Getting MWI working on Sipgate

Hi,

I can not get MWI working on Sipgate.

I am using a Linksys (Sipura) 1001 adapter and have set it up as
explained on Sipgate's help page, but when I have a voice message, the
phone is not indicating it by either the dial tone or the message indicator.

Thanks for any help in advance.

James

James

James formulated the question :
> Hi,
>
> I can not get MWI working on Sipgate.
>
> I am using a Linksys (Sipura) 1001 adapter and have set it up as explained on
> Sipgate's help page, but when I have a voice message, the phone is not
> indicating it by either the dial tone or the message indicator.
>
> Thanks for any help in advance.
>
> James

I wonder if this is more spa1001 related than Sipgate....?

I'm having a similar issue, yet with voip.co.uk using an spa1001

On Fri, 29 Sep 2006 18:40:37 +0100, Jono <>
wrote:

>James formulated the question :
>> Hi,
>>
>> I can not get MWI working on Sipgate.
>>
>> I am using a Linksys (Sipura) 1001 adapter and have set it up as explained on
>> Sipgate's help page, but when I have a voice message, the phone is not
>> indicating it by either the dial tone or the message indicator.
>>
>> Thanks for any help in advance.
>>
>> James
>
>I wonder if this is more spa1001 related than Sipgate....?
>
>I'm having a similar issue, yet with voip.co.uk using an spa1001
>
I would guess that the settings on the 1001 are similar to some of
thise on the SPA-3000.
I think that these are the settings that affect voicemail indication.
On Voipfone a waiting message is indicated by an interrupted dial
tone. I don't have any other indicator of voice mail having been left.

User 1 Tab:
Ring Settings:-
VMWI Ring Splash Len: 0
Ring On No New VM: Yes
VMWI Ring Policy: New VM Available

Supplementary Service Settings:-
Message Waiting: No



Remove 'no_spam_' from email address.
Skype Free Zone!!

Jono wrote:

>
> I wonder if this is more spa1001 related than Sipgate....?
>
> I'm having a similar issue, yet with voip.co.uk using an spa1001

Conversely we are having no problem with MWI on a grandstream with
sipgate - so it might be an spa1001 configuration issue.

--
Nic

In article < .com>,
NicHughes <> wrote:
>
>Jono wrote:
>
>>
>> I wonder if this is more spa1001 related than Sipgate....?
>>
>> I'm having a similar issue, yet with voip.co.uk using an spa1001
>
>Conversely we are having no problem with MWI on a grandstream with
>sipgate - so it might be an spa1001 configuration issue.

I tried MWI in Sipgate some time back and it worked just fine on the
Grandstream phones I tried it with.

Gordon

nobody has it on voip.co.uk i dont think!

see if it works on voipfone.co.uk maybe

on 30/09/2006, Mr Man supposed :
> nobody has it on voip.co.uk i dont think!
>
> see if it works on voipfone.co.uk maybe

Ah, well, that may be the case.

I get the broken dial tone OK, however, It never clears, even when the
messages have been deleted.

On Sat, 30 Sep 2006 19:47:33 +0100, Jono <>
wrote:

>on 30/09/2006, Mr Man supposed :
>> nobody has it on voip.co.uk i dont think!
>>
>> see if it works on voipfone.co.uk maybe
Voipfone interrupted dial tone works fine and it switches off once the
message has been read.
>
>Ah, well, that may be the case.
>
>I get the broken dial tone OK, however, It never clears, even when the
>messages have been deleted.
>

Remove 'no_spam_' from email address.
Skype Free Zone!!