XP Home - Internet Protocol(TCP/IP)Properties - Address Settings

I have set up a home wireless network. On my laptop which is connected to the
network I have set the Internet Protocol(TCP/IP)Properties to "Use the
following IP address" and filled in the IP address and the DNS address. The
wireless connection now works. However every time I switch off the laptop
then switch it on again the
Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP address
automatically" and I have to reset all the addresses again manually. I am
told that the addresses should be saved automatically. Can anyone advise why
this is not happening?

Thanks

Bryan

=?Utf-8?B?YnJ5YW40NQ==?=

Hi
Make sure that Windows Zero Configuration and the Original Manufacturer
software are not running in tandem.
My New Wireless does not work - http://www.ezlan.net/wireless.html
Jack (MVP-Networking).

"bryan45" <> wrote in message
news:C6C31CC5-82A7-4FAC-AC16-...
>I have set up a home wireless network. On my laptop which is connected to
>the
> network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> following IP address" and filled in the IP address and the DNS address.
> The
> wireless connection now works. However every time I switch off the laptop
> then switch it on again the
> Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> address
> automatically" and I have to reset all the addresses again manually. I am
> told that the addresses should be saved automatically. Can anyone advise
> why
> this is not happening?
>
> Thanks
>
> Bryan

Jack \(MVP-Networking\).

Hi Jack,

I have checked and the Windows Zero Configuration is running.

Should I stop it? If so how would I do this?

Thanks

Bryan

"Jack (MVP-Networking)." wrote:

> Hi
> Make sure that Windows Zero Configuration and the Original Manufacturer
> software are not running in tandem.
> My New Wireless does not work - http://www.ezlan.net/wireless.html
> Jack (MVP-Networking).
>
> "bryan45" <> wrote in message
> news:C6C31CC5-82A7-4FAC-AC16-...
> >I have set up a home wireless network. On my laptop which is connected to
> >the
> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> > following IP address" and filled in the IP address and the DNS address.
> > The
> > wireless connection now works. However every time I switch off the laptop
> > then switch it on again the
> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> > address
> > automatically" and I have to reset all the addresses again manually. I am
> > told that the addresses should be saved automatically. Can anyone advise
> > why
> > this is not happening?
> >
> > Thanks
> >
> > Bryan
>
>
>

=?Utf-8?B?YnJ5YW40NQ==?=

On Sun, 12 Nov 2006 18:46:01 +0300, bryan45
<> wrote:

> I have checked and the Windows Zero Configuration is running.
> Should I stop it?
I'd rather disabled the vendor's manager leaving WZC only.
The simpler - the better.

Tony.

Tony

Hi
Should you prefer using WZC, this might help in disabling the original
utility, http://www.ezlan.net/infestation#process
Switching WZC On or Off here, , http://www.ezlan.net/wzc.html
Jack (MVP-Networking).

"bryan45" <> wrote in message
news:486E1750-030C-4DE5-B1C9-...
> Hi Jack,
>
> I have checked and the Windows Zero Configuration is running.
>
> Should I stop it? If so how would I do this?
>
> Thanks
>
> Bryan
>
> "Jack (MVP-Networking)." wrote:
>
>> Hi
>> Make sure that Windows Zero Configuration and the Original Manufacturer
>> software are not running in tandem.
>> My New Wireless does not work - http://www.ezlan.net/wireless.html
>> Jack (MVP-Networking).
>>
>> "bryan45" <> wrote in message
>> news:C6C31CC5-82A7-4FAC-AC16-...
>> >I have set up a home wireless network. On my laptop which is connected
>> >to
>> >the
>> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
>> > following IP address" and filled in the IP address and the DNS address.
>> > The
>> > wireless connection now works. However every time I switch off the
>> > laptop
>> > then switch it on again the
>> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
>> > address
>> > automatically" and I have to reset all the addresses again manually. I
>> > am
>> > told that the addresses should be saved automatically. Can anyone
>> > advise
>> > why
>> > this is not happening?
>> >
>> > Thanks
>> >
>> > Bryan
>>
>>
>>

Jack \(MVP-Networking\).

I have stopped the WZC on the Laptop and again inserted the Internet Protocol
Settings. However again when I switch off the laptop then switch it on again
these settings have gone.

I still cannot work out how to stop the euipment. It is a D-Link DFE-520TX
10/100 Mbps Ethernet PCI Adaptor fitted to the Laptop with a D-Link DSL-G624T
Wireless ADSL2+ Router.

Bryan


"Jack (MVP-Networking)." wrote:

> Hi
> Should you prefer using WZC, this might help in disabling the original
> utility, http://www.ezlan.net/infestation#process
> Switching WZC On or Off here, , http://www.ezlan.net/wzc.html
> Jack (MVP-Networking).
>
> "bryan45" <> wrote in message
> news:486E1750-030C-4DE5-B1C9-...
> > Hi Jack,
> >
> > I have checked and the Windows Zero Configuration is running.
> >
> > Should I stop it? If so how would I do this?
> >
> > Thanks
> >
> > Bryan
> >
> > "Jack (MVP-Networking)." wrote:
> >
> >> Hi
> >> Make sure that Windows Zero Configuration and the Original Manufacturer
> >> software are not running in tandem.
> >> My New Wireless does not work - http://www.ezlan.net/wireless.html
> >> Jack (MVP-Networking).
> >>
> >> "bryan45" <> wrote in message
> >> news:C6C31CC5-82A7-4FAC-AC16-...
> >> >I have set up a home wireless network. On my laptop which is connected
> >> >to
> >> >the
> >> > network I have set the Internet Protocol(TCP/IP)Properties to "Use the
> >> > following IP address" and filled in the IP address and the DNS address.
> >> > The
> >> > wireless connection now works. However every time I switch off the
> >> > laptop
> >> > then switch it on again the
> >> > Internet Protocol(TCP/IP)Properties have gone back to "Obtain an IP
> >> > address
> >> > automatically" and I have to reset all the addresses again manually. I
> >> > am
> >> > told that the addresses should be saved automatically. Can anyone
> >> > advise
> >> > why
> >> > this is not happening?
> >> >
> >> > Thanks
> >> >
> >> > Bryan
> >>
> >>
> >>
>
>
>

=?Utf-8?B?YnJ5YW40NQ==?=