Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > PDM on PIX 520 failing.

Reply
Thread Tools

PDM on PIX 520 failing.

 
 
Gary
Guest
Posts: n/a
 
      01-16-2005
Loaded new OS onto a PIX 520 (pix6.33) and PDM Manager (pdm-302.bin)

All seems fine. A show vers given below all looks good.

Added location command, hostname and domainname
pdm location 10.15.0.150 255.255.255.255 inside
pdm logging informational 100
pdm history enable
hostname pix520ur
domain-name pixpix.com

Added http command for an inside server
http 10.15.0.150 255.255.255.255 inside

Tried https://10.15.0.1 (PIX Inside IP) from IE and get an error about page
canot load. All security tabs are cheked in IE setup

Does the PIX need DES or 3DES license level to work ?

What have I missed. Loging on the PIX shows my https connections accepted
but then nothing.

Thanks
Gary

Cisco PIX Firewall Version 6.3(3)
Cisco PIX Device Manager Version 3.0(2)

Compiled on Wed 13-Aug-03 13:55 by morlee

pixel520ur up 4 hours 55 mins

Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 350 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0: address is 0002.b309.2901, irq 11
1: ethernet1: address is 0002.b309.2862, irq 10
2: ethernet2: address is 00e0.b602.af4a, irq 9
3: ethernet3: address is 00e0.b602.af49, irq 11
4: ethernet4: address is 00e0.b602.af48, irq 15
5: ethernet5: address is 00e0.b602.af47, irq 10

Licensed connections: 65536

Serial Number: 18043400 (0x113520
Running Activation Key: 0x69bfeb5d 0x70f288a6 0x06b243ca 0x3c1fdf8c
Configuration last modified by enable_15 at 02:25:43.748 UTC Sat Jan 15 2005


 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      01-16-2005
In article <hmkGd.23961$sf5.4793@lakeread05>,
Gary <(E-Mail Removed)> wrote:
:Loaded new OS onto a PIX 520 (pix6.33) and PDM Manager (pdm-302.bin)

:Added location command, hostname and domainname
:Added http command for an inside server

:Tried https://10.15.0.1 (PIX Inside IP) from IE and get an error about page
:canot load. All security tabs are cheked in IE setup

oes the PIX need DES or 3DES license level to work ?

I'm not sure offhand. You might, however, need to do a

ca generate rsa key 1024
ca save all

--
So you found your solution
What will be your last contribution?
-- Supertramp (Fool's Overture)
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 4) Michiel Cisco 0 08-25-2006 01:17 AM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 3) Michiel Cisco 19 08-24-2006 08:55 PM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 2) Michiel Cisco 2 08-22-2006 08:46 PM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT Michiel Cisco 4 08-22-2006 12:26 PM
Cisco Pix 520 OS Doug Scott Cisco 1 07-16-2003 06:30 PM



Advertisments