There are at least four versions of the XE3, and there are drivers for most
OS that can be reach from this page, I didn't however see anything for a
PCMCIA driver. You might try however updating the video drivers if you
haven't.
http://h20180.www2.hp.com/apps/Looku...y=Omnibook+XE3
David Hettel
"Alextym" <> wrote in message
news:E6E795E5-A0EB-4B4A-9B62-...
> Thanks for the tips. I checked the HP page, but couldn't find anything.
> Where
> can I find a driver for the PCMCIA adapter? I am quite a novice, and
> really
> don't have a clue...
> The strangest thing happend, though. The wireless network card started to
> work, for some reason. And than it turn off just as suddenly, and the
> computer crashed. Obviously that there is something wrong
>
> "LittleMoo" wrote:
>
>> Have you downloaded and installed the drivers for your PCMCIA adapter? Or
>> installed them off of the drivers CD? If you don't have these drivers
>> installed then XP won't recognize your PCMCIA adapter which in turn won't
>> allow it to recognize your network card.
>>
>> -Dan
>>
>> "Alextym" <> wrote in message
>> news:61E102AB-BF69-4F67-A3A4-...
>> >I have a HP Omnibook XE3, and had to replace the hard drive a week ago.
>> >I
>> > reinstalled windows XP and installed the drive for my network card
>> > (Jensen
>> > AirLink 6011). But when I put the cardbus into the socket, nothing
>> > happens.
>> > It seems like the computer doesn't notice that there is a new hard ware
>> > component at all.
>> >
>> > What could the problem be? I really appreciate any suggestions
>>
>>
>>