Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > routing issue

Reply
Thread Tools

routing issue

 
 
arell12
Guest
Posts: n/a
 
      11-21-2006
Head Office (192.168.0.0 /24 Lan -> Router -> Firewall) <--- IPSec
Tunnel ---> (Firewall <- Router <- Lan 192.168.1.0/24) Branch Office

This is how we have the our WAN set up. The traffic on our HO lan that
is for the BO goes to our router that has a static route pointing to
the HO Firewall and the traffic goes through the tunnel that is
configured on the firewall. This works fine. Problem is that we want
to add another network at the BO 192.168.2.0/24 and I want to route the
traffic there, can I just setup another IPsec Tunnel on my firewall to
do this? Can I have two IPsec tunnels going to the same external
address but different LAN networks? Is there a way that I can tell the
HO router to route the traffic for 192.168.2.0/24 through
192.168.1.0/24 ?

Thanks

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
intervlan routing and policy routing C3750 or C 4948 Sied@r Cisco 3 10-20-2005 08:42 PM
integrating new 3550 with routing into existing routing structure? joeblow Cisco 3 03-14-2005 08:50 AM
exchange routes between global IP routing table and VRF routing table zher Cisco 2 11-04-2004 11:28 PM
Re: Cisco routing issue Martin Gallagher Cisco 0 07-16-2003 02:33 PM
Re: Cisco routing issue Barry Margolin Cisco 0 07-16-2003 02:33 PM



Advertisments