Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > Hardware > Cisco 2621 VLAN issue

Reply
Thread Tools

Cisco 2621 VLAN issue

 
 
CTEagle CTEagle is offline
Junior Member
Join Date: Oct 2006
Posts: 2
 
      10-31-2006
I have successfully configured a VLAN on a Cisco 2621 router using the following settings:

interface FastEthernet 0/1.7
encapsulation dot1Q 7
ip address 192.168.7.1 255.255.255.0

interface FastEthernet 0/1.8
encapsulation dot1Q 8
ip address 192.168.8.1 255.255.255.0

Now I want to add a 3rd VLAN using the following settings:

interface FastEthernet 0/1.9
encapsulation dot1Q 9
ip address 172.16.30.1 255.255.0.0

After I added the 1.9 interface to the router, the 1.7 and the 1.8 interfaces continued to communicate between each other but neither could communicate with the 1.9 interface.

Is it possible to set up the router so that communication can exist in the manner I described above? Am I missing a step?

Thanks in advance.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco C2900XL want ports to work on native vlan and switchport vlan paul1537 Cisco 0 05-15-2008 03:30 PM
Cisco 2621 router config issue BigMike82 Cisco 5 12-23-2007 06:49 PM
VLAN using 2621 and 2960G CTEagle Cisco 0 10-27-2006 03:56 PM
Cisco newbie with a routing problem with Cisco 2621 Rick Bruner Cisco 5 10-27-2006 02:55 PM
Cisco Softphone Vlan Versus Preexisting Hardphone Voice Vlan Tennisman Cisco 1 09-23-2005 02:57 PM



Advertisments