Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > SNMP configuration of Aironet1200 (ios based)

Reply
Thread Tools

SNMP configuration of Aironet1200 (ios based)

 
 
ian
Guest
Posts: n/a
 
      12-19-2004
Hi,

Could somebody explain where I am going wrong with my SNMP
configuration of my Aironet 1200AP.

I am trying to set up a new SSID, with a WEP key, some radius server
info and the ability to toggle requireEAP and requireMAC on and off.

The sequence of commands I have been trying is given below, this is
from the factory default config. After I blast the AP with this config,
I get the following problems:

1. I cannot manipulate the SSID in the web interface any longer
2. The radius server info never shows up in the web interface
3. If I try to set RequireMac and/or RequireEAP, the set request goes
through, but a get on OIDs shows them as false again.
4. I cannot associate at all with the device.

Any thoughts/help would be greatly appreciated.

Thanks
Ian

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfAuxSsidBroadcastSsid.1.1 = 1

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfAuxSsid.1.1 = "MyNewSid"

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-WLAN-VLAN-MIB::cwvlWlanEncryptionMode.0 = 2
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-WLAN-VLAN-MIB::cwvlWlanEncryptionMandatory.0 = 1
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfAuxSsidAuthAlgRequireMac.1.1.1 = 1
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfAuxSsidAuthAlgRequireEap.1.1.1 = 1
snmpset -v1 -mall -cpublic 10.8.200.112 \
RFC1213-MIB::ifAdminStatus.1 = 1

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-AAA-SERVER-MIB::casConfigRowStatus.radius.1 = 4
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-AAA-SERVER-MIB::casAddress.radius.1 = 10.8.200.109
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-AAA-SERVER-MIB::casAuthenPort.radius.1 = 1812
snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-AAA-SERVER-MIB::casKey.radius.1 = "secret"

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfVlanEncryptKeyStatus.1.0.1 = 6

snmpset -v1 -mall -cpublic 10.8.200.112 \
CISCO-DOT11-IF-MIB::cd11IfVlanEncryptKeyLen.1.0.1 = 13 \
CISCO-DOT11-IF-MIB::cd11IfVlanEncryptKeyValue.1.0.1 =
"zzzzzzzzzzzzz" \
CISCO-DOT11-IF-MIB::cd11IfVlanEncryptKeyTransmit.1.0.1 = 1 \
CISCO-DOT11-IF-MIB::cd11IfVlanEncryptKeyStatus.1.0.1 = 4

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create a PEAP Certificate using OpenSSL for use with IAS on an Aironet1200 Wil Cisco 3 11-18-2008 05:38 AM
SNMP module to query net-snmp milaus Perl Misc 3 08-31-2006 03:31 PM
Aironet1200/IOS- configure WEP keys via SNMP Ian Brewer Cisco 0 11-09-2004 05:41 PM
SNMP configuration help for newbie Nic Cisco 1 07-29-2004 09:42 PM
SNMP - Cisco - SNMP news.easynews.com Cisco 0 03-04-2004 10:44 PM



Advertisments