Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > GLBP group restriction when using a sup2 and 6500 switch

Reply
Thread Tools

GLBP group restriction when using a sup2 and 6500 switch

 
 
Tristan
Guest
Posts: n/a
 
      03-08-2005
http://www.cisco.com/warp/public/732...redundancy.pdf

The above article discusses a 1 GLBP group limitation for a 6500 switch
using a sup2.

It does mention that this single group can be reused on all VLANs.

If I have a VLAN interface with multiple IPs (which are gateways for
nodes), can I use GLBP?

Example:

interface VLAN 100
ip address 10.0.0.1 subnet 255.255.255.0
ip address 10.0.1.1 subnet 255.255.255.0 secondary
ip address 10.0.2.1 subnet 255.255.255.0 secondary

Can I use GLBP on this interface?

glbp 1 ip 10.0.0.2
glbp 1 ip 10.0.3.2 secondary
glbp 1 ip 10.0.2.2 secondary

Tristan

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
which MSFC install CEF entries under hybrid 6500(SUP2/MSFC2) Tao Liu Cisco 2 07-15-2007 09:58 AM
WS-X6516A-GBIC + Catalyst 6500 + Sup2 = Fibre Channel-Switching ? Mike D. Njoroge Cisco 0 03-08-2007 06:02 PM
Cisco 6500 + Sup1a or Sup2? Nicolaj Kamensek Cisco 4 01-03-2007 03:40 PM
Cat 6500 to Cat 6500 and VLANs Gary Cisco 2 12-02-2005 06:57 AM
Need Help With VLAN config on 6500 w/Sup2 Blade BitBucket Cisco 0 11-16-2003 06:12 PM



Advertisments