Yes you are missing something. The computer running ICS takes the place of a
router normally. Think of a router as being a one-way door. Everything
connected to one side of the router can see each other, every thing on the
other side will only see a door. By turning ICS on in the laptop, your
adding a door between the router and the laptop, So the router sees the door
and not the laptop, while the laptop sees a door and not the router. If you
turn the wireless router into an access point (turn off the DHCP server in
it) it should be possible to allow the laptop to serve DHCP request to the
rest on the network, but then the laptop would need to always be connect to
the network for the network to work.
--
David Hettel
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
DISCLAIMER: This posting is provided "AS IS" with no warranties, and
confers no rights
<> wrote in message
news: ups.com...
>I have a BlackBerry that I use to get access to the internet. I would
> like to also use ICS with my desktop. Would I be able to use a
> wireless router to link up the two computers and then go out to the
> internet via the computer that has the BB connection?
>
> I've been able to use the wireless router to have the laptop connect as
> well as a Cat 5 connection from the desktop to the wireless router.
> When I turn ICS on in the laptop (this is the computer with the BB
> connection), I am able to access the net with the laptop only and not
> on the desktop.
>
> Am I missing something?
>