On 8 Dec 2004 12:31:35 +0200, Andre Paetzold <paetzold+> wrote:
~ Hello,
~
~ i've got an Aironet 1200 Accesspoint and I want
~ to expand our network to an unreachable (by network)
~ area on our campus.
~
~ I want to use an Aironet 1300 Accesspoint/Bridge
~ in bridging mode.
~
~ Is this possible, or must I also replace the 1200
~ with a 1300?
~
~ Thanks in advance.
~
~ So long,
~ Andre
The AP1200 can only play the role of an access point,
not a bridge. However, you can configure your 1300
as a workgroup bridge and have it associate with the
AP1200 to extend your network wirelessly to the remote area.
http://www.cisco.com/univercd/cc/td/....htm#wp1043295
That doesn't really give you too much background information
- try this one which is written for the AP1100 running
12.3(2)JA but which should be generally applicable to a
1300 in WGB mode:
http://www.cisco.com/univercd/cc/td/....htm#wp1040354
Cheers,
Aaron