«

Hi all,

I need to replace 2610 router by a new router 2621.

- Is it possible to use memory of 2610 on the 2621 ?
- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?

Thank You very much

Best Regards
NS

"ns" <> writes:
>I need to replace 2610 router by a new router 2621.

>- Is it possible to use memory of 2610 on the 2621 ?

Yes, as long as you don't mix and match XM vs. non XM models. (ie. you
can't take the memory from a 2610 and put it in a 2621XM, the XM takes
slightly faster memory modules. It may be possible to put XM rated
memory in the non-XM chassis).

>- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?

They'll be no issues here doing that.

ThankYou very much for your answer !!

Best Regards
NS

"Doug McIntyre" <> a écrit dans le message de
news:41c07258$0$183$ t...
> "ns" <> writes:
> >I need to replace 2610 router by a new router 2621.
>
> >- Is it possible to use memory of 2610 on the 2621 ?
>
> Yes, as long as you don't mix and match XM vs. non XM models. (ie. you
> can't take the memory from a 2610 and put it in a 2621XM, the XM takes
> slightly faster memory modules. It may be possible to put XM rated
> memory in the non-XM chassis).
>
> >- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?
>
> They'll be no issues here doing that.

i checked my 2621 router. it's tagged Cisco 2621XM !!

so, i can't use memory of 2621 on my 2621 router ?
is it true ?

Thanks a lot
NS


"Doug McIntyre" <> a écrit dans le message de
news:41c07258$0$183$ t...
> "ns" <> writes:
> >I need to replace 2610 router by a new router 2621.
>
> >- Is it possible to use memory of 2610 on the 2621 ?
>
> Yes, as long as you don't mix and match XM vs. non XM models. (ie. you
> can't take the memory from a 2610 and put it in a 2621XM, the XM takes
> slightly faster memory modules. It may be possible to put XM rated
> memory in the non-XM chassis).
>
> >- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?
>
> They'll be no issues here doing that.

"ns" <> writes:
>i checked my 2621 router. it's tagged Cisco 2621XM !!

>so, i can't use memory of 2621 on my 2621 router ?
>is it true ?


If you have an older non XM 2610, its unlikely the memory in it right
now will work in a 2621XM due to the faster memory bus in the XM models.

OTOH, the 2621XM probably came with alot of memory, they are shipping
pretty good ammounts now-a-days, 96M last time I checked or some such ammount.



>"Doug McIntyre" <> a écrit dans le message de
>news:41c07258$0$183$ et...
>> "ns" <> writes:
>> >I need to replace 2610 router by a new router 2621.
>>
>> >- Is it possible to use memory of 2610 on the 2621 ?
>>
>> Yes, as long as you don't mix and match XM vs. non XM models. (ie. you
>> can't take the memory from a 2610 and put it in a 2621XM, the XM takes
>> slightly faster memory modules. It may be possible to put XM rated
>> memory in the non-XM chassis).
>>
>> >- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?
>>
>> They'll be no issues here doing that.

Thanks a lot Doug

"Doug McIntyre" <> a écrit dans le message de
news:41c09d8d$0$175$ t...
> "ns" <> writes:
> >i checked my 2621 router. it's tagged Cisco 2621XM !!
>
> >so, i can't use memory of 2621 on my 2621 router ?
> >is it true ?
>
>
> If you have an older non XM 2610, its unlikely the memory in it right
> now will work in a 2621XM due to the faster memory bus in the XM models.
>
> OTOH, the 2621XM probably came with alot of memory, they are shipping
> pretty good ammounts now-a-days, 96M last time I checked or some such
ammount.
>
>
>
> >"Doug McIntyre" <> a écrit dans le message de
> >news:41c07258$0$183$ et...
> >> "ns" <> writes:
> >> >I need to replace 2610 router by a new router 2621.
> >>
> >> >- Is it possible to use memory of 2610 on the 2621 ?
> >>
> >> Yes, as long as you don't mix and match XM vs. non XM models. (ie. you
> >> can't take the memory from a 2610 and put it in a 2621XM, the XM takes
> >> slightly faster memory modules. It may be possible to put XM rated
> >> memory in the non-XM chassis).
> >>
> >> >- Is it possible to use Interface Controller E1 of 2610 on the 2621 ?
> >>
> >> They'll be no issues here doing that.
>
>