Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > module memory on 7600

Reply
Thread Tools

module memory on 7600

 
 
factbased
Guest
Posts: n/a
 
      10-26-2006
Anyone know how to tell how much memory a module on a 7600 has? In
particular I'm wondering about the ws-x6724-sfp (24 port sfp GigE) and
WS-X6748-GE-TX (48 port 10/100/1000 copper Ethernet). I don't see it in
"show ver", "show diagbus" or anywhere else in "show tech". There is a
diagnostic test for memory on a line card, but a "show diagnostic
result module 1 detail" command doesn't look like it would show the
memory size, only errors (and the test is rather disruptive). I did get
a look at the memory before installing the modules. One of them had
256MB printed on it, and that's what I wanted. The other one didn't
state its size explicitly, but the chips on it (8 + 1 for parity) did
have 256 in the middle of a string of numbers and letters, so I feel
fairly certain about that one. If someone knows a command to find this
information though, it would save me some driving to other sites.

Thanks!

 
Reply With Quote
 
 
 
 
www.BradReese.Com
Guest
Posts: n/a
 
      10-26-2006
You may wish to investigate:

Maintaining System Memory

http://www.cisco.com/en/US/products/...0800ca737.html

Hope this helps.

Brad Reese
BradReese.Com - Cisco Repair
http://www.bradreese.com/cisco-big-iron-repair.htm
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA & Canada: 877-549-2680
International: 828-277-7272
Fax: 775-254-3558
AIM: R2MGrant
BradReese.Com - Cisco Power Supply Headquarters
http://www.bradreese.com/cisco-power...-inventory.htm

 
Reply With Quote
 
 
 
 
brink
Guest
Posts: n/a
 
      10-27-2006

factbased wrote:
> Anyone know how to tell how much memory a module on a 7600 has?


same as always I'd say, like this ?

ServerSwitch#sho module
Mod Ports Card Type Model
Serial No.
--- ----- -------------------------------------- ------------------
-----------
........
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
.......

......

ServerSwitch#attach 3
Trying Switch ...
Entering CONSOLE for Switch
Type "^C^C^C" to end this session


ServerSwitch-cfc3#sho ver
Cisco Internetwork Operating System Software
IOS (tm) c6lc2 Software (c6lc2-SP-VM), Version 12.2(1SXF5, RELEASE
SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Sat 08-Jul-06 06:57 by kellythw
Image text-base: 0x01020150, data-base: 0x01021000

ROM: System Bootstrap, Version 12.2(14r)S5, RELEASE SOFTWARE (fc1)
BOOTLDR:
ServerMO uptime is 3 weeks, 3 days, 22 hours, 12 minutes
System returned to ROM by power-on
Running default software

cisco Catalyst 6000 (SB1121) processor with 245760K/16384K bytes of
memory.
Processor board ID SAL1033Y5V9
SB1121 Processor (Rev 32)
SB-1 CPU at 400Mhz, Implementation 1025, Rev 0.3
Last reset from power-on
X.25 software, Version 3.0.0.
123K bytes of non-volatile configuration memory.

Configuration register is 0x100

ServerSwitch-cfc3#

 
Reply With Quote
 
Thrill5
Guest
Posts: n/a
 
      11-01-2006

"factbased" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ps.com...
> Anyone know how to tell how much memory a module on a 7600 has? In
> particular I'm wondering about the ws-x6724-sfp (24 port sfp GigE) and
> WS-X6748-GE-TX (48 port 10/100/1000 copper Ethernet). I don't see it in
> "show ver", "show diagbus" or anywhere else in "show tech". There is a
> diagnostic test for memory on a line card, but a "show diagnostic
> result module 1 detail" command doesn't look like it would show the
> memory size, only errors (and the test is rather disruptive). I did get
> a look at the memory before installing the modules. One of them had
> 256MB printed on it, and that's what I wanted. The other one didn't
> state its size explicitly, but the chips on it (8 + 1 for parity) did
> have 256 in the middle of a string of numbers and letters, so I feel
> fairly certain about that one. If someone knows a command to find this
> information though, it would save me some driving to other sites.
>
> Thanks!
>


The memory on line cards is used for packet buffers. Check out the data
sheet for the card which will tell you how much memory each port has for
packet buffers.

Scott


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
6500/7600 Sup module performance specs linguafr Cisco 5 08-12-2008 07:58 PM
PPPoE Relay on 7600 through MPLS..... M Cisco 0 11-19-2005 07:02 PM
6500 or 7600 for MPLS Yannick CHAMPS Cisco 1 08-12-2004 06:55 AM
DSL aggregation on 7600 (MWAM) jhuys Cisco 0 07-20-2004 05:58 PM
7600 as VHG/PE (BRAS and MPLS TE) jhuys Cisco 0 07-01-2004 08:03 PM



Advertisments