Wireless Networking - Wntipcfg Shows Wireless Adapter Only

12-10-2006, 02:33 PM

Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it
(wireless disabled by switch on laptop), the drop down shows only my Intel
Wireless adapter and not the Realtek wired adapter, the latter which happens
to be my active connection.
When I turn on the aforementioned switch which enables the bluetooth and
wireless adapters, the drop down in Wntipcfg shows only the Bluetooth
adapter.

How can I fix this?

Thanks,

Phil

Phil C.

12-10-2006, 10:28 PM

There is a very small hardly visible scroll control
to select the adapter. Use it.
--PA

"Phil C." <> wrote in message news:...
> Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it (wireless disabled by switch on laptop), the drop down
> shows only my Intel Wireless adapter and not the Realtek wired adapter, the latter which happens to be my active connection.
> When I turn on the aforementioned switch which enables the bluetooth and wireless adapters, the drop down in Wntipcfg shows
> only the Bluetooth adapter.
>
> How can I fix this?
>
> Thanks,
>
> Phil
>

Pavel A.

12-11-2006, 02:25 AM

Hi
Like this, http://www.ezlan.net/example/ipconfig.jpg
Jack (MVP-Networking).

"Pavel A." <> wrote in message
news:...
> There is a very small hardly visible scroll control
> to select the adapter. Use it.
> --PA
>
> "Phil C." <> wrote in message
> news:...
>> Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it
>> (wireless disabled by switch on laptop), the drop down shows only my
>> Intel Wireless adapter and not the Realtek wired adapter, the latter
>> which happens to be my active connection.
>> When I turn on the aforementioned switch which enables the bluetooth and
>> wireless adapters, the drop down in Wntipcfg shows only the Bluetooth
>> adapter.
>>
>> How can I fix this?
>>
>> Thanks,
>>
>> Phil
>>
>
>

Jack \(MVP-Networking\).

12-11-2006, 02:10 PM

"Jack (MVP-Networking)." <> wrote in message news:%...
> Hi
> Like this, http://www.ezlan.net/example/ipconfig.jpg
> Jack (MVP-Networking).

Yes, exactly!
( there were few versions of winipcfg/wntipcfg around, with GUI slightly different )
Regards,
--PA

> "Pavel A." <> wrote in message news:...
>> There is a very small hardly visible scroll control
>> to select the adapter. Use it.
>> --PA
>>
>> "Phil C." <> wrote in message news:...
>>> Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it (wireless disabled by switch on laptop), the drop
>>> down shows only my Intel Wireless adapter and not the Realtek wired adapter, the latter which happens to be my active
>>> connection.
>>> When I turn on the aforementioned switch which enables the bluetooth and wireless adapters, the drop down in Wntipcfg shows
>>> only the Bluetooth adapter.
>>>
>>> How can I fix this?
>>>
>>> Thanks,
>>>
>>> Phil
>>>
>>
>>
>
>

Pavel A.

12-10-2006, 10:28 PM	#2
Pavel A. Posts: n/a	Re: Wntipcfg Shows Wireless Adapter Only There is a very small hardly visible scroll control to select the adapter. Use it. --PA "Phil C." <> wrote in message news:... > Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it (wireless disabled by switch on laptop), the drop down > shows only my Intel Wireless adapter and not the Realtek wired adapter, the latter which happens to be my active connection. > When I turn on the aforementioned switch which enables the bluetooth and wireless adapters, the drop down in Wntipcfg shows > only the Bluetooth adapter. > > How can I fix this? > > Thanks, > > Phil > Pavel A.

12-11-2006, 02:25 AM	#3
Jack \(MVP-Networking\). Posts: n/a	Re: Wntipcfg Shows Wireless Adapter Only Hi Like this, http://www.ezlan.net/example/ipconfig.jpg Jack (MVP-Networking). "Pavel A." <> wrote in message news:... > There is a very small hardly visible scroll control > to select the adapter. Use it. > --PA > > "Phil C." <> wrote in message > news:... >> Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it >> (wireless disabled by switch on laptop), the drop down shows only my >> Intel Wireless adapter and not the Realtek wired adapter, the latter >> which happens to be my active connection. >> When I turn on the aforementioned switch which enables the bluetooth and >> wireless adapters, the drop down in Wntipcfg shows only the Bluetooth >> adapter. >> >> How can I fix this? >> >> Thanks, >> >> Phil >> > > Jack \(MVP-Networking\).

12-11-2006, 02:10 PM	#4
Pavel A. Posts: n/a	Re: Wntipcfg Shows Wireless Adapter Only "Jack (MVP-Networking)." <> wrote in message news:%... > Hi > Like this, http://www.ezlan.net/example/ipconfig.jpg > Jack (MVP-Networking). Yes, exactly! ( there were few versions of winipcfg/wntipcfg around, with GUI slightly different ) Regards, --PA > "Pavel A." <> wrote in message news:... >> There is a very small hardly visible scroll control >> to select the adapter. Use it. >> --PA >> >> "Phil C." <> wrote in message news:... >>> Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it (wireless disabled by switch on laptop), the drop >>> down shows only my Intel Wireless adapter and not the Realtek wired adapter, the latter which happens to be my active >>> connection. >>> When I turn on the aforementioned switch which enables the bluetooth and wireless adapters, the drop down in Wntipcfg shows >>> only the Bluetooth adapter. >>> >>> How can I fix this? >>> >>> Thanks, >>> >>> Phil >>> >> >> > > Pavel A.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Atlona AT-HDAir Wireless USB HD Video Adapter	Admin	Front Page News	1	10-24-2009 06:01 PM
Help: Cant go wireless with usb 2.0 adapter	tucuxi	Hardware	0	07-31-2007 08:39 PM
Wireless Zero Configuration (WZC) will not release adapter	oliver_tiger	Software	0	09-20-2006 10:56 AM
Setting up a Network -- Wired or Wireless?	shopzero.net	DVD Video	1	07-24-2006 07:18 PM
Install Linksys wireless USB adapter	SilverSurfer	A+ Certification	12	07-12-2003 07:44 PM

12-10-2006, 02:33 PM	#1
	Wntipcfg Shows Wireless Adapter Only Hi. I just installed Wntipcfg to my Lenovo N100 laptop. When I run it (wireless disabled by switch on laptop), the drop down shows only my Intel Wireless adapter and not the Realtek wired adapter, the latter which happens to be my active connection. When I turn on the aforementioned switch which enables the bluetooth and wireless adapters, the drop down in Wntipcfg shows only the Bluetooth adapter. How can I fix this? Thanks, Phil Phil C.