bellevue
no ip address
encapsulation ppp
no fair-queue
ppp multilink
!
interface Serial0/1
description T1 to Mercer Island
ip address 192.168.210.5 255.255.255.252
appletalk cable-range 800-800 800.234
appletalk zone Wan MIR
no fair-queue
!
interface Serial0/2
description T1-2 MLP trunk to Bellevue
no ip address
encapsulation ppp
no fair-queue
ppp multilink
!
interface Serial0/3
description T1 to Port Angeles
ip address 192.168.210.9 255.255.255.252
appletalk cable-range 500-500 500.119
appletalk zone Wan PA
!
interface Virtual-Template1
ip unnumbered Loopback0
appletalk cable-range 600-600 600.5
appletalk zone Wan Kent
no appletalk route-cache
ipx ppp-client Loopback0
ppp multilink
!
router rip
version 2
redistribute connected
redistribute static
network 10.0.0.0
network 192.168.210.0
!
ip default-gateway 10.0.0.1
ip classless
ip route 0.0.0.0 0.0.0.0 10.0.0.1
ip route 192.168.98.0 255.255.255.0 Serial0/1
ip route 192.233.98.0 255.255.255.0 192.168.210.6
ip route 192.233.99.0 255.255.255.0 Serial0/3
no ip http server
no ip pim bidir-enable
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
!
!
!
snmp-server community kent RO
banner motd ^C
************************************************
** Authorized access only **
************************************************
^C
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password 7 034555G55G45
login
!
no scheduler allocate



And the router that doesn't seem to be working

REMOTE ROUTER:
Building configuration...

Current configuration : 1566 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Bellevue
!
enable secret 5 $45G5GG5G5GERG5G54RG545GD
enable password 7 453G545G45G4ERG
!
ip subnet-zero
!
!
ip name-server 64.1.201.134
ip name-server 64.1.201.135
!
multilink virtual-template 1
appletalk routing
ipx routing 0008.21ed.bb60
!
!
!
interface Loopback0
ip address 192.168.210.2 255.255.255.252
ipx network FEED1111
!
interface FastEthernet0/0
description Bellevue Lan
ip address 10.1.0.97 255.255.255.0
duplex auto
speed auto
appletalk cable-range 1020-1029 1025.201
appletalk zone Bellevue
ipx network FAB encapsulation SAP
!
interface Serial0/0
description T1-1 MLP trunk to Kent
no ip address
encapsulation ppp
no ip mroute-cache
no fair-queue
ppp multilink
!
interface Serial0/1
description T1-2 MLP trunk to Kent
no ip address
encapsulation ppp
no fair-queue
ppp multilink
!
interface Virtual-Template1
ip unnumbered Loopback0
appletalk cable-range 600-600 600.242
appletalk zone Wan Bellevue
no appletalk route-cache
ipx ppp-client Loopback0
ppp multilink
!
router rip
version 2
redistribute connected
network 10.0.0.0
network 192.168.210.0
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.0.0.97
no ip http server
no ip pim bidir-enable
!
!
!
!
snmp-server community bellevue RO
banner motd ^C
**********************************************
AUTHORIZED ACCESS ONLY !
**********************************************
^C
!
line con 0
line aux 0
line vty 0 4
password 7 G45G45G45G4G5
login
!
end

 
Reply With Quote
 
Hansang Bae
Guest
Posts: n/a
 
      03-17-2005
Bryan Irvine wrote:

> I have a remote router that for some reason isn't broadcasting it's
> appletalk zone. The remote Mac's do show that they are in that
> particular routers zone, but that info never makes it over the
> network. Other zones show up.
>
> Any troubleshooting tips you can provide would be great. The only
> appletalk routing I know is to make sure the numbers aren't the same
> on any 2 routers.
>
> It might be worth pointing out that this router used to work before
> we moved that office (yup the whole office). Also worth pointing out
> is that I do get RIP updates from that location, they are able to
> browse the internet and get email etc etc, it's only appletalk.



If an appletalk problem occurs after a move, the first thing you should
do is power down EVERY SINGLE appletalk devices INCLUDING print
servers.


--

hsb


"Somehow I imagined this experience would be more rewarding" Calvin
**************************ROT13 MY ADDRESS*************************
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
************************************************** ******************
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
AppleTalk Browsing yvanog Cisco 0 09-20-2006 12:30 PM
appletalk network nini Cisco 4 10-13-2005 11:03 AM
1760 Router and Appletalk Jim O'Hagan Cisco 1 10-04-2004 04:59 AM
is it possible to route appletalk with catalyst ? Rick Cisco 2 03-02-2004 10:18 PM
ISO AppleTalk Routing basics help Jeff Mao Cisco 1 10-22-2003 03:05 PM



Advertisments