Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco VPN Client v 4.6 and Cisco Aironet Wireless Adapter

Reply
Thread Tools

Cisco VPN Client v 4.6 and Cisco Aironet Wireless Adapter

 
 
cdonyi
Guest
Posts: n/a
 
      02-09-2005
Hi,

I am using a custom combination bundled install of the Cisco VPN Client
v4.6 and Cisco Aironet Wireless adapter. If an ethernet LAN pcmcia
card is installed in the laptop PCMCIA slot during the install, the
wireless card install waits until a card is inserted before proceeding
(as expected). In general if the vpn client install completes before
the Aironet wireless install trying a subsequent vpn connection over
wireless fails. However, If the vpn client is installed AFTER the
wireless LAN adapter, everything seems to work just fine (vpn over
wireless). I want to ensure the VPN client will always work regardless
of when the wireless adapter software is installed. Anybody with any
ideas to this behaviour? I notice during failure of vpn over wireless,
the log file complains about a problem starting the firewall.
Disabling the firewall did not alter this behaviour.

-Donald

 
Reply With Quote
 
 
 
 
Martin Bilgrav
Guest
Posts: n/a
 
      02-09-2005

"cdonyi" <> wrote in message
news: oups.com...
> Hi,
>


Hiya

> I am using a custom combination bundled install of the Cisco VPN Client
> v4.6 and Cisco Aironet Wireless adapter. If an ethernet LAN pcmcia
> card is installed in the laptop PCMCIA slot during the install,


Are you installing/inserting other NIC while installing software ?
I would not reccommend doing so.

> the
> wireless card install waits until a card is inserted before proceeding
> (as expected). In general if the vpn client install completes before
> the Aironet wireless install trying a subsequent vpn connection over
> wireless fails. However, If the vpn client is installed AFTER the
> wireless LAN adapter, everything seems to work just fine (vpn over
> wireless). I want to ensure the VPN client will always work regardless
> of when the wireless adapter software is installed. Anybody with any
> ideas to this behaviour?


The Wireless software should install first and then the VPN.
As both make dramastic changes to the IP stack.
A reboot is also required before everything works.

> I notice during failure of vpn over wireless,
> the log file complains about a problem starting the firewall.
> Disabling the firewall did not alter this behaviour.
>
> -Donald



HTH
Martin Bilgrav

>



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Aironet 350 series WLAN client adapter card can't connect to 1242 AP kelvin_yin Cisco 3 03-23-2009 01:51 PM
ExpressCard wireless adapter vs PC card wireless adapter =?Utf-8?B?a2V2aW5sYQ==?= Wireless Networking 6 12-21-2008 08:18 PM
Driver for Cisco Aironet 350 Wireless adapter. AM Cisco 6 02-06-2006 09:51 PM
Aironet 1200 and Aironet 1300 compatible? Andre Paetzold Cisco 2 12-09-2004 07:48 AM
Help with Cisco VPN client 4.0.1 (and 4.0.3) - The VPN client could not find the adapters GUID MP Cisco 2 12-30-2003 03:55 PM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57