«

We have about 20 Cisco 2950 switches, but we have just a few that the
switch itself on the management IP will stop responding to pings after
a few days of operation. A power cycle fixes it for a few days.

I'm not sure where to start debugging this. Any ideas?

Dave

In article < .com>, CTS-
says...
> We have about 20 Cisco 2950 switches, but we have just a few that the
> switch itself on the management IP will stop responding to pings after
> a few days of operation. A power cycle fixes it for a few days.
>
> I'm not sure where to start debugging this. Any ideas?
>

If I were you, I would probably first check BugTrackingTool for bugs in
images used on switches. If there's no match or workaround, I would open
a TAC case.


--
-Ivan.

*** Use Rot13 to see my eMail address ***