Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > ACLS not showing up in PDM or working properly

Reply
Thread Tools

ACLS not showing up in PDM or working properly

 
 
facciabruta
Guest
Posts: n/a
 
      08-30-2006
Hi,

I have some basic ACL's that i'm adding to the PIX 501 as follows:

object-group network WWWAccessOnly3
network-object host 192.168.1.2
network-object 192.168.1.4 255.255.255.252
network-object 192.168.1.8 255.255.255.248
network-object 192.168.1.16 255.255.255.240
network-object 192.168.1.32 255.255.255.254

access-list 109 deny tcp object-group WWWAccessOnly3 any neq www log
access-list 109 permit ip any any

These hosts are still getting through to all other ports other that the one
WWW access port allowed.

I also cannot see these ACL's within the GUI mananger when acessing the
config through the HTTPS console.

Any thoughts on what i'm doing wrong?

Thanks


 
Reply With Quote
 
 
 
 
facciabruta
Guest
Posts: n/a
 
      08-31-2006
forgot to assign the access-list to the interface:


access-group 109 in interface inside





"facciabruta" <(E-Mail Removed)> wrote in message
news:mMlJg.5986$(E-Mail Removed)...
> Hi,
>
> I have some basic ACL's that i'm adding to the PIX 501 as follows:
>
> object-group network WWWAccessOnly3
> network-object host 192.168.1.2
> network-object 192.168.1.4 255.255.255.252
> network-object 192.168.1.8 255.255.255.248
> network-object 192.168.1.16 255.255.255.240
> network-object 192.168.1.32 255.255.255.254
>
> access-list 109 deny tcp object-group WWWAccessOnly3 any neq www log
> access-list 109 permit ip any any
>
> These hosts are still getting through to all other ports other that the
> one WWW access port allowed.
>
> I also cannot see these ACL's within the GUI mananger when acessing the
> config through the HTTPS console.
>
> Any thoughts on what i'm doing wrong?
>
> Thanks
>



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT(ish): PBASE Images Not Showing Properly Ali Digital Photography 3 12-17-2007 08:30 PM
bitrate info not showing properly in explorer =?Utf-8?B?QnJpYW5rNTg=?= Windows 64bit 0 04-04-2007 10:00 PM
Info not showing up properly in Cisco Network Assistant? Pic... Calvin.Lai@shaw.ca Cisco 0 10-07-2005 05:15 PM
ACLs not showing hit counts on active UDP SYSLOG DigitalVinyl Cisco 7 04-08-2005 02:08 PM
catalyst 2900 acls not working Rick Cisco 0 11-28-2003 06:59 PM



Advertisments